Only show results available in Virginia? Ok

Backwater equipment for Water and Wastewater

  • Backwater Valves

    A range of single-flap and double-flap valves for installation onto sewerage pipes.

    By Flexseal Couplings Ltd (Fernco Group) based in Wombwell, UNITED KINGDOM.

  • Pumpfix - Model F - Backwater Pumping Station

    PumpfixF pumps against backwater and discharges surface water. It protects drainage fixtures such as shower, sink, washing machine and outside steps down to the basement which are below the backwater level. The wastewater is discharged continually and without the use of energy to the sewer through gravity. In the event of backwater the pump ...

    By Kessel AG based in Lenting, GERMANY. from Backwater Pumping Station Product line

  • Mainline - Fullport Backwater Valve

    The Mainline #4963 Full-Port Backwater Valve is the ‘flagship’ of the company. Established in 1997, this valve has revolutionized sewer protection across North America with its patented ‘normally open’ gate design. This valve is typically installed in homes or buildings that have basements, cellars, crawl spaces or area ...

    By Mainline Backflow Products (Can) Inc. based in Edmonton, ALBERTA (CANADA).

  • Kessel - Backwater Valves

    Simply ensure that all below ground areas with open drainage fixtures are protected by a Kessel Backwater Valve. The Staufix Backwater Valve range manufactured by Kessel are equipped with free hanging vertical backwater flaps. These flaps ensure that the building's wastewater freely flows outwards through the valve, whilst at the same time prevent ...

    By Source One Environmental Ltd based in Barnsley, UNITED KINGDOM. from Backwater Valves Product line

  • NEUHOLD - Backwater Flap

    NEUHOLD backwater flaps are used in connection to surface, sewer and process water systems.Water discharging from the pipe opens the flap, however when the head increases on the downstream side, the flap is pressed against it's seal, preventing backflow. Backwater flaps require only a small head in the pipe to open the flap, as HDPE floats in ...

    By NEUHOLD Environmental Technology based in Gleisdorf, AUSTRIA. from Backwater Flap Product line

  • Staufix - Model SWA - Backwater Valve

    The twin flap backwater valve Staufix SWA can be used as central backwater protection according to EN 13564 type 2. It is suitable for showers, sinks and washing machines that are located in the basement. Cellar steps up to 5 m² can also be drained via the backwater valve, if penetration of rainwater into the building during ...

    By Kessel AG based in Lenting, GERMANY. from Backwater Valve Product line

  • Staufix - Model FKA - Motorized Backwater Valves

    The motorised backwater valveStaufix FKA can be used as central backwater protection for waste water containing sewage according to EN 13564 Type 3 F. It is suitable for toilets, showers, sinks and washing machines that are located in the cellar. Cellar steps up to 5 m² can also be drained via the backwater valve, if penetration of ...

    By Kessel AG based in Lenting, GERMANY. from Motorized Backwater Valves Product line

  • Kessel - Backwater Pumps

    Used widely as a flood protection measure, the system successfully pumps against backwater flow - wastewater is never allowed to build up, even in the presence of backwater. So whether protecting individual drainage fixtures such as sinks, showers and bath tubs or integrating a backwater / anti-flood valve or pump into a floor drain, we can advise ...

    By Source One Environmental Ltd based in Barnsley, UNITED KINGDOM. from Backwater Pumps Product line

  • Wapro - Inspection Access Chamber with WaBack

    Wapr Access Chamber is a complete inspection chamber Ø400 with DN110 connections. Inside the chamber is a WaBack backwater valve to prevent backflow. The ‘easy-remove’ backwater valve can be removed from ground level allowing easy rinsing and allows simple inspection. The WaBack module can be installed on sewage, drainage and ...

    By Wapro AB based in Karlshamn, SWEDEN.

  • Adapt-a-Valve - Inspection Chamber

    An Inspection Chamber is a clean-out generally installed at the property line of a building. It allows the municipality or city to access the sanitary or storm sewers without disturbing the building owner. The municipality or city can service the laterals to the building with cleaning equipment for blockages or they can camera the lateral for ...

    By Mainline Backflow Products (Can) Inc. based in Edmonton, ALBERTA (CANADA).

  • Straight-Fit - Backwater Valve

    The Straight-Fit Backwater Valve features a patent pending flapper, designed to smoothly guide cleaning and surveying equipment through the BWV, also allowing for safe withdrawal of the same, minimizing risk of damage to the flapper. The addition of a Smart- Curve snake guide also prevents damage to the valve body during snaking from the main ...

    By Mainline Backflow Products (Can) Inc. based in Edmonton, ALBERTA (CANADA).

  • Adapt-a-Valve - Extendible Backwater Valve

    The Adapt-a-Valve Extendible Backwater Valve was invented because there was a need to have easy access to enable servicing  of backwater valves deeper than 2 feet.  The only other options were expensive and unsightly ‘vaults’ or ‘access culverts’ in which someone had to crawl down to service the backwater valve. ...

    By Mainline Backflow Products (Can) Inc. based in Edmonton, ALBERTA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you