Chemical Water Treatment Software For Water And Wastewater
-
Showcasebased in CANADA
SIMBA#water is a process simulator for modeling, simulation, optimization, and management of wastewater treatment plants and beyond. It provides process simulation capabilities for sewers, wastewater treatment plants, and ...
-
Premiumbased in USA
Visual Water Designer is an all purpose water software tool providing users with many of the calculations encountered in water and wastewater design and analysis. Visual Water Designer offers a hydraulic analysis section that focuses on hydraulics and pumping system analysis and a section that covers process calculations for almost all of the various treatment processes encountered in ...
-
Premiumbased in GERMANY
AQUA DESIGNER is a WWTP software tool for designing the various processes of a wastewater treatment plant, from mechanical treatment to biology and sludge treatment. All common process variants are available for selection with regard to the calculation basis, the process and the design. Planning is supported by many auxiliary functions. As a result, AQUA DESIGNER provides comprehensive ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
AERZEN has the best machine technologies for the job, with Blower, Hybrid and Turbo. AERsmart, the new intelligent machine control, raises their performance even further. AERsmart distributes air flows optimally between the various technologies and their individual efficiency levels. End result: standalone efficiency levels close to the theoretical maximum. Additional savings of up to 15%. ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The NIVUS Web Portal is a comprehensive data management system for storage and provision of measured data. Thanks to storage on the web portal there are versatile options available to analyse readings, for system verification, data forwarding and alerting up to the creation of complete ...
-
Premiumbased in GERMANY
The aeration system is the most important equipment of a wastewater plant. 75% of the energy used for the wastewater treatment is covered by the aeration system. The correct design of the aeration system is the basis for a good operation and the operational costs. As the energy costs are the main cost value of an aeration system, a real comparison of different systems must concern both the ...
-
Premiumbased in USA
Visual Hydraulics is a state of the art, flexible modeling tool. It is used primarily for modeling the hydraulic characteristics of water and wastewater treatment plants, and is capable of analyzing entire hydraulic profiles. The software follows the traditional method for analyzing water surface profiles: a downstream control point is selected, and the hydraulic profile is then determined ...
-
Premiumbased in CANADA
The current version 5.0 of SIMBA# brings many improvements in the user interface and in the numerical properties of the simulation kernel but above all many model extensions. The most important changes are listed in the release notes. As a highlight we would like to mention here the implementation of the DWA volume T4/2016 "Design of sewage treatment plants in warm and cold climate zones" in the ...
-
Premiumbased in UNITED KINGDOM
ADMS-Airport is a comprehensive modelling tool for air quality management of airports. It has many of the features of the ADMS-Urban model and includes allowance for all relevant emission sources at airports and utilises algorithms designed specifically to model dispersion from aircraft ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Robotic Analyzer Light package contains all the components for a fully automated titration or measurement in the smallest possible space in a minimum of time. In addition to the Robotic Titrosampler Basic with a rack for 22 samples in 120 mL PP beakers, the package also includes a rod stirrer, a peristaltic pump and a Dosino with 20 mL dosing unit and the OMNIS control software. Only ...
-
based in CANADA
CT requirements continually change with water conditions, and disinfectant doses should reflect these changes. The Online Disinfection Manager (ODM) automatically calculates the right concentration for current conditions. A simple, fast and easy to use unit converter built specifically for wastewater professionals. WaterUnits offers unit conversion between various common Metric (SI) and Imperial ...
-
based in USA
Wastewater facilities have a unique opportunity to drive O&M savings and monetize thermal energy embedded in wastewater. Every $1 in recurring O&M savings creates an opportunity for $8-$10 in capital spending without user charge increases. Aquasight’s APOLLO creates savings and helps get the most out of wastewater ...
-
by Promium LLCbased in USA
Bring a new level of efficiency to your laboratory. Drive productivity and improve regulatory compliance with intuitive workflow, dynamic analytical capabilities, and strong data management. Streamline and automate to increase efficiency. Eliminate manual activities and paper, and reinforce rigorous scientific discipline from sample collection to final ...
-
based in GERMANY
With the effluent management system SAWACO (SAve WAter COsts) you will definitely reduce the waste water load discharged into the final effluent – and with that make a valuable contribution to the protection and preservation of our environment. With this decision support system you also reduce waste water costs in a significant way, by which the profitability of your company is ...
-
based in USA
Version 1.0 of this model has been trained using thousands of pictures taken by Ryan Hennessy Wastewater MIcrobiology from a wide range of municipal and industrial wastewater treatment systems throughout predominantly the United States and Canada. The model has been trained for a high variety of microbe types and conditions which include the following list and recommended magnifications for ...
-
based in UNITED KINGDOM
Smart Flow Predictor is a module of Intelligent Sewer Suite that allows accurate predictions on upcoming flows or levels at the following locations; Individual points in a sewer network. Pumping stations. Wastewater treatment works. By leveraging hyperlocal accurately forecasted rainfall prediction systems, the flow and level predictions are accurately provided in both wet and dry weather ...
-
by Meersensbased in FRANCE
Access Air quality, Pollen, Noise pollution, Water quality, UV and Weather data in realtime anywhere on ...
-
based in GERMANY
FLADIS is a program system for the analysis and visualisation of observational network data. FLADIS calculates the spatial distribution of air pollutants, such as PM10, NO2, NO, O3 and benzene, from point measurements and model simulation runs. It combines interpolated measured data and modelling results for each time step for which data is ...
-
based in CANADA
Ensure safe drinking water, balance compliance with both DBP and microbial regulations and achieve cost savings with WatPro. WatPro uses the EPA-developed CT approach to calculate chemical inactivation of Giardia and viruses while simultaneously estimating formation of DBPs. Using raw water quality parameters such as pH, TOC and SUVA, chemical dosages (e.g., alum, ferric chloride, lime , ...
-
by EnviroSimbased in CANADA
The BW Controller augments BioWin models with a range of process control simulation capabilities commonly employed in wastewater treatment systems. BW Controller enables evaluation of improvements in online measurement technology, and development of more sophisticated control strategies. Flexible and easy to implement, BW Controller simulates advanced control strategies and various controller ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you