Applications: For extractive gas analysis. For emission and process monitoring. For continuous detection of liquids in the analysis system. For protection of gas analysers against damage by inrush of liquids. To switch off the sample gas pump or to switch a valve.
Applications: For extractive gas analysis. For emission and process monitoring. Buffer vessel for collection of condensate formed at sample gas coolers and pre-separators. For connection of condensate pumps JSR-25 or automatic liquid drainers 11-LD.
TD-500D featuring the least expensive, lightest, smallest, easiest to use, most accurate and most repeatable device on the market for measuring crude oil and condensates in produced water, de-salter tail water, tank bottoms, cargo heaters, or anywhere that crude oil comes in contact with water.
Applications: For extractive gas analysis. For emission and process monitoring. For continuous condensate removal, e.g. at JCT- sample gas coolers. For mounting in gas conditioning systems and in sample gas coolers. Combinable with condensate pre-separators.
A heated device for efficient real-time collection of nosespace air samples and introduction into a PTR-MS inlet system. In food, flavor and fragrance science, panelists smell or taste products and a scientist would like to directly measure what the panelist tastes with an quantitative, real-time method such as PTR-MS. For the direct introduction ...
The PHC, Parallel Hybrid Condenser, is an induced draft evaporative condenser available in capacities from 208 to 2,050 nominal ammonia tons (897 to 8,844 kW). The PHC combines high efficiency PVC crossflow fill with Evapco's latest coil technology featuring the exclusive CROSSCool internal tube enhancement for superior induced draft, parallel ...
SHIMADZU AIMs to provide analysis systems for all users. The system is automated to ensure all steps performed quickly and easily. All our accumulated know-how in micro analysis is concentrated in the AIM-9000 to strongly support analysis.
RV N represents the innovative series of the RV line, designed for oily wastewater treatment in the Mechanical and Surface Treatments Segments. Each model is skid mounted (small footprint), modular, flexible, fully automatic and ready to use thanks to the Plug & Play system. The Mechanical Vapour Recompression Natural Circulation allows to ...
For Compressed Air Treatment. The new SDV250 is a solenoidoperated, fully electronic, digital, LED, automatic condensate drain valve, allowing the operator to preset the drain cycle and duration cycle times. Manual override and “push to test” feature ensures efficient and accurate operation at all times.
Benefits & Characteristics; High chemical resistance. Very low drift. Wide temperature range. High humidity stability.Resistance to condensation. Customer specific sensor available upon request. Fast recovery time.
For temporary buffering due to fluctuations in gas production or inoperable production systems or consumers, a storage of the produced biogas is required. ennox has developed the NOXstore gas holding system for the zero pressure or fluctuating pressure storage of biogas from the digester.
High chemical resistance, Very low drift, Wide temperature range, High humidity stability, Condensation resistant, Suitable for extreme environments, Fast recovery time, Customer specific sensor available upon request.
A high purity, high dielectric, rapidly evaporating, non-flammable aerosol spray, contact and circuit board cleaner. Specially formulated for removing oil, grease, condensation, dust and other particulate matter from sensitive electronic parts. Quick drying formula will not harm most plastics, paints or rubbers. This solvent system has tested safe ...
Benefits & Characteristics▪ Fast recovery time ▪ Heating of humidity sensor (humidity sensor and heater on one chip)▪ Temperature measurement on-chip ▪ Very low drift▪ Wide temperature range ▪ High humidity stability▪ Condensation resistance ▪ Customer specific sensor available upon request▪ High chemical resistance