Corrosion Control Equipment For Water And Wastewater
-
ShowcaseManufactured by Advanced Equipment and Services, Incbased in USA
Specifications: 3 membranes 4x40. 7.5 HP stainless steel RO pump. Weight: 420 lbs. (191kg). Size: 36x19x71 inch. (91x48x180 cm). 3/4” feed connection. 1/2” product connection. 3/4” reject ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita´s broad range of scale and corrosion inhibitors for open cooling ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
When a purification has to be scaled up, GlasPure offers maximum flexibility in terms of scale and separation requirements. The glass columns are designed for sample amounts over 300 g and pressure up to 50 bar (725 ...
-
PremiumManufactured by Intecna srlbased in ITALY
Regarding PIPELINE DEWATERING OPERATION, it is well known that natural gas hydrates are clathrate compounds in which natural gas molecules are encased in cages of water molecules to form a solid ice-like ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen ConoFlex Urethane No. 381.61 is an aromatic polyurethane lining that provides excellent flexibility and impact resistance for concrete, steel, and other substrates. No. 381.61 is a chemically resistant, lining combining toughness, elongation, and low permeability with a fast cure time. Typical uses: flexible lining for various applications, including primary/secondary containment ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Aguapoxy 28 is a three component, water cleanable, general purpose epoxy grout for bonding chemical resistant masonry units. The No. 28, combined with brick or tile, offers rapid installation and clean up with potable ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s thermal and catalytic oxidizer technologies are capable of destroying halogenated organic acids and mixed organic vapor contaminants that are discharged from a variety of industrial process streams. We have also developed several destruction devices specifically for soil and groundwater remediation sites contaminated with chlorinated compounds such as carbon tetrachloride, ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen ConoThane Glaze provides outstanding gloss and color retention along with excellent resistance to abrasion and chemicals, including solvents. This product matches the performance of baked finishes and may be used on properly prepared and primed substrates of nearly any composition. ConoThane Glaze 310 white and clear are U.S.D.A. approved. The product is suitable for both interior and ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Specifications: 3 membranes 4x40. 2 HP stainless steel RO pump. Weight: 395 lbs. (179kg). Size: 36x19x71 inch. (91x48x180 cm). 3/4” feed connection. 1/2” product connection. 1/2” reject ...
-
PremiumManufactured by Sauereisen Inc.based in USA
RestoKrete Hi-Build Filler Compound - No. 209HB is an epoxy material specifically designed to refinish large surfaces and open joints within concrete. No. 209HB provides a smooth finish and appropriate bonding surface for epoxy topcoats. RestoKrete Hi-Build Filler Compound is formulated to minimize sagging which permits thick application of the product where necessary. Do not use with vinyl ester ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Epoxy Polymer Concrete - 165 is a castable material for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. 165 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming methods for 165 are similar to those used for Portland ...
-
PremiumManufactured by Sauereisen Inc.based in USA
The Sauereisen Fast-Trak Lining Series is a fiber-reinforced lining system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak has the chemical resistance to withstand the bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and temperature ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Thermal Potting Cement No. 11 is primarily used where high electrical insulation and thermal conductivity are desired. No. 11 is a chemical-setting cement ideal for potting applications subject to high temperature and thermal shock. Thermal Potting Cement No. 11 is formulated to be compatible with most metal alloys that it may contact. The cement is supplied in powder form and need ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen RestoKrete No. 208 is a substrate repair material and water resistant barrier for prevention of inflow and infiltration in concrete or brick substrates. RestoKrete No. 208 is an epoxy-based mortar specified for substrate repair where structural integrity needs to be restored. RestoKrete No. 208 is designed to fill voids, irregularities, and air pockets in ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Brentwood is a leading supplier of Koroseal, also known as perforated plate wrap or battery perf, a material used to prolong battery life by preventing corrosion of the internal lead plates. We have been manufacturing this specially formulated PVC material for nearly 40 years, since the design and installation of our first custom press machine in the 1970s. Today, we operate a vertically ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Water is a key resource in the food & beverage industry. Steam is generated in boiler systems and used for food processing with either direct or indirect contact to food. In this sensitive industry high steam purity is essential to assure the required product quality. On the other hand, safe and efficient boiler operation is another basic requirement to assure long term protection against ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Insa-Lute Hi Temp Cement No. 7 is a sodium silicate adhesive cement used by leading electrical manufacturers. The cement exhibits outstanding resistance to heat and electricity. Typical applications include instrumentation assembly, coating and embedding of resistance wires, and high-temperature ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Sprays as an instant foaming, deep penetrating liquid that flows inside intricate chains and cables where the greatest stress occurs. Provides a thick foam that clings to vertical surfaces. As foam breaks, lubricant penetrates into wire rope, rollers, pins, links and bushings of chains. Leaves a lubricating film, which reduces friction, wear and corrosion. When applied to wire ropes and cables, ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Specifications: 3 membranes 8x40. 5 HP stainless steel RO pump. Weight: 810 lbs. (367kg). Size: 41x32x73 inch. (104x81x180 cm). 1-1/4” feed connection. 1” product connection. 1” reject ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Electric Resistor Cement No. 78 is an ideal electrical refractory cement for coating resistors, coils, electric heating elements, furnaces, and embedding resistance wire. It replaces insulating varnish, enamel, mica, etc. The cement is also available in powder form known as Sauereisen Electric Resistor Cement No. P-78. When mixed with water to the proper consistency, No. P-78 has the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you