Only show results available in Virginia? Ok

Pipe Bursting services for Water and Wastewater

  • Pipe Ramming/Pipe Extraction

    Clean Harbors Pipe Ramming / Pipe Extraction Services utilizes pneumatic powered tools to drive a steel pipe horizontally into the ground. The front end of the pipe is left open, allowing soil to enter the pipe. After installation is completed, the soil is removed by doubling up the casing or auguring out. Hammers are available in 12, 16, and 20 ...

    By Clean Harbors based in Norwell, MA, MASSACHUSETTS (USA). from Pipe Ramming/Pipe Extraction Service line

  • Static Pipe Bursting with NO-DIG Pipe

    Advance Quicklock® bursting rods through the existing pipe with the hydraulically operated Grundoburst® until the rods reach the launching pit. A flexible guide rod in front helps navigate the existing line. Upon entry at the launch pit, the guide rod is removed and a bursting head, an expander and new NO-DIG vitrified clay jacking pipe ...

    By The Logan Clay Products Company based in Logan, OHIO (USA).

  • Auger Boring

    Land & Marine owns and operates auger bore rigs up to 1500mm in diameter with jacking forces from 100t to 530t and, from a shaft as small as 2.4m in diameter, we can install pipeline crossing lengths up to 100m and using laser guided equipment up to 80m.

    By Land & Marine Project Engineering Limited based in Wirral, UNITED KINGDOM.

  • Utility Construction

    J. Fletcher Creamer & Son, Inc. has been a leader in Utility Construction for almost a half a century. We are well versed and highly skilled in both wet and dry utilities. We maintain qualifications and certifications to perform both types of work. Our experienced teams working with our specialized equipment can expertly handle any project ...

    By J. Fletcher Creamer & Son, Inc. based in Hackensack, NEW JERSEY (USA).

  • Pipe Bursting Services

    Our Pipeline Contractor Services Include Pipebursting. Pipebursting is a trenchless method of replacing existing underground pipelines, such as the water, sewer, or natural gas pipes. This method can be used when the original pipeline burst while new pipe is being simultaneously pulled into place.

    By Southeast Pipe Survey, Inc. (SPS) based in Patterson, GEORGIA (US) (USA). from Pipe Bursting Services Service line

  • PIM Pipe Bursting - Non-Ductile Pipelines Services

    Cities all across North America are using Pipebursting to maintain or improve their pipeline systems. Since the Pipebursting process was developed, over 7,500 miles of pipe - both mainlines and service laterals - have been replaced worldwide using this technology. Significant Cost Savings: Without doubt, Pipebursting is one of the most economical ...

    By PIM Corporation based in Piscataway, NEW JERSEY (USA).

  • Wall thickness measurements

    Timely wall thickness measurement and adequate follow- up of maintenance or replacement can prevent a sudden pipe burst and its resulting production disruption with important financial and environmental consequences.

    By The Sniffers based in Balen, BELGIUM. from Wall thickness measurements Service line

  • Pipe Cracking Services

    Pipe cracking is a technique used to fracture an existing pipeline from the inside using a pipe cracking head. During this process the mechanical device pushes the broken pipe remains into the surrounding ground while at the same time draws a new pipe of the same or larger diameter in place behind the cracking device. Pipe cracking is also ...

    By Trenchless Technologies based in Berea, SOUTH AFRICA.

  • Water Damage/Structural Drying Services

    I.C.E.R is on standby 24 hours a day, 7 days a week to respond to your water damage needs with a fully equipped team of Restoration Professionals. Whether you’ve had a pipe burst, a flooded basement, or just don’t know where the water is coming from, we are experienced, certified and utilize the latest innovative techniques to locate the source, ...

  • Pipe Bursting Services

    Pipe Bursting is an extremely cost effective solution for infrastructure rehabilitation. The pipe bursting process is a trenchless method of replacing or upsizing failing, outdated or undersized infrastructure. Ellingson Trenchless understands that the use of fusible pipe material for your new infrastructure will help you eliminate infiltration, ...

    By Ellingson Companies based in West Concord, MINNESOTA (USA). from Pipe Bursting Services Service line

  • Pipe Ramming Services

    Pipe Ramming is a process where steel pipe is installed with a pneumatic hammer. Grade can be set and controlled from the launch pit and distances of up to 150 feet can be achieved. This process allows installation as an alternative to the traditional jack and boring installation. As the steel line is installed, the soil is forced into the ...

    By Ellingson Companies based in West Concord, MINNESOTA (USA). from Pipe Ramming Services Service line

  • Pipe Ramming Services

    Pipe ramming is a simple technique utilising a pneumatic hammer to drive steel casings through the ground from one pit to another. Rams of pipes up to and over 2m diameter and exceeding 70m in length have been achieved. During the basic operation, the correct size of rammer is positioned on the tracing or 'H' Beam in the launch pit, the rammer and ...

    By Trenchless Technologies based in Berea, SOUTH AFRICA.

  • Pipe Bursting

    As part of the pipe bursting procedure (also referred to as 'burstlining'), the old pipe is destroyed, the broken fragments are pressed into the surrounding earth and the new pipe is fed into the resulting channel. Old pipes comprising vitrified clay, concrete, cast iron, steel or fibre cement can be rehabilitated using this procedure. The ...

    By Ludwig Pfeiffer Hoch- und Tiefbau GmbH & Co.KG based in Leipzig, GERMANY. from Pipe Bursting Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you