Water Monitoring Downloads
-
Premium
ChemLogic CL1 & CL2 - Dual-Point Gas Detector -Datasheet
The ChemLogic CL2 Dual-Point Detector provides continuous monitoring and quick response to low level toxic and corrosive gases. ChemLogic Detectors are low-maintenance offering reliable, interference-free colorimetric gas detection. The system utilizes ¼” tubing that allows samples to be drawn up to 150-feet for most gases. ChemLogic Detectors are easy to install. Simply plug them ...
-
Premium
ChemLogic - Model CL1 - Single-Point Gas Detector - Datasheet
The ChemLogic CL1 Single-Point Detector provides continuous monitoring and quick response to low level toxic and corrosive gases. ChemLogic Detectors are low-maintenance offering reliable, interference-free colorimetric gas detection. The system utilizes ¼” tubing that allows samples to be drawn up to 150-feet for most gases. ...
-
Premium
Myron L - Model UltrapenX2 PTBT5 - Dissolved Oxygen & Temperature Pocket Tester - Operation Manual
Thank you for purchasing the Myron L® Company ULTRAPENX2 ™ PTBT5 Dissolved Oxygen (DO) Pen. This instrument is designed to be extremely accurate, fast, and simple to use in diverse water quality applications. Advanced features include: Real time readings. Proprietary sensor design and microprocessor-based circuitry that measures DO with an accuracy of up to ± 2%. Temperature ...
-
Premium
Cosmos - Model XP-3310 - Handheld Combustible Gas LEL Detector (0-100%) - Datasheet
The portable Cosmos XP-3310 provides gas detection for environmental safety and spot check applications. When the target is set to Isobutane, Methane or Propane, a single unit can detect % LEL levels of up to 32 combustible gases. Simplified operation and a large digital display allow you to easily view gas threshold and concentration levels. This lightweight and compact detector features a ...
-
Premium
Cosmos - Model XP-3360 - Handheld Combustible PPM Gas Detector - Datasheet
The portable Cosmos XP-3360 provides gas detection for environmental safety and spot check applications. When the target is set to Isobutane, Methane or Propane, a single unit can detect PPM levels of up to 32 combustible gases. Simplified operation and a large digital display allow you to easily view gas threshold and concentration levels. This lightweight and compact detector features a rugged ...
-
Premium
New Cosmos - Model XP-3380 II - Handheld Oxygen Detector - Datasheet
The portable Cosmos XP-3380 provides oxygen detection for environmental safety and spot check applications. Simplified operation and a large digital display allow you to easily view oxygen levels. This lightweight and compact detector features a rugged construction. Built to endure the elements, it is tested to withstand water pressure equivalent to over 16’ of submersion and falls up to ...
-
Premium
Myron L - Model UltrapenX2 PTBT4 - Free Chlorine Equivalent (FCE) & Temperature Pen - Datasheet
Benefits: Reliable Repeatable Results. Accurate. Affordable. Easy to Use. Rugged Design. Ensure Product Quality. Reduce Waste. Protect the ...
-
Premium
multi EA 5100 C/N/S/X Elemental Analyzer - Technical Datasheet
General: Multi-matrix analyzer for liquids, solids, gases. Multi-element analysis, determination of carbon, nitrogen, sulfur and chlorine in one analysis cycle, no system refitting required. Easy to use, a library with preset standard compliant methods simplifies work and saves valuable analysis time. Outstanding robustness and sensitivity combined with best service and cost-effective 24/7 high ...
-
Premium
Gascheck - Model G - Handheld Helium Leak Detector- Brochure
GasCheck G Series handhelds are designed for the search and location of gas leaks. They feature an advanced micro thermal conductivity sensor for fast, effective detection of almost any gas or gas mixture down to cc/sec, mg/m³ or ppm ...
-
Premium
Myron L - Model CSA Series - Conductivity Sensor - Brochure
Wetted materials of construction are ABS plastic, with 316 Stainless Steel electrodes. An integral temperature element provides for automatic temperature compensation on both the CSATC and CSAR. The thermowell containing the temperature sensing element in its tip is exposed directly to the fluid stream, assuring rapid response for maximum accuracy. Potted construction ensures sensor reliability ...
-
Premium
Conductivity/Resistivity Sensor#CS40 for 750ii Conductivity/Resistivity Monitor/Controllers - Brochure
The Myron L Model CS40 sensor has been designed for a broad measurement range in difficult process conditions. It can be installed in submersion, insertion, or wet-tap configurations, and is good for most applications from high purity water to high chemical ...
-
Premium
Conductivity Sensor #CS50 and CS6O - Brochure
These sensors are designed for use in general purpose applications up to approximately 20,000 |vS/ppm, and provide outstanding chemical resistance. Open front end geometry resists clogging and reduces maintenance requirements to a ...
-
Premium
Conductivity Sensor #CS52 - Brochure
This sensor has a small footprint for its high probe constant of 10.0. Its size and economical pricing make it ideal for use in various OEM applications, such as skid mount R.O. systems, water treatment units, chemical dilutions, and many ...
-
Premium
Myron L - CS41 Sensor - Brochure
he Myron L Model CS41 sensor was designed for high pressure, high temperature Conductivity & Resistivity measurements, and is an ideal choice for boiler control applications. Blowdown control, condensate monitoring, leak detection on heat exchangers, and steam purity measurements are just a few of the many applications in which this rugged and reliable sensor can be ...
-
Premium
Myron L - CS41 Sensor - Brochure
he Myron L Model CS41 sensor was designed for high pressure, high temperature Conductivity & Resistivity measurements, and is an ideal choice for boiler control applications. Blowdown control, condensate monitoring, leak detection on heat exchangers, and steam purity measurements are just a few of the many applications in which this rugged and reliable sensor can be ...
-
Premium
Conductivity Sensor #CS51 - Brochure
Wetted materials of construction are 316 stainless steel and Teflon®*, with double O-ring seals at all points. The first EPR O-ring bears the brunt of process interface, allowing the second O-ring to maintain reliable sealing, free from chemical attack. An integral temperature element allows automatic compensation for maximum accuracy. Leads are 10 ft./3 meters ...
-
Premium
HANDHELD pH INSTRUMENTS - Technical Reference
Definition: pH is the negative logarithm of hydrogen ion activity in a solution. The Concentration ratio of hydrogen ions (H+) and hydroxyl ions (OH-) determine the pH value of a solution. Any hydrogen activity will produce a 59.16 mV/ pH unit across the glass membrane. The measurement is expressed on a scale of 0.0 to 14.0. Water with a pH of 7 is considered neutral (H+ ions = 10-7 and OH-ions ...
-
Premium
Standard Solutions And Buffers - Application Bulletin
All Myron L handheld instruments are factory calibrated with NIST traceable Standard Solutions having specific conductivity/ppm values. Myron L® Company Standard Solutions are made under strictly controlled conditions using reagent grade salts. These salts are mixed with deionized water having a resistivity of at least 5 megohms-cm purity. Myron L® Company Standard Solutions have an ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you