Only show results available in Virginia? Ok

Pipe Bursting equipment for Water and Wastewater

  • PowerTeam - Model 1.25 - Hydraulic Pump

    At Your Service…If you want to test the durability of a product, rent it to a plumber. Louise is a star performer in the TRIC rental fleet, and has rescued a good many local pipebursting jobs. Ultra-compact and reliable, this model is best matched with our small pullers. Just plug it in and get to work!

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Hydraulic Pump Product line

  • Model 6 Inch - Standard Head Pulls

    The 6-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a 3/4” cable with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Standard Head Pulls Product line

  • Model 8 Inch - Standard Head Pulls

    The 8-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a swaged cable (7/8”, 1”, 1.125”, or 1.25”) with a 2” x 4.5 TPI stud termination. The PE driver is also the head driver. The new standard 8-inch mole has a narrow 3-inch diameter nose,  and ...

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Standard Head Pulls Product line

  • TRIC - Model 4 Inch - Lock Head Attaches

    The 4-inch TRIC-Lock head attaches directly to an open end of 4-inch SDR17 pipe, and requires no PE cap or fusion to the new HDPE pipe. The head assembly is pulled by a 3/4” cable (optional 5/8” cable) with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Lock Head Attaches Product line

  • Model 14M - Butt Fusion System

    The Connectra 14M Butt Fusion System is designed for quick and accurate joining of 3/4” CTS through 4” DIPS polyethylene pipe and valves and fittings, including 25-110mm, using the butt fusion process. Easy-to-use snap-in liners reduce the clamps to the smaller pipe sizes. The joining assembly, heater and facer can be used in the ...

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Butt Fusion System Product line

  • Model MNB-125 - Heavy-Duty Unit for Installation and Replacement of Large Pipes

    Hydraulic trenchless piercing unit with full steering capability and a pulling force of 125 tons. MNB-125 is capable of installing pipes as large as 500 mm in diameter at the distances of up to 150 m. MNB-125 is also used for trenchless replacement of old pipelines up to 600 mm in diameter by means of static pipe bursting.

    By Mempex Ltd based in Minsk, BELARUS.

  • HydroGuide - Model HG12 - Auto Boom Winch

    Hammerhead HydroGuide HG12 winch is designed to maximize efficiency and minimize setup time and effort for pipe bursting, slip lining, pipe pulling, cable pulling and swage lining projects. Setup and tear-down can be performed in minutes, not hours. Once setup is complete the HG12 offers 12 tons (11 tonnes) of pulling power for a wide range of ...

    By HammerHead Trenchless Equipment based in Lake Mills, WISCONSIN (USA). from Auto Boom Winch Product line

  • Tric - Model V24 - Hydraulic Pulling Pump Units

    The V24 is a stripped-down version of the original TRIC system that started the industry of sewer lateral pipe-bursting back in 1997. Simple, fast, and economical, the V24 pulls directly in-line with the pipe, eliminating the pulley wheel found in the standard TRIC configuration. Geared for higher flow and lower pressure, the unit can run as an ...

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Hydraulic Pulling Pump Units Product line

  • GRUNDORAM - Pneumatically Driven Pipe Ramming Machines

    GRUNDORAM pneumatically driven pipe ramming machines are used for the dynamic installation of steel pipes underneath roads, waterways, railway tracks, parks, etc. over lengths of up to 80 m. The TT ramming technology provides thrust forces up to 40.000 Nm, enabling the economic installation of open end steel pipes up to 4000 mm diameter in soil ...

    By Tracto-Technik GmbH & Co. KG based in Lennestadt, GERMANY.

  • Bursting Heads

    Our articulating bursting heads, with a magnetically activated quick locking cable system, are years ahead of the competition. No tools are required to release the cable or pipe from the bursting head.

    By Roddie Inc. based in Columbia Falls, MONTANA (USA). from Bursting Heads Product line

  • Fusion Welding Machine

    This compact fusion welding machine is lightweight at only 34 lbs, the entire fusion machine and accessories can easily be stored and transported to and from the job site in the provided rolling toolbox. This machine uses an included Makita powered facing tool.

    By Roddie Inc. based in Columbia Falls, MONTANA (USA). from Fusion Welding Machine Product line

  • Grundoram - Pneumatic Pipe Ramming

    Whatever direction your work takes you, Grundoram can handle it . . . from conventional horizontal pipe ramming to vertical pile driving. The Grundoram pneumatic ramming tool is used for the trenchless installation of steel pipe through a wide variety of soil types, without any rise or fall in the ground’s surface. Some casing installation ...

    By TT Technologies, Inc based in Aurora, ILLINOIS (USA).

  • TRIC - Model Hi-Flow 36 - Hydraulic Pump

    The Hi-Flow 36 is engineered for municipal work, where speed is a premium. This pump is the perfect match for our heavy-duty M-series pipe bursting systems. While the TRIC M-series pullers can be driven off a back hoe’s auxiliary ports,* the Hi-Flow 36 will push our big machines to their full capacity. This is the contractor’s choice ...

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Hydraulic Pump Product line

  • Model 4 Inch - Standard Head Pulls

    The 4-inch standard head pulls a PE cap or pipe-end, which is fused onto the new HDPE pipe. The head assembly is pulled by a 3/4” cable (optional 5/8” cable) with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Standard Head Pulls Product line

  • TRIC - Model 6 Inch TL - Lock Head Attaches

    The 6-inch TRIC-Lock head attaches directly to an open end of 6-inch SDR17 pipe, and requires no PE cap or fusion to the new HDPE pipe. The head assembly is pulled by a 3/4” cable with an open shackle termination. The pulling eye of the head assembly hinges on the shackle-pin, facilitating tight entry situations.

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Lock Head Attaches Product line

  • Model 28 CQ - Butt Fusion Machine

    Connectra’s 28CQ is built for tight spaces. In the ditch, on the piperack, wherever room is at a premium, the 28CQ is ideal. Its straight forward design makes training quick and operation easy, reducing maintenance costs and downtime. And with its quiet and durable facer motor the 28CQ can handle any job.

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Butt Fusion Machine Product line

  • McElroy PitBull - Model 26 - Fusion Machine

    The McElroy PitBull 26 model fusion machines are designed to butt fuse polyethylene pipe as well as tees, ells and other fittings. If fusing other thermoplastic pipe materials, refer to the pipe manufacturer’s fusion procedures or appropriate joining standard. The PitBull 26 fuses 2” IPS through 6” DIPS (63mm through 180mm).

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Fusion Machine Product line

  • Model UNB-20 - Directional Drilling Machine

    A lightweight & portable hydraulic underground piercing unit. UNB-20 has a full steering capability thanks to radiolocation navigation system. UNB-20 is a multifunctional unit designed for drilling in areas with limited accessibility and in confined urban spaces. The works are accomplished in two steps: 1) drilling a pilot bore with ...

    By Mempex Ltd based in Minsk, BELARUS.

  • Heatsock - Self-Regulating Nipple Heater

    HEATSOCK is made of tough, durable thermoplastic and a long life heating element. Self regulating heating cable supplies just enough power to prevent water from freezing.

    By Greenhill Manufacturing based in Greendale, WISCONSIN (USA).

  • Permalok - Steel Casing Pipe

    The most effective innovations are often the most simple in design. Permalok is a proprietary steel casing pipe joining system that employs a press-fit interlocking connection system for joining casing pipe sections in the field, faster than any other system.

    By Northwest Pipe Company based in Vancouver, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you