Only show results in Virginia? Ok

Metal Water Treatment Applications

  • Premium

    Evaporators and concentrators for galvanic

    Treatment of washing water of galvanized materials and water and metals recovery.

    By Eco-Techno s.r.l Vacuum Evaporation System based in Busnago MB, ITALY.

  • Premium

    Water treatment chemicals for the steel and coke industry

    The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for waste water remain unchanged, resulting in an increased demand for professional water treatment.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Nighttime Supply Flow Measurement for drinking water industry

    Application: Pipe with 0.1 m diameter. Full filled. Made of stainless steel. Low water volumes of approx. 3 l/s.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Industrial wastewater solutions for stainless steel pickling wastewater

    VACUDEST vacuum distillation systems. Premium technologies for stainless steel pickling. through stainless steel surface pickling processes, protecting the stainless steel from corrosion. This generates rinse water whose toxic contents make it impossible to discharge. It must either be treated or disposed of at high cost.

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Wastewater treatment for the metallurgical industry

    With the presence of metals and, sometimes, organic compounds that are not very biodegradable.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

  • Water treatment

    As a selective oxidizing agent, chlorine dioxide possesses several chemical advantages when compared to the traditional use of chlorine in wastewater treatment. Chlorine dioxide does not hydrolyze in water, and thus it retains its biocidal activity over a broader range of pH. It is also non reactive with ammonia and most nitrogen-containing compounds, and thus effective at lower dose levels than chlorine. It also eliminates phenols, simple cyanides and sulfides by oxidation. Likewise it is effective at odor control and will oxidize sulfides. Chlorine dioxide is also effective at oxidizing iron and manganese compounds.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Wastewater treatment for the metallurgic industry

    Waste water in this sector has a high concentration of heavy metals, oils and products in decomposition. The oils and emulgents lead to foam production at the water treatment plants. The treatment of these oils is very important.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Industrial Engineered Plastic for the Wastewater Industry

    Over the past decade, Diversified Plastics has become a leading provider of sprockets and other plastic components to the wastewater industry. This is, in part, because many treatment facilities are moving away from metal and toward plastic components.

    • Plastic components are much lighter than steel, reducing shipping costs and making them far easier and less labor-intensive to install.
    • Plastic components are as or more durable than steel and reduce friction, which lengthens the life of the mating components and also lowers energy consumption.
    • Plastic components not only cost less to purchase upfront, they reduce long-term maintenance costs.

    By Diversified Plastics, Inc. based in Missoula, MONTANA (USA).

  • Industrial Meshes for Fluidization

    Pneumatic conveyors lines for conveying media in powder form are equipped with fluidization media made of GEKUPLATE wire mesh laminates. SolidWEAVE stainless steel media satisfy all the requirements which are critical for fluidization.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Produced water treatment for oil and gas industry

    Recycling, reusing or treating produced water does not always have to be expensive.  Most Oil & Gas companies manage more water than they do hydrocarbons.  While MIOX is not a 100% solution to all produced water treatment needs, it does do the heavy lifting.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Industrial wastewater treatment systems for metal industry

    Removal of heavy metals (chrome, cadmium, zinc) suspended solids, oils and grease from aircraft stripping, painting and maintenance operations.

    By Ecolotron, Inc. based in E. Dickinson, TEXAS (USA).

  • Process water treatment for the electroplating and galvanizing industry

    Treatment solutions for water and effluent from electroplating and galvanizing industry. Treatments of rinsing water and effluents obtained from surface treatments of: metals, special alloys, and plastic. SAITA provides plants and solutions such as: Zero discharge plant, recycling of rinsing waters, polluted baths’ filtration, chemical-physical treatment plants, demineralization and reverse osmosis plants and evaporators.

    Treatments

    Chromating // Nickel-plating // Galvanizing // Electroless nickel // Aluminium anodizing // Phosphating // PVD // Wet vibrofinishing // Fashion accessories // Plastic metallization // Printed circuits PCB.

    By SAITA srl based in Limena (PD), ITALY.

  • Solutions for industrial wastewater treatment sector

    Our industrial wastewater treatment services are used by companies in a variety of industries, and our reputation as a go-to company for wastewater treatment continues to grow. We offer affordable and efficient water filtration services, and as a manufacturer and wastewater equipment supplier of water purification equipment we’ll provide the options that work best for iron and manganese removal, arsenic removal and all your individual needs. Industrial, manufacturing, mining, semi conductor and petroleum companies represent just a few of the industries we help, and our clients include those who need city/municipal water treatment as well.

    By Filtronics, Incorporated based in Anaheim, CALIFORNIA (USA).

  • Industrial water treatment products for primary metals

    Water treatment programs within the metal processing industries are integral to the successful manufacturing of quality products. Our water management programs incorporate a complete and in-depth understanding of the mechanical operation of each system being treated.

    By ChemTreat, Inc. - a subsidiary of Danaher Corporation based in Glen Allen, VIRGINIA (USA).

  • Wastewater Treatment & Filtration

    4. Metallurgy: Lead Pb, copper Cu, zinc Zn, tin Sn, manganese Mn, nickel Ni refinement Refinement of various non-ferrous metals Precious metal refinement (Ag, Au, Pt, Pd) Liquid electroplating waste "Washer water" from blast furnaces

  • Hydrocyclones for quench water treatment

    Cost Effective Protection with Krebs Hydrocyclones for Quench Water Treatment. High Efficiency products to remove mill scale in steel plants and metal forming applications.

    By FLSmidth KREBS based in Tucson, ARIZONA (USA).

  • Disposal wells treatment for oil and gas industry

    Treating the water being injected for disposal is not always considered by operators. This is likely costing you money in the long run. Removing iron, heavy metals, and treating out ammonia is a benefit to treating with MIOX’s mixed oxidant solution. While these are benefits of the technology, the most important is the elimination of bacteria which can cause Hydrogen Sulfide (H2S), corrosion pitting, poor injectivity and other problems, resulting in great well workover frequency. Treating injection wells does not need to be expensive, and can be treated as you inject.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you