Only show results in Connecticut? Ok

Decanter Centrifuges Applications

  • Premium

    Vertical Cuttings Dryers for Waste Solids Management

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite recovery” system. As noted in that report, when centrifuges are properly used, centrifuges enhance the drilling fluid properties, thereby improving rig performance. By maintaining the target properties of the drilling fluid,...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Centrifuges for chemicals, biotechnology, pharmaceuticals and food industries

    In the areas of chemicals, pharmaceuticals and foodstuffs, there are numerous possible applications for Flottweg Tricanter, Sedicanter and Sorticanter machines as well as decanters, belt presses and separators: Manufacturing lactose and casein in the dairy industry, separating plastics - plastics recycling, algae harvest, manufacturing soya milk and soya proteins, drying okara, manufacturing wheat starch, dewatering PVC, dewatering suspension polymers.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    Separation solutions for oil & gas industry

    Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering systems.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Mixers, dryers, innovative solutions for chemical industry

    We offer excellent process engineering solutions for the chemical industry in the fields of mixing, drying, evaporating, reacting, and granulating. Our ultimate goal is the satisfaction of our customers and a collaborative long-term partnership. The most up-to-date machines are at your disposal at our technology center in Herrsching, where you can carry out series of tests. Following delivery of the equipment, we support you from installation to commissioning and trial operation and assist you with maintenance...

    By AVA GmbH u. Co. KG based in Herrsching, GERMANY.

  • Decanting centrifuges solutions for chemistry-process-Pharma industries

    Developments in the chemical industry are of enormous importance for the wellbeing of humanity and are generally closely linked to other fields, such as the processing and pharmaceutical industries. In this sector there are numerous processes for which Hiller decanters are ideally suited. Whether it`s the extraction of specific contents, classification, dewatering or the separation of different liquid mixtures. Processes in the chemical and pharmaceuticals industry must be safe and error-free, and must also run...

    By Hiller GmbH based in Vilsbiburg, GERMANY.

  • Decanter Centrifuges for Wastewater Treatment Applications

    Hiller high-performance decanter centrifuges provide world-class standards for a wide variety of municipal and industrial wastewater treatment applications including:

    By Hiller Separation and Process based in Lampasas, TEXAS (USA).

  • Decanter Centrifuges for Renewable Energies Applications

    Hiller machines provide world-class standards for of high-performance decanter centrifuges specially equipped for the separation requirements of the ethanol, biodiesel and other renewable energy industries.

    By Hiller Separation and Process based in Lampasas, TEXAS (USA).

  • Wastewater Treatment for Municipalities

    PBS Velká Bíteš develops and manufactures machines for the separation of solid and suspended particles from liquids. The so-called "Decanter Centrifuges" can be used for a wide range of applications: from separation of municipal and industrial sludge in waste water treatment plants, through food and chemical industries up to agriculture. In the area of separation, we offer not only the decanter centrifuges themselves, but also the related services, including servicing of third-party equipment.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

  • Centrifugation and Separation Technologies for Household and Industrial Waste Water Treatment

    Despite of tremendous development of modern technologies, water cannot be fully eliminated from industrial use that inevitably leads to its contamination. Water is widely used in different manufactures. The issues of industrial waste water cleaning, as well as disposal of sludge are becoming ever more important today.

    By WSEnergy based in Munich, GERMANY.

  • Sludge dewatering and integrated environmental solution for the industrial industry

    Oil and gas industry increasingly needs decanter centrifuge to recycle drilling mud and treat sludge. In the metallurgical industry, like acid pickling wastewater in steel works, grinding circulation fluid and secondary dissolution slurry in producing aluminum oxide, there are many solid-liquid separation links during the whole process from supply raw materials to completing finished products, and the separation efficiency at these links will directly or indirectly affect the operation cost of the whole process...

    By Green Environmental Co., Ltd. based in Xi’an, CHINA.

  • Decanter centrifuge & cuttings for drilling waste management & disposal

    Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Centrifugation and Separation Technologies for Oil Sludge and Drilling Mud Treatment

    Annual volume of oil pollution and oily wastes in the world is estimated as much as hundreds million cubic meters. As a rule, oily wastes that enter the water and soil come from following sources: oil exploitation and transportation, petroleum production at oil refinery plants and cleaning operations of oil tanks.

    By WSEnergy based in Munich, GERMANY.

  • Centrifugation and Separation Technologies for Soil Treatment (Flushing)

    This water jet cleaning technology for soil cleaning is applicable for removing any contaminants necessarily demanding vibration treatment and high pressure water flushing.

    By WSEnergy based in Munich, GERMANY.

  • Decanter centrifuge for drilling mud solids control

    Decanter centrifuge is used as the 4th phase solids control equipment after shaker, desander and desilter. The centrifuge suck the mud from the compartment receiving the discharge from the desilters and mud cleaners, and the returned stream is directed to the next compartment downstream. The use of decanter centrifuge with the drilling mud is (1) removal fine solids from unweighted fluids (2) selection separation of colloidal and ultra-fine solids from weighted fluids to improve their...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Decanter Centrifuges for Food and Beverage Processing Applications

    Hiller DecaFood machines provide world-class standards for high-performance decanter centrifuges and the modern range of Hiller DecaFood Decanter Centrifuges reflects our ongoing commitment to mechanical development and process optimization for a wide variety of food processing technologies. Applications such as fruit and vegetable juices, spice extraction, wine, grape must production or dregs processing are only some of the examples where the DecaFood system can be applied. As our customer you benefit demonstrably...

    By Hiller Separation and Process based in Lampasas, TEXAS (USA).

  • Folding Belt Filter Press for Metal Finishing Wastewater Treatment

    AUTOMOTIVE PARTS MANUFACTURE V-FOLD fed directly from “enhanced settler” on wastewater at a suspension manufacturer (V-FOLD replaced a “plate & frame press”)

    By V-Fold Inc. based in London, ONTARIO (CANADA).

  • Decanter Centrifuges for Sludge Dewatering Applications

    Diverse industrial applications for liquid/solid separation and sludge dewatering demand efficient and cost-effective solutions. Since its invention over 100 years ago the solid bowl centrifuge, also called a decanter, has established itself as conventional solution for this task across many sectors. The majority of these applications target the separation from the liquid and solid phase whereby, generally, the least possible residual moisture is required in the solid phase and the lowest possible solid particle...

    By Hiller Separation and Process based in Lampasas, TEXAS (USA).

  • Decanting centrifuges solutions for mining, tunneling & drilling fluids industries

    Mineral industry: Centrifuges are used all over the world to prepare mineral suspensions. Hiller decanters are ideally suited to hydrometallic processes, such the extraction of gold, silver or nickel. The processing of industrial minerals such as calcium carbonate, kaolin or titanium dioxide is also optimally carried out using Hiller technology. The dewatering and classification of mineral sludges is a complex issue, and requires special designs. Hiller high performance decanters have been developed and optimised...

    By Hiller GmbH based in Vilsbiburg, GERMANY.

  • Solid/liquid separation for food & beverages

    Everything from presses and centrifuges to filters, screens, and drying systems for food and beverage producers worldwide. The right ingredients for your success in the food industry: Want to get more from less? Purer products? Better taste? With more than 100 years’ experience in the food industry, serving everyone from multinationals to smaller family operations, we can promise you one thing: your goals come first.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

  • Solid/liquid separation for chemicals industry industry

    A comprehensive range of separation, drying, automation solutions for chemical and petrochemical processing applications. Solutions you can count on in the chemicals industry: Are you looking for innovative separation solutions? New ways to reduce operating costs? Or ensure easy maintenance, full automation, and the highest availability of spare and wear parts?.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you