Waste Collection Applications

20 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Waste Collection ×

Waste Treatment for Green Waste

by MENART     based in Dour, BELGIUM

Green waste is organic waste collected after cleaning open green spaces, recreational zones, private gardens, greenhouses, sports fields, roads. Open-air burning, public rubbish/trash collection or incineration have numerous negative impacts and are often banned. Composting is therefore the most adapted treatment solution for green waste. Due to its specialisation in high-level equipment adapted to intensive use, Ménart equips composting platforms. Ménart’s machines are robust and easily serviced and offer total user satisfaction.

Waste handling in flight catering kitchens

by Envac AB     based in Stockholm, SWEDEN

Large catering kitchens at airports are operational more or less round the clock. They have to deal with enormous amounts of waste from incoming aircraft, food preparation kitchens and staff canteens. Compared with traditional manual refuse collection methods, an automated kitchen waste system is safer, more efficient, more hygienic – and cheaper in the long run.

Balers and compactor solutions for facility management industry

by Bramidan Balers     based in Bramming, DENMARK

The success of any waste handling or facility management contract depends on your ability to offer value adding and reliable services to your customers at the best possible quality compared to the investment. The customer’s needs vary and the right solution depends on several important factors.

Amusement parks/arenas/tourist attractions

by Envac AB     based in Stockholm, SWEDEN

Vast quantities of rubbish and waste appear rapidly in amusement parks, at major arenas or at popular tourist attractions. Litter bins are quickly overfilled, which makes the area look a mess and is inconvenient. An automated system for emptying litter bins and waste chutes enhances the environment on a number of levels.

Packaging Sorting

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

Packaging waste is mostly made up of different polymers, beverage cartons, paper and glass. Depending on the country in question, different collection systems apply and the material will invariably arrive in different conditions to the MRF’s (Materials Recovery Facility). However, this does not present us with a problem. At TOMRA Sorting, regardless of the collection system operated, we are able to optimally sort the valuable fractions with high efficiency and purity. We currently operate sorting units at packaging MRF’s in many countries including Belgium, Canada, Germany, Italy, The Netherlands, Spain, UK and USA.

Classification and identification of recyclable material

by Bruker Corporation     based in Billerica, MASSACHUSETTS (USA)

This level is expected to reach over 4 million tons by 2010. Companies that specialize in recycling carpet require a fast, reliable and accurate means of identifying the carpet face fiber type entering recycling streams. Collection of plastics for recycling is increasing rapidly. Plastic recycling faces one huge problem, plastic types must not be mixed for recycling. Even a small amount of the wrong type of plastic can ruin the melt. Whether it is a carpet or plastic, classification and identification of recyclable material can be achieved using Bruker Optics` state of the art spectrometer systems. Bruker Optics has applied the FT-NIR technology and experience to this demanding requirement, and offers the Carpet Analyzer as a dedicated solution for the recycling industry.

Solid Waste Collection

by JLM Equipment     based in Lake Wales, FLORIDA (USA)

We provide equipment for municipal solid waste collection. Including but not limited to commercial front loaders, automated side loaders, rear loaders, recycling trucks, grapple trucks, Dump Loc body supports, and X1R lubricators for the solid waste industry, recycling and bulky waste collection.

Processing of LCD screens

by Erdwich Zerkleinerungssysteme GmbH     based in Kaufering, GERMANY

The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain valuable raw materials, such as metals and plastics, which have to be recovered in such a way, that the environment is not harmed. However, recycling specialists, Erdwich Zerkleinerungssysteme GmbH, have now developed an alternative: The company from Kaufering has developed an automatic processing system that enables mercury and other valuable raw materials to be easily extracted and recycled in an environmentally-friendly way.

Balers and compactor solutions for industrial companies

by Bramidan Balers     based in Bramming, DENMARK

In today’s business environment every element of a company’s activity has an effect on the bottom line. Inefficient waste handling is time consuming, expensive and takes time and energy from what really matters.

Balers and compactor solutions for hotel & restaurants industry

by Bramidan Balers     based in Bramming, DENMARK

Warehouses and distribution centres are crucial crossroads where time is of the essence. Customers demand clockwork efficiency and there is no room for delays.

Balers and compactor solutions for storage & logistics industry

by Bramidan Balers     based in Bramming, DENMARK

Warehouses and distribution centres are crucial crossroads where time is of the essence. Customers demand clockwork efficiency and there is no room for delays.

Enterprise resources planning for the waste & recycling industry

by FWI Information Technology GmbH     based in Steyr-Gleink, AUSTRIA

THE CHALLENGE: NOT ONLY DISPOSAL, BUT ALSO PROCESSING. The waste management and recycling industry consists of companies acting as waste collection and landfill operators, processers (sorters, waste treatment specialists, shredders and recyclers) or traders in secondary raw materials.

Grease removing in wastewater pipes

by Carus Corporation     based in Peru, ILLINOIS (USA)

Whether a collection system is handling domestic, commercial, or industrial waste; grease accumulation causes problems in wet wells, lift stations and pipelines. Problems with grease include interference with wet well level controls, reduced wet well capacity, plugging of pipes and pumps, and unsafe working conditions.

Safe waste handling at airports

by Envac AB     based in Stockholm, SWEDEN

Large amounts of waste are generated at airports – onboard aircraft, in catering kitchens, at the restaurants, in the shops and in the administrative offices. Dense air traffic requires fast, efficient waste handling, while also observing a number of safety regulations. The Envac vacuum system meets all requirements.

Shopping Malls / Retail Shops

by Envac AB     based in Stockholm, SWEDEN

Shopping malls and retail shops can create a large amount of waste. Most of this is packaging material such as plastic, paper and cardboard that has to be recycled. The installation of an Envac vacuum system can ensure that the handling of this waste becomes easier.

Combustible Aluminium, Titanium and Magnesium Dust Collection

by DiversiTech     based in Montreal, QUEBEC (CANADA)

The consequences of an industrial dust explosion or fire are unthinkable - worker injury, loss of life, property damage, business interruption, and irreversible environmental harm. Few companies realize how many diverse and common industrial applications produce combustible particulates, or where in their facilities this catastrophic threat is settling. What is a combustible dust? “A combustible particulate solid that presents a fire or deflagration hazard when suspended in air or other oxidizing medium over a range of concentrations, regardless of particle size or shape” – NFPA 654? High Risk Applications Metalwork (aluminum, magnesium, or titanium and others) – cutting, grinding, or finishing Ceramics – raw product handling and enamel spray Chemicals – material handling, crushing, grinding, roasters, kilns, and coolers Coal mining – material handling, de-dusting, drying, air cleaning Food (flour, sugar, and others) – mixing, grinding, blending, bagging, and packaging Foundry – sand handling, tumbling mills, abrasive cleaning, and shakeout Pharmaceutical – mixing, grinding, blending, bagging, and packaging Rubber – mixing, grinding, talc dusting, de-dusting, and batch-out rolls Woodwork – woodworking machines, sanding, waste conveying?

LITTER PICKER Applications

by H. Barber & Sons, Inc.     based in Naugatuck, CONNECTICUT (USA)

The Litter Picker litter collection machine can perform many litter-picking application with ease. By adapting the same patented tine raking technology that made Barber`s SURF RAKE beach cleaners famous, the LP1`s raking conveyor is capable of picking both small and large materials. While it has the power to collect car bumpers, large rocks, full bags of trash, and tire retreads, its rows of offset tines capture cigarette butts and bottle caps with similar ease.

Electric bin lifts for refuse collection vehicles

by EcoNord Ltd     based in Reykjavik, ICELAND

EcoNord specialises in the design, production and sales of environmental friendly equipment and data systems for the waste management industry.

Vacuum systems in residential areas

by Envac AB     based in Stockholm, SWEDEN

As waste volumes continue to grow, more and more stringent demands are being made of waste handling with regard to hygiene and the environment. The Envac vacuum system for waste handling in residential areas is a long-term investment offering both financial and environmental benefits, as well as other added value.

Biogas recovery

by Geomembrane Technologies Inc. (GTI)     based in Fredericton, NEW BRUNSWICK (CANADA)

Collect valuable biogas from anaerobic digestion systems with a GTI gas collection cover. In waste-to-energy projects, the collected biogas can be used as a renewable fuel to generate process heat or electricity, helping to offset energy costs.

Need help finding the right suppliers?

Let the XPRTs do the work for you