Only show results available in Virginia? Ok

Thermal Waste Treatment Applications

  • Premium

    AutoChem - Process Safety

    Detect Thermal Hazards Early and Design Safety Into The Chemical Process. We must ask ourselves: How much heat will be generated under normal conditions? How will a change in condition, controlled or uncontrolled, change the rate of heat generation? Can our process equipment handle removing the heated generated? Answering these questions with speed and accuracy is necessary to ensure safe and efficient design and scale-up of synthesis reactions.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher,...

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Direct mercury determination in coal

    Introduction

    Mercury is one of the most toxic trace contaminant naturally occurring in the coals. During the coal combustion process at the coal-fired power plants mercury is released into the environment. To manage effectively the stack gas cleaning process, it is necessary to know the mercury content in the coal, and also in stack gas, liquid and solid wastes.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Flow measurement instrumentation for waste water treatment flow solutions

    With its high turndown and direct mass flow, our immersible thermal meters are the instrument of choice for measuring aeration basin air flow and monitoring digester gas. Our multivariable vortex meters are used to measure steam in the cogeneration processes, while our 

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Thermal waste gas purification of siliceous organic compounds

    Example: Electrical industry. Similar tasks: Electronic industry, Coating, Waste management.

  • Premium

    Medical Waste Processing

    Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has lot

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Industrial Solution for incineration & thermal treatment

    Waste incineration, including solid municipal and hazardous waste, biomedical waste and hazardous liquid are all continually under more stringent scrutiny by regulators. Macrotek has designed and supplied many integrated systems to meet most guidelines. In several installations, hazardous waste has been combined with radioactive waste, requiring nearly non-detectable emission levels for many of the contaminants. Macrotek has installed and tested systems for these processes with the results significantly...

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Waste management for dangerous wastes

    A wide variety of wastes are too hazardous to be disposed of by traditional means. Hospitals, clinics, laboratories, nursing homes, funeral homes, dental offices and veterinary clinics are just some examples of places that produce potentially dangerous bioactive waste, often referred to as biomedical waste. Proper disposal of biomedical waste is a complex process that must be carefully controlled to avoid serious public health risks. The waste must be placed in special bags, stored separately, transported in...

    By Terragon Environmental Technologies Inc. based in Montréal, QUEBEC (CANADA).

  • Evaporation technology for waste industry

    The leachate produced by the waste in the landfill is an extremely pollutant effluent that requires high effective treatment processes to comply with the very strict limits for discharging operations. EVALED evaporators are a technological solution which allow to exploit the biogas cogeneration for the full or partial power supply of the plant within the limits of the environmental regulations and to reduce the relevant costs for thermal energy and leachate disposal.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • RCRA Waste Processing

    With over 40 million tons of recycled waste in the U.S. each year, operators are fervently searching for innovative methods to treat and dispose of RCRA wastes. Vulcan® Systems' thermal desorption technology is a proven method for recycling RCRA wastes in a manner that is efficient, affordable, and compliant with the Resource Conveservation and Recovery Act of 1976. The technology devolatizes hydrocarbons and captures them in a condensor for potential use in fuel blending, while also allowing the delisted end...

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • SSI builds shredding systems for alternative fuels processing

    SSI designs and manufactures size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuels. SSI Shredding Systems, Inc. has been developing and refining a wide range of products and engineered system solutions to convert waste materials into usable fuels for industry. SSI has the experience, product range and desire to exceed your expectations.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Biomedical Waste Processing

    Presently,Biomedical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. United Tech Machinery has lots of experience in Biomedical waste processing, we offer kinds of professional shredders to handle the processing. The biomedical waste can be shredded into uniform in size, which is smaller than 50mm to improve the incineration efficiency. United Tech`s...

    By Zibo United Tech Machinery Co.,Ltd. based in Zibo, CHINA.

  • Reliable Shredding Technology for Pulper Ropes

    In addition to a homogenised granulate of your residual products, our customized shredding systems guarantee an optimal pre-product for further recycling or thermal utilisation in your plants. Our customised shredding systems not only turn your waste materials into a homogeneous granulate, but also provide an ideal pre-product for further processing and/or thermal recovery within your plant.

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

  • Reliable Shredding Technology for Waste Wood Recycling Industry

    Waste wood is a precious resource that is available in large volumes and may be used either for material recycling or energy production, depending on the quality grade. The rising cost of waste material disposal and a growing consciousness for the environment also contribute to the increasing importance of waste wood recycling. The term “waste wood” includes all woods and wood-based materials that have come to the end of their product lifespan and are thus considered waste.

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you