Anguil`s Food and Bakery industry experience provides reliable solutions for your emission control challenges. We have worked on a wide range of applications: achieving a high destruction level of ethanol from bakery ovens, chaff and particulate from coffee roasting, efficiently destroying grease from frying and rendering operations, handling smoke house emissions, and maintaining required opacity and odor levels from confectionery and gum manufacturing.
In the food and beverages industry, ceramic membranes made by atech innovations gmbh are used for filtering or clarifying beverages such as beer, wine and fruit juices, and for fractionating milk proteins.
For PM emission control in very high temperature exhaust streams ( >600ºC ), such as gasification, pyrolysis and incineration, traditional bag filters following temperature exchangers, ceramic filters, or scrubbers are used as end stage dedusters. For most arrangements, a primary high temperature separator, namely a cyclone, is important to reduce as much ash and char as possible. A good efficiency is important to reduce concentration of solids to the final stage dedusters, avoiding plugging of scrubbers...
CFC usage in industryAlthough the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% efficiency.
QUA’s CeraQ ceramic membrane modules
are designed for challenging water and
wastewater applications. The CeraQ
modules consist of 3.5 mm ID ceramic tubular
elements potted into bundles for various
surface area requirements. The module is
capable of removing virus, bacteria, colloidal
matter, submicron or micron sized suspended
particles, oil and organics from a wide range
of fluids, including drinking water and
industrial wastewater to economically meet
variety of treatment objectives or to recycle
Mantec has at your disposal a range of separation and filtration technologies providing unique, cost-effective solutions to our customers’ processing challenges. Predominantly we offer products including ceramic filtration solutions, membrane separation technology, hygienic housings and complete crossflow filtration systems.
Three Steps of CEMS:
1st Step: Gas Sampling
2nd Step: Gas conditioning and treatment
3rd Step: Measurement/Calibration
In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part.
The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance
2, Filtration Grade: usually 2 or 3 micron
We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from parts and equipment without the hazards associated with solvents. When rinsed properly our cleaners leave no residue and your precision parts are ready for further processing. Products are available for manual and automated cleaning systems. only qualitative production for all transportAn economical 1-2%...
Nanjing Tangent Fluid Technology Co., Ltd, a high-tech company for liquid separation in process industry, has cooperations with domestic institutes and European famous membrane companies for membrane technology.Tangent Fluid has a manuafaturing plant and R&D center in Nanjing, where we can design and manufacture filtration equipments of Microfiltration/Ultrafiltration/ Nanofiltration /Reverse Osmosis, and make research and development for new process and technology based on membrane process. Tangent Fluid has...
QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes).
Our filtration products help you
Today ceramic MF/UF membrane filtration for treatment of drinking water is becoming more and more accepted as a viable treatment method. This trends is mainly driven by an increasing demand for a more effective removal of especially challenging feed water containing:
Powerful magnetic separators for the removal of tramp metal from raw materials and for removal of fine iron from ceramic slips and glazes. High intensity electro magnetic filters give maximum levels of purity.
Mantec’s extensive range of products and is well positioned to help Pharmaceutical and Chemical customers in all stages of development and manufacturing optimization. Our membrane separation technology and heavy duty, chemically resistant ceramic filters offer effective solutions for arduous process conditions.
Water contaminated by flood, fire, earthquake, tornado, sewage, pesticides, heavy metals, and bacteria can be cleaned in a 1.5 or 3-gpm portable unit. The units are small and light allowing them to be carried in a jeep or pickup and operate off of a single phase 110 or 220-volt generator. The self-priming pump feeds water into a skid mounted electrocoagulation system followed by a self-cleaning 0.2-micron ceramic filter. Electrocoagulation causes bacteria, pesticides, heavy metals, and silt (suspended solids) to...