Only show results available in Virginia? Ok

Effluent Treatment Applications

  • Premium

    Peristaltic pumps and fluid path technologies for food and beverage

    Watson-Marlow understands the challenges faced by food and beverage manufacturers. Your reputation and brand rely on product integrity and consistency.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.

  • Premium

    Effluent cleaning for wastewaters

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA).

  • Premium

    Anaerobic water purification systems for nutrient removal and recovery

    Companies and municipalities have to remove nutrients from their effluents - such as nitrogen and phosphate - before they can reuse the water. There are also strict discharge limits on the nutrients levels that must be met. Paques has a number of technologies that can deal with these requirements.

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Waste Water

    Waste water, especially industrial waste water, is the most challenging water for instrumentation. Mostly, this water is characterized by highly fluctuating loads, very high salt concentrations as well as a high particle density. Hence, the accurancy and speed of measurements depends on the measurement system itself and the oxidation technique used. Obviously, application-specific analyzers provide huge advantages against standard analyzers that are used for all applications.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Industrial and commercial water filtration for effluent water treatment

    Through experience we have found that when the correct water filtration system is put into place as an integral part of the effluent water treatment process our customers have been able to experience several benefits:- Enabled water to be re-used in other areas of their operations as part of the effluent treatment process.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Differential level transmitter for VFD pump control & flow measurement

    An Ontario municipality deploys Portable flowmeters to solve flow rate discrepancies between sewage pump station effluent and lagoon influent flowmeters. Faced with suspension of construction permits due to flow rate uncertainty, the Township of North Glengarry called on Greyline Instruments to help troubleshoot two permanently installed flow meters.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • High-calcium lime slurry for mining industry

    Multiple applications, from acid neutralization of mine waste and process control for mineral separation, to off gas desulphurization, lime is often considered the “life blood” of the mining industry.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Effluent filtration in textile industry

    To separate solids from liquids, nonwoven or woven fabrics out of animal or vegetable fibers are used, and synthetic fibers are now in use since several decades. In cross-flow filtration the filtrate is recuperated transversely to flow direction through a porous wall layer. In classic filtration, a filter cake is built up on filter surface and this cake reduce the flow of filtrate which will depend of the cake permeability. Often it needs such a cake structure build-up in order to obtain a clear filtrate. The filtration of slimy products such as proteins, polymeric carbohydrates or microorganisms was with the classical methods of filtration is quite costly or even impossible.

    The characteristic feature of the cross-flow filtration is the high flow velocity over the filter surface, which avoid the build-up of a cake.

    Cross flow filtration may be sufficient to achieve a filtration efficiency for separation of fine inorganic particles of a few micrometers in a low viscosity solvent.

    By Bucher Unipektin AG based in Niederweningen, SWITZERLAND.

  • Decanter centrifuge & cuttings for drilling waste management & disposal

    Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud circulation system. GN offer a complete package of drilling waste management tank system as well.

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you