Waste Compactors News

  • Printing company returns to Riverside for baling needs

    Flexographic printing company RR Flexo has enhanced its recycling capabilities by further investing in new equipment from Riverside Waste Machinery. No stranger to baling, the company has recently obtained a brand new RWM 450 HD machine, to deal with the large volumes of polythene waste produced by the firm on a daily basis. Founded in 1982 by the two main shareholders Ron Dodd and Richard Green ...


    By Riverside Waste Machinery

  • San Sac Group strengthens its machine offering by acquiring Orca Group

    San Sac Group grows substantially and strengthens its market position and offering within compaction machines further by the acquisition of Orca Group in France. Orca Group is the French market leading manufacturer and distributor of high quality horizontal balers, vertical balers and compactors under the brands Sacria, Galicier and Pressor. The group has more than 175 employees, including ...


    By Orwak AB

  • A Review of Filter Press Basics Versus Alternative Technologies

    INTRODUCTION Filtration experts, over the years, have discussed and debated filter presses and have indicated that soon they would be a thing of the past; the last filler press would be replaced by more modern equipment. Given that filler presses were amongst the oldest mechanical dewatering devices, this was a fairly plausible suggestion. However, now. almost half a century later, any ...


    By BHS-Sonthofen Inc.

  • Replacing Filter Presses and Manual Plate Filters for Removing Trace Solids from Chemical Slurries with Thin-Cake Candle Filter Technology

    Abstract: The BHS technologies of Vertical Candle Filters provide improved product quality with more efficient operations compared with filter presses and manual plate filters. Fully automatic operations provide for complete containment of the solids and liquids for reduced maintenance costs and overall project savings. Introduction As ihe chemical industry has changed and grown ...


    By BHS-Sonthofen Inc.

  • New Power Unit for MKII Baler

    In recent years Gradeall has been working with a trusted manufacturer of hydraulic components and control units to provide our portable and static compactors with a dependable, efficient, easy to operate intelligent control system. The MKII tyre baler in a response to feedback from our customers is now the latest machine in our range to ...

  • Slitting Line and Steel Coil Slitting Machine Manufacturers Rishbin

    Metal sheets or strips suppliers always need slitting machine and cut to length machine line for the production of metal sheets with different widths or lengths from GI, PPGI, or stainless coils in large quantities. A steel mill most ...


    By RISHBIN CO., LTD

  • Necessity is the mother of invention: The first example of the compact version of the M400 leaves the works.

    New compact construction: This single-shaft shredder is constructed that it is suitable for use in the smallest of spaces. ...

  • Big Hanna now ready to fly with Swedish Armed Forces

    FMV, SWEDISH ARMED FORCES, SWEDEN OR ABROAD Big Hanna is now ready to accompany the Swedish Armed Forces on missions abroad which means we are o.k. with a temperature range from -46ºC to +49ºC, 3-100% humidity, snow loads, storms, sand, dust, heavy rainfall and that is just the climate specs. The climate specs were solved by putting the Big Hanna into a ...


    By Susteco AB

  • 12th Eco Expo Asia Opens Today at AsiaWorld-Expo Features Public Day and New Startup Zone Outdoor & Tech Light Expo also Opens

    The 12th edition of Eco Expo Asia, organised by the Hong Kong Trade Development Council (HKTDC) and Messe Frankfurt (HK) Ltd, and co-organised by the Environment Bureau of the HKSAR Government, opened today at the AsiaWorld-Expo. The opening ceremony was officiated by Wong Kam-sing, GBS, JP, Secretary for the Environment of the Hong Kong Special Administrative Region (HKSAR) Government. The ...


    By Messe Frankfurt (HK) Ltd

  • New Smart In-Bin Compaction Solution

    Compact General Waste In 240 L Bins In Our New Waste Compactor Flex 4240! Smart Design – Easily Extendable The new model, 4240, is an in-bin waste compactor for standard two-wheeled 240 L bins. It is a robust and stable machine that, thanks to its compact design, takes up little floor space. The 4240 is safe and convenient to use and a good finish in combination with easy ...


    By Orwak AB

  • Manufacturers can benefit from trade shows, too!

    Many manufacturers hold the opinion that trade shows are not as valuable as they once were.  Increased exhibitor costs, travel expenses, and employee time before, during, and after the show are all cost prohibitive elements of trade shows.  Even with all of these expenses, trade shows are not guaranteed to create a tangible ROI for your business. Just as important as cost ...


    By Harmony Enterprises, Inc.

  • Riverside launches new baler for space-restricted sites

    Riverside Waste Machinery has introduced a new machine into its range, designed specifically for size-constrained client sites. The RWM 300LH is so-called because the robust machine is ideal for ‘low height’ spaces. At less than 2m tall it is much shorter than the majority of its medium-sized counterparts, but this does not impact on the equipment’s technical ...


    By Riverside Waste Machinery

  • Baling specialist expands team with new appointment

    North Yorkshire-based baler provider Riverside Waste Machinery has recruited Mic Harrison as lead service engineer. With a varied career, he initially trained to become a Navy marine mechanic at HMS Sultan, Plymouth, where he remained for five years. He has gone on to enjoy a number of engineering roles, working on a wide array of technical equipment. As part of his new role, Mic’s ...


    By Riverside Waste Machinery

  • What sets us apart from our competition?

    I was talking with a customer on the phone today about meeting him at an upcoming trade show, ISSA INTERCLEAN in Las Vegas.  One of his comments sparked a conversation that needs to be shared with a greater audience. The customer, (let’s call him Joe for this post’s sake) is not the prototypical purchasing agent or procurement ...


    By Harmony Enterprises, Inc.

  • SSI Product Spotlight: Pre-Load Compactors

    SSI founded its Pre-Load Compactor product line with efficiency as a core principle. SSI Pre-Load Compactors, with a capacity of 120+ tons per hour, remove an operational bottleneck to further streamline the waste transportation process. "Almost nearly as fast as you can get trailers moved around and in place, you’re pulling away with maximum trailer loads, that are road legal,” says ...


    By SSI Shredding Systems, Inc.

  • Two new small balers for easy waste compaction

    We have redesigned our B3 and revived our B4. Two small balers for recycling in Small Format Retail Stores and in hotels and restaurants. The balers offer you a lot of advantages and their small sizes make them easy to install even in tight spaces. 1. Low overall height Less than 2 meters (1885 mm) ...


    By Bramidan Balers

  • Kiverco Host Successful Compact Plant Demo Days for Dealers

    Kiverco’s dealer conference and demo days were a great success with the launch of the exciting, new Compact Plant range. The event, which was well attended by the majority of Kiverco’s European dealers, began at the Glenavon Hotel, Cookstown on Wednesday, with presentations from the sales and marketing team highlighting key details of the compact plant. The afternoon and subsequent ...

  • Yorkshire-based catering butcher invests in baler to help environment and boost business

    Family-run catering butcher Yorkshire Dales Meat Company has strengthened its recycling strategy by investing in a compact waste baler from Riverside Waste Machinery. The vertical RWM75 machine is being used to bale mostly cardboard waste which is generated from boxed meat delivered to the Bedale factory from other local farms. ...


    By Riverside Waste Machinery

  • MACPRESSE will attend ARABPLAST 2017 – Dubai, 8-10 January 2017

    As the biggest plastics, petrochemicals and rubber industry exhibition in the Middle East and North Africa (MENA) region, ARABPlast 2017, to be held between 8th and 10th January at Dubai World Trade Centre, is set to bring together all key players, experts and industrialists from around the world. The previous edition of ArabPlast saw the attendance of 906 exhibitors from 41 countries and ...


    By Macpresse Europa S.R.L

  • Macpresse @ Arabplast 2017 - Dubai, 8-10 January 2017

    As the biggest plastics, petrochemicals and rubber industry exhibition in the Middle East and North Africa (MENA) region, ARABPlast 2017, to be held between 8th and 10th January at Dubai World Trade Centre, is set to bring together all key players, experts and industrialists from around the world. The previous edition of ArabPlast saw ...


    By Macpresse Europa S.R.L

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you