Only show results in Virginia? Ok

Wet Waste equipment for Waste and Recycling

  • Premium

    Mellegard & Naij - Model RP - Ram Hydraulic Conveyor Press

    Ram Press RP is a hydraulic conveyor press that compacts, dewaters, and conveys screenings and wet waste. It consists of a pipe with a hydraulic ram that forces the material into a pipe system or a counter forcing device creating back pressure for compaction and dewatering.

    By Hydria Water AB based in Borås, SWEDEN. from Ram Hydraulic Conveyor Press Product line

  • Premium

    Mellegard & Naij - Model WP - Wash Screw

    Wash Screw WP is a combined pulling conveyor and wash press for screenings and wet waste. The material is conveyed to the wash press zone where a resistance gives retention time for washing and compaction. The material is partly shredded during discharge.

    By Hydria Water AB based in Borås, SWEDEN. from Wash Screw Product line

  • Premium

    Dürr Megtec - Spray Dryer Absorber (SDA)

    Dürr Megtec spray dryer absorber (SDA) technology provides effective control of SOx and HCl by the injection of finely atomized alkaline slurries into the gas stream. Unlike wet scrubbers, all water is evaporated, with no liquid waste stream generated.

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA). from Spray Dryer Absorber (SDA) Product line

  • Premium

    Mellegard & Naij - Model TP - Wash Press

    Wash Press TP is a screw press for washing, compaction och conveying of screenings and wet waste.

    By Hydria Water AB based in Borås, SWEDEN. from Wash Press Product line

  • Premium

    Mellegard & Naij - Model RK - Grinder

    Grinder RK shreds & grinds solids in water, sludge & waste. Grinder RK combines the advantages from comminutors and Industrial waste shredders. Treating both wet and dry materials in closed pipe applications as well as open channels. Counter rotating knifes ensures that all passing material is grinded. Twin shafted wet waste grinders are ...

    By Hydria Water AB based in Borås, SWEDEN. from Grinder Product line

  • Premium

    Mellegard & Naij - Model QS - Screw Disc Press

    Disc Press QS is a screw press for thickening and dewatering of sludge and wet waste.

    By Hydria Water AB based in Borås, SWEDEN. from Screw Disc Press Product line

  • Premium

    Delitek - Vacuum Based Food Waste Systems

    Requirements regarding food waste management according to Marpol Annex V. The regulations for the prevention of pollution by garbage from ships, clarified in the MARPOL Annex V, was revised and entered into force on January 1st, 2013. This Annex applies to all ships. 

    By Delitek AS based in Alsvaag, NORWAY. from Vacuum Based Food Waste Systems Product line

  • Premium

    Mellegard & Naij - Model CO - Spiral Conveyor

    Conveyor CO conveys screenings, sludge, sand and waste either by spiral screw or by flushing.

    By Hydria Water AB based in Borås, SWEDEN. from Spiral Conveyor Product line

  • Premium

    Inciner8 - Model I8-MMI - Medical Waste Incinerator

    The I8-MMI is more effective by design with our innovative 3 stage secondary chamber configuration. This makes this Incinerator machine the leader in its class when it comes to the concentration of emission and dioxin in the exhaust gases. They are suitable for complete medical, pathological, biological, camp waste, amputated Human body organs and ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Medical Waste Incinerator Product line

  • Premium

    Mellegard & Naij - Model SP - Screw Press

    Screw Press SP is used for compaction och conveying of screenings and wet waste. Screw Press SP forces the material into a pipe system or against a back force device like the Shredder MT which gives heavy mechanical agitation for high compaction and dewatering. The screw flights gives a pulsating treatment of smaller portions which also Increases ...

    By Hydria Water AB based in Borås, SWEDEN. from Screw Press Product line

  • Premium

    Delitek - Food Waste Disposers

    The choice of disposer size is determined based upon type and the volume of food waste or number of persons per meal. A higher motor power and larger grinding unit allows for, besides increased grinding power, also increased pumping and transport capacity of the grounded food waste through the water trap and into draining pipe. A larger model ...

    By Delitek AS based in Alsvaag, NORWAY. from Food Waste Disposers Product line

  • Premium

    Sebright - Model SC-4064 - Self Contained Compactor (2 Cubic Yard Capacity)

    Our newest self-contained model, the SC4060 is available in container capacities from 23 to 39 cubic yards, and has dual, crossed, 4” bore cylinders, resulting in 50,200 lbs of pressure. A great choice for higher volume, wet waste applications. A 1,200 gallon sump for excess liquids from the waste stream can be drained before the compactor ...

    By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from Self Contained Compactor (2 Cubic Yard Capacity) Product line

  • Premium

    AquaCritox - Advanced Hydrothermal Oxidation (HTO) Process System

    Our patented AquaCritox technology is unique. It uses an advanced hydrothermal oxidation (HTO) process to deliver a sustainable, safe and economical wet waste disposal solution - whilst also providing the potential to recover renewable energy and valuable resources.

    By SCFI Group Limited based in Bishopstown, IRELAND.

  • Premium

    Sebright - Model SC-4060-2-4 - Self Contained Compactor (2 Cubic Yard Capacity)

    The Sebright Model SC-4060-2-4 is a compactor and container, combined into a single effi cient unit that has a built in sump with up to 1200 gallons of liquid retention capacity. Because the Model SC-4060-2-4 is designed to reduce in volume refuse that is wet, it is ideal for restaurants, supermarkets, and hospitals, as well as any other location ...

    By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from Self Contained Compactor (2 Cubic Yard Capacity) Product line

  • Premium

    Delitek - Compact Food Waste System

    Requirements regarding food waste management according to Marpol Annex V. The regulations for the prevention of pollution by garbage from ships, clarified in the MARPOL Annex V, was revised and entered into force on January 1st, 2013. This Annex applies to all ships.

    By Delitek AS based in Alsvaag, NORWAY. from Compact Food Waste System Product line

  • Premium

    Delitek - Food Waste System

    Delitek AS has developed two different solutions in order to overcome typical problems with the wet waste from galley area. For vessels with small crew numbers, we have developed the FWS wet waste processing unit. This is a combination of a heavy duty food waste grinder and holding tank, in one compact unit. Still it is capable of dealing with the ...

    By Delitek AS based in Alsvaag, NORWAY. from Food Waste System Product line

  • Premium

    Bright Technologies - High Density Extruders for Solids Dewatering

    The High Density Extruders are used to dewater materials that are saturated by liquids, to extract liquids from many types of industrial refuse byproducts, or to remove liquids from many commonly used packaged products and beverages. Tested and proven time and time again, the High Density Extruder is the best performing, most efficient and most ...

    By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from High Density Extruders for Solids Dewatering Product line

  • Gyro Beach Lift

    It is towed by a 4X4 tractor with at least 100Hp power. It has greater working performance in terms of capacity and depth. This newest addition in our beach cleaning product line is designed to clean beaches of every type (dry and wet sand, pebbles) and has a bigger waste bucket and a bigger working speed. Its novelty is the vertically lifted ...

    By RAM EUROPE based in ORCHOMENOS, GREECE. from Gyro Beach Lift Product line

  • Shredders

    The shredders are renowned for their great durability, convenient handling and the high flexibility to modified shredding levels and materials. A major point for your success is the exact customization of the machines and plants to your individual needs. Do take advice and take the opportunity for a shredding test.

    By Entsorgungstechnik BAVARIA GmbH based in Unterschleissheim, GERMANY. from Shredders Product line

  • Model PST/2400 - Beach Cleaning Machines

    The PST/2400, the right machine for waste removal and oxygenation of beaches. A big simple structure, easy to handle. It is the result of years of study and tests which permit us to operate on beaches in any condition and to remove on dry as well as wet any type of solid waste (shells, bottles, tin caps, paper, stones, cans, gravel, seaweeds and ...

    By D. Zaintoudis Bross G.P. based in Agios Athanasios, GREECE. from Beach Cleaning Machines Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you