Only show results in Texas? Ok

Butterfly Valves services for Water and Wastewater

  • Industrial Valves Design

    A reliable partner for industrial valves design, Thanks to our swift design processes and custom made solutions, we provide the finest products and services in accordance with your needs and specifications, saving you time and eliminating unnecessary worries. 

    By IMP ARMATURE d.o.o. based in Ivančna, SLOVENIA.

  • HVL-L (Valve Locking)

    A technique approved by various water companies for isolating valves (most commonly butterfly valves) to support a double isolation or allow for a single isolation so that the risks incurred by man entry into pipe lines is reduced to a safely, quantifiable level.

    By Hydra-Ject Limited based in Conwy, UNITED KINGDOM.

  • HVL-L - Valve Locking Services

    A technique approved by various water companies for isolating valves (most commonly butterfly valves) to support a double isolation or allow for a single isolation so that the risks incurred by man entry into pipe lines is reduced to a safely, quantifiable level.

    By Hydra-Valve Limited based in Spondon,, UNITED KINGDOM.

  • PR2 Testing Services

    The API 6A Appendix F PR2 qualification has been specifically designed for components which will be commissioned in remote and hostile environments and gives engineers absolute confidence that their components can withstand the most arduous environments throughout their working life. The PR2 test elevates the component to extreme high and low ...

    By Vaseco Limited based in Winsford, UNITED KINGDOM.

  • Actuation Solutions

    Hobbs Valve can supply our triple offset butterfly valve range bare shaft, or arrange for actuation of the units should it be a requirement. These actuation options usually resolve in the form of manual gearboxes, but there are options for hydraulic, pneumatic or electric actuation, working with a number of our key partners.

    By Hobbs Valve based in Caerphilly, UNITED KINGDOM.

  • Value Repair & Reconditioning Service

    We offer total valve management with world class capabilities to repair and recondition various size ranges for all kind of valve. This includes: Isolation Valve – Gate, Globe, Check, Plug, Ball and Butterfly valves, High Pressure Valve, Pressure Relief Valves – Conventional, Balanced Bellows, Pilot Operated, Vacuum type, Control Valve ...

    By PT KOTAMINYAK INTERNUSA based in Jakarta, INDONESIA.

  • Maintenance and Revision of Industrial Process

    We are intervening in leakages, perforations and cracking problems of your suplance and coating baths in short time with our experienced staff and with right products. Demounting and mounting in spot for cracks, leakage and changing of spheral and butterfly valves in your polypropylene, polyethilene and PVC pipe lines. We are realizing redesigning ...

    By Barat Industrial Plastic Engineering Co. based in Kartepe, TURKEY. from Activities Service line

  • Flotech - AAR Railcar Valve Repair Services

    Railcar pressure relief valves reduce the number of non-accident releases of tank car commodities during railcar transportation.  Flotech  repairs Midland, McKenzie, Crosby and other relief valves in accordance with- AAR, DOT and the valve manufacturer’s repair guidelines. Flotech repairs the angle, ball and wafer style butterfly ...

    By Flotech, Inc. based in Jacksonville, FLORIDA (USA).

  • Services

    Industries Served: We provide quality materials and services to a broad spectrum of industrial, refining, oil field, energy, pharmaceutical, pulp and paper, and food processing concerns across the United States. Whether you are handling projects or day-to-day maintenance, we are sure to have the material you need to get your job done efficiently.

    By Bakersfield Pipe and Supply (BPS) based in Bakersfield, CALIFORNIA (USA).

  • Valve Repair & Refurbishment Services

    Over the years, SPP has acquired an unrivalled reputation in the specialised field of valve repair and refurbishment. Today, they are able to offer a comprehensive range of services covering all types, sizes and makes of valves. SPP ensure that your valves are overhauled to the highest possible standards within required time scales and with the ...

    By SPP Pumps Limited based in Theale Reading, UNITED KINGDOM.

  • Insert Valve Installation Services

    Insert Valve SpecsIFT can install Insert Valves on a pipeline without shutting down the system. Valves can be installed indoors or outdoors, on chilled or domestic water, and on air lines. Our customers include hospitals, industrial companies, mechanical contractors, and municipalities. By using the TEAM InsertValve; IFT installs a real AWWA spec ...

    By International Flow Technologies (IFT) based in Murrieta, CALIFORNIA (USA).

  • Fluid Catalytic Cracking (FCC) Services

    Delta Controls is an international service and repair center for refurbishment, overhaul and modification of FCC slide valves, plug valves, ball valves, gate valves and butterfly valves. Including all controls together with associated pneumatic/hydraulic/electric actuators.

    By Delta Controls BV / Veenstra Group based in Emmen, NETHERLANDS.

  • Service

    TEMSCO, Inc. is a sales and service company that targets municipal water and wastewater treatment equipment. TEMSCO is equipped to handle service, maintenance, troubleshooting and warranty issues all on manufactured equipment we represent. Our technicians are factory trained and authorized, but are located in the metro Atlanta area for quick and ...

    By Templeton & Associates based in Suwanee, GEORGIA (US) (USA).

  • Flotech - Digester Capping Valve Repair Services

    Flotech specializes in the repair and re-manufacturing of many rotary valve products (Metso | Neles | Jamesbury) for the Paper and Pulp Industry including automated ball, butterfly, relief, control and capping valves.Repairing capping valves back to original tolerances is crucial for safety, trouble free operation of the automated filling of wood ...

    By Flotech, Inc. based in Jacksonville, FLORIDA (USA).

  • Field Service

    Our certified field service technicians have the expertise to diagnose and repair valve and actuator-related problems on-site on all types of valves to minimize or eliminate downtime. They are focused on getting you back up and running as quickly as possible. Each job site has its own dedicated service truck for installations, site audits, ...

    By Lockwood International based in Houston, TEXAS (USA).

  • Aftermarket Services

    Whether you need replacement valve parts or a major valve repair, you can rely on Pratt. At Henry Pratt Company, we understand valves and what it takes to repair them. When repairs or replacement parts are required, the best protection you can buy for your valves is the advice of a professional product representative to help you make informed ...

  • Filter Remediation Services

    Pureflow filtration Div. offers remediation services for existing arsenic, iron, and manganese removal, pressure and gravity, filtration systems.  Our field personnel are qualified to inspect / troubleshoot on-line filter systems, perform field pilot filter studies to optimize filter efficiency, and offer recommendation for improvement of ...

    By Pureflow Filtration Div. based in Whittier, CALIFORNIA (USA).

  • Flotech - Valve Actuators and Controls Services

    Our valve technicians are trained in mounting, repairing and servicing valve actuators from a variety of valve actuation manufacturers, including QRTCO, PRATT, Morin, Keystone,  Unitorq, Biffi, Limitorque, Promation Engineering and others.

    By Flotech, Inc. based in Jacksonville, FLORIDA (USA).

  • Metallurgical Service

    The company valve application in metallurgical engineering, alumina behavior mainly used in metallurgical industry abrasive slurry valve (in current cut-off valve), adjust steam trap. Main steelmaking industry need metal sealing ball valve, butterfly valve and ball valve, globe flash oxide and four-way reversing valve.

    By Tianjin OTS Valve Manufacturing Co.,Ltd based in Tianjin, CHINA.

  • Fluid Handling

    The fluid handling sector is characterised by its high demands in terms of quality, precision and innovation. We have been manufacturing and distributing product ranges under the Cepex brand name for over 30 years for the most demanding industries: the chemical and petrochemical industry, the cooling systems industry, the pharmaceutical industry, ...

    By Fluidra based in PolinyĆ , SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you