Only show results in Massachusetts? Ok

Deionized Water Applications

  • Premium

    Hand-Held & process control water testing instrument for Deionized water testing industry

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water treatment chemicals solutions for chemical industry

    In the chemicals industry, filtrate water, pure water, and ultrapure water of varying quality are used, depending on the product. Kurita Water Industries provides a range of water demineralizers, such as filtration systems which use membranes and deionizers that combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers. Kurita Water Industries also offers a product lineup made up of wastewater treatment systems that treat organic and...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Advanced water purification technologies for semiconductor and electronics sector

    High-technology industries use ultrapure water in their manufacturing. SnowPure’s components help sell pure water systems to semiconductor, electronics, solar panel, hard disk drive, glass lens, and flat panel display industries. These industries often require “ppt” (part-per-trillion) level impurities. EDI and UV-TOC are key technologies in these systems.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Premium

    Advanced water purification technologies for power generation sector

    SnowPure provides EDI modules for power generation market, since 2002. Power plants around the globe utilize our Electropure electrodeionization (EDI) including plants in the United States, China, Europe, and the Middle East. With our high capacity EXL EDI product we are able to serve a greater share of the boiler feedwater high purity water market.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Premium

    Advanced water purification technologies for pharmaceutical, medical, & laboratory sector

    SnowPure has been providing EDI technology to the pharmaceutical and medical markets since 1997. We have installations in over 47 counties including the United States, Canada, South America, India, Europe, Japan, China and Southeast Asia.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Premium

    ADVANCEES custom skid-mounted water purification equipments for deionization

    Deionized water, also known as demineralized water (DI water or de-ionized water; can also be spelled deionised water), is water that has had its mineral ions removed, such as cations from sodium, calcium, iron, copper and anions such as chloride and bromide. Deionization is a physical process which uses specially-manufactured ion exchange resins which bind to and filter out the mineral salts from water. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that...

    By Advanced Equipment and Services based in Coconut Creek, FLORIDA (USA).

  • Premium

    Water treatment chemicals solutions for electronics industry

    In the electronics industry, pure water and ultrapure water with a very high degree of purity and functional water that dissolve gases into ultrapure water are used to clean silicon wafers and electronic components. Kurita Water Industries offers a range of products such as deionizers and ultrapure water deionizers that combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers , etc., as well as functional water production systems . Kurita...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals solutions for food industry

    In the food industry, filtrate water and pure water are mainly used in the different food manufacturing processes. Kurita Water Industries offers a range of products such as filtration systems that use membranes and deionizers that combine things such as RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers. Kurita Water Industries also offers a number of wastewater treatment systems, including biochemical treatment systems that treat organic...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals solutions for beverage industry

    In the beverage industry, large quantities of filtrate water and pure water are used to prepare and cool products as well as clean containers. Kurita Water Industries offers a range of products, such as filtration systems using membranes and deionizers, which combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers. Kurita Water Industries also offers a number of wastewater treatment systems, including biochemical treatment systems that...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Ultraviolet disinfection systems for the de-chlorination industry

    The purpose of de-chlorination is the removal of free chlorine and combined chlorine compounds from potable water, as supplied by municipal water supplies. Chlorine will oxidize the surface of thin film composite polyamide membranes, causing the membrane to lose its ability to repel or reject salts. As a result, the membranes used in Reverse Osmosis (RO) or Electro-deionisation (EDI) systems will exhibit shorter lifetimes when exposed to chlorine in the water they are treating and membrane manufacturers will...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Water treatment solutions for the chemicals & pharmaceuticals industry

    Water is a critical ingredient in chemical manufacturing operations; consistent and high-quality supplies are needed for a range of purposes including production, material processing, and cooling. Water treatment systems have to often comply to very stringent industry specific qualifications and certifications. A stable and guaranteed water supply is critical and duty stand-by solutions are frequently requested from end-users.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Water treatment solutions for the food, beverage & tobacco industry

    Food and beverage producers are constantly looking for production optimization while achieving the highest levels of quality and compliance. Lenntech provides sustainable complete solutions for ingredient, water and waste water treatment in food and beverage industry considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Water treatment solutions for the micro-electronics industry

    Micro-electronics industry is probably the fastest growing industry driven mainly by the expansion of the computer and telecommunications markets, as well as the growing automotive, military and industrial electronic markets. The production of smaller and smaller microelectronic components is contributing for a great pressure for the purification of process waters, given the extreme high quality water demanded by the manufacturers Lenntech provides complete solutions for ultra pure water production for semi-conduct...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Online Monitoring for the Demi-Water Production Industry

    Demineralization is the process of removing mineral salts as well as organic impurities from water by means of ion-exchange and can be found in various industries such as the chemical, food & beverage, irrigation and filtration industries. The consuming side of the industry relies on ever increasing quality and availability of demi-water while the manufacturers have to balance cost/output. AppliTek provides high quality analytical tools to increase process efficiency and quality control. Continuous measurements...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Flame Photometer for Measurement of Calcium in Biological Samples

    A number of methods have been reported for the measurement of calcium in biological materials by flame photometry or titration. This method employs trichloroacetic acid (TCA) to precipitate the proteins and has been found to be adequate to extract all of the calcium from tissue samples. Sodium, potassium and phosphate caused no significant interference and calcium concentration in the range of 0 to 2 µg/ml is readily determined.

    By BWB Technologies based in Newbury, UNITED KINGDOM.

  • Flame Photometer for Recommended Sample Handling Techniques & Considerations

    Thoroughly clean and rinse all glassware with the supplied BWB Technologies deionised distilled water to ensure that it is clean and free of extractable sodium and potassium. Glassware should be acid cleaned and rinsed thoroughly in deionised double distilled water prior to use to avoid contamination from extractable metals under test.

    By BWB Technologies based in Newbury, UNITED KINGDOM.

  • Flame Photometer for Measurement of Lithium in Saliva

    The use of lithium carbonate for the treatment of bipolar disorders and depression is well established. However, for the treatment to be effective, it must be managed closely, to ensure the dose is maintained within the normal therapeutic range.

    By BWB Technologies based in Newbury, UNITED KINGDOM.

  • Flame Photometer for Measurement of Calcium in DNA and DNP

    The calcium content of aqueous solutions of deoxyribonucleic acid (DNA) and deoxyribonucleoprotein (DNP) can not assayed directly because of interference effects. An acid extraction procedure will enable direct measurements of calcium in DNA and DNP, or a standard addition technique is used at higher concentrations.

    By BWB Technologies based in Newbury, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you