Only show results in Virginia? Ok

Point-Of-Use (POU) Applications

  • Premium

    Marine image profiling using our unique SuperSting Marine system

    Marine image profiling using our unique SuperSting Marine system.

    By Advanced Geosciences, Inc. based in Austin, TEXAS (USA).

  • Premium

    Chemical filtration in lacquers for the recycling industry

    In the field of waste water treatment atech membranes are used, for example, for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Customized Solutions for surface water treatment industry

    WesTech offers a holistic approach to surface water treatment for potable use. Depending upon the raw water quality, the flow rate, and operational preferences, WesTech can provide conventional flow, combination treatment units, packaged systems, high-rate processes, or even customized solutions.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Treatment of Process Water within Industry

    Water is used for a wide variety of purposes in industrial production. Water has to be treated, so that sufficient amounts are available in the quality required for production. Process water must generally be re-treated after it has been used, so that it can either be discharged according to regulations or returned to the water cycle.

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY.

  • Premium

    Water treatment for the pulp and paper industry

    Pulp and paper processes use a large amount of water that must be treated for production and reclaimation purposes. Effectively treating water from these processes ensures the disinfection of microorganisms that would otherwise breed in the environment and affect product quality and quantity.

  • Premium

    Customized Solutions for groundwater treatment industry

    WesTech offers a wide variety of solutions for groundwater treatment for potable use. Whether your treatment objective is gas removal, iron & manganese removal, color removal, softening or even filtering a source under the direct influence of surface water, WesTech has your solution.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Advanced water treatment equipments for deionization

    Deionized water, also known as demineralized water (DI water or de-ionized water; can also be spelled deionised water), is water that has had its mineral ions removed, such as cations from sodium, calcium, iron, copper and anions such as chloride and bromide. Deionization is a physical process which uses specially-manufactured ion exchange resins which bind to and filter out the mineral salts from water. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that is generally similar to distilled water, and this process is quick and without scale buildup. However, deionization does not significantly remove uncharged organic molecules, viruses or bacteria, except by incidental trapping in the resin. Specially made strong base anion resins can remove Gram-negative bacteria. Deionization can be done continuously and inexpensively using electrodeionization.

    By ADVANCED Equipment and Services based in Hollywood, FLORIDA (USA).

  • Premium

    Sustainable Plant Solutions for the Recycling of Water and Resources

    Water is one of the most important raw materials for industrial production. For this reason, processes are now used in water treatment that not only produce the required water quality, but also allow for recycling. The treated water can either be fed back into the process, or reused for other purposes. Water recycling plants lead to a significant reduction in operational costs for production.

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY.

  • Premium

    Water Treatment solutions for removal of micro-pollution

    Using powder activated carbon to effectively adsorb man-made trace substances. ProMinent also provides cost-effective solutions for challenging jobs in municipal waste water treatment: micro-pollutants are effectively removed by a complete system for accurately metering powder active carbon.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Water treatment solutions for utility water treatment

    It makes economic sense to reuse process water. Why would you discharge water just because you`ve used it once? If this water is treated properly, it can be reused with ease, cutting costs in no time.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Particle Filtration for the Biotechnology / Chemical Industry

    In chemical and biotechnological applications, we use our ceramic membranes successfully for protein concentration, cell separation, recovery of catalysts, filtration of dyestuffs, and more.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Determination of hesperidin and naringin in juices using CAPEL-105M capillary electrophoresis system

    The method is intended for determination of hesperidin and naringin using capillary electrophoresis technique in order to reveal adulteration of juices. These components are tested in citrus juices, concentrated juices, nectars, juice-containing beverages, and fruit sauces that are produced primarily from oranges, grapefruits, tangerines, lemons, and limes. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used source of water to produce process water.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Crushing of salts with Mercodor crushing systems

    The crushing of salts such as, for example, hardness salts, salt dispensers, but also rock salt, is a great challenge for the crushing machine from various points of view. On the one hand, the salts are very hard, but already in the presence of a very small amount of a liquid they dissolve and mix with the liquid. The Mercodor crushers are best suitable for crushing of salts of any kind such as, for example, crushing of rock salts, but also for crushing of salt dispensers and hardness salts.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Crushing of batteries with Mercodor crushing systems

    In the crushing of batteries, a particular attention is necessary, which in turn is a challenge for the used crushing machines. However, in the course of raw materials recycling, the crushing of batteries is an important step and serves at the same time for protection of the environment.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Ultra pure water treatment

    Ultra pure water is mainly used in the semi conductor and pharmaceutical industry. Because of the continuing miniaturilisation in the semi conductor industry, the specifications become more strict every year. Ultra-pure water contains by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,054 uS/cm at 25oC, also expressed as resistivity of 18,3 MOhm.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Water Treatment for Drinking Water

    There are many different drinking water applications that are appropriate for AdEdge Technologies’ solutions. Small community water providers, both private and public, have found the AdEdge modular or packaged units to be the correct answer to a variety of contaminant issues. Our systems also provide safe drinking water for dairy farms and other agricultural applications.  Individual residences use POU (point-of-use) and POE (point-of-entry) systems to ensure the quality of their water.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Wastewater testing for the water treatment industry

    There are strict regulations in place surrounding waste water, which makes it very important to monitor. Even small changes in aquatic ecosystems can have a huge impact in the chemical makeup of water, temperature, etc. By using real time monitoring on water quality, pollutants can be detected and mitigated before they pose a potential threat to these ecosystems and enter the water course. The rugged AP-2000 allows for real time testing of wastewater and helps to minimise risk of any potential fines. It is works to protect the device and allow for other essential parameters to be tested. Because it is portable, it is easy to transport between locations, and you can also save money from onsite visits by getting instant data readouts using telemetry.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Premium

    Pipes and Storage Systems for Chemical Industries

    GCER - Teammate Chemical Industries; Experiences and projects with the chemical industries in Tunisia and abroad have enabled us to offer our customers a wide range of products and solutions related to the chemical liquid container for the development of this industry. We have developed a solid experience in the design and manufacture of pipes and storage systems designed to convey aggressive and corrosive chemical fluids and it is precisely at this level that distinguishes the characteristics of GCER applications.

    By GCER based in Ksibet, TUNISIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you