Only show results available in Virginia? Ok

Pressure Cleaning Applications

  • Vacuum excavation solutions for animal waste / bedding clean-up / dairy farm / zoo / horse stall clean-up and maintenance

    Vac‐Tron Equipment can be used for various clean‐ups involving animal waste and bedding. Large animal environments are cleaned‐up in zoos; animal waste drainage pits, pumping contaminated water out of holding tanks and transferring into disposal tanks, draining and cleaning animal housing ponds, horse stalls for daily maintenance to suck-up urine and solid waste; complete cleaning of bedding area of straw or wood shavings; removes urine that is not good for the horses to smell (like acid or methane gas). Dairy farms implement the same process thereby yielding a cleaner more sanitized living condition for their cows. By utilizing the high pressure water wand to clean ponds, stalls, cages, concrete, landscaping, etc., and removing all animal waste to ensure the health of all animals.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Vacuum excavation solutions for locate underground utilities / soft dig / pot holing

    Vacuum excavation is fast becoming a best practice in the field of construction and site excavation. Why? Because it uses jets of air (air excavation) or water (hydro excavation) to loosen soil, instead of a heavy metal claw. After loosening, the soil is pulled out of the ground through an air vacuum hose to a debris tank for later disposal or back-filling. Using non-destructive technology can quickly, safely and economically excavate in areas inaccessible to conventional digging equipment like backhoes and trenchers.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Solutions for the equipment decontamination

    BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment.  Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Environmental technology for chilling - crystallisation industry

    For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in operation.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Paint shop cleaning

    Problem: Build-up on grates, skids, hooks, and carriers reduces paint shop efficiency and often leads to a below-quality finish. Chemical stripping and incineration are effective, but are hard on operating personnel and expose them to hazards.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Diverse Surface Treatment Technologies for Military Industry

    We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic equipment to prepare for and return from missions.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Premium

    Applications and Air Pollutants Removed in the Pulp and Paper Industry

    Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC gas streams. Complete fugitive lime dust collection systems to handle emissions from conveyors, elevators and feeders. Smelt dissolving tank particulate and TRS gases. Direct contact waste heat recovery. Black liquor evaporation. Treatment and subcooling of boiler and kiln gases to remove particulate, sulfur dioxide and TRS for precipitated calcium carbonate production (PCC). Dust from tissue and paper rollers and dryers. NASH and sodium hypochlorite scrubbing. Waste heat recovery with direct contact heat exchangers.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Environmental technology for edible oil industry

    In practically all important process stages for the production of edible oils, Körting steam jet vacuum pumps and vacuum systems are traditionally a guarantee for an energy - efficient and reliable vacuum creation. To meet today`s increasing demands for energy savings and environmental protection Körting now supplies different specially developed systems with closed water circuits, cold-water systems as well as ice (dry)-condensation vacuum systems.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Hydrodemolition

    Problem: The impact of concrete breakers and jackhammers is not limited to deteriorated concrete. It can damage rebar and produce vibration that generates microfractures in sound concrete. Not to mention the noise and the dust.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Vacuum excavation solutions for lateral clean out – Jettings

    Vac-Tron Industrial Vacuum Equipment makes manhole clean out easy and efficient for municipal public works departments. Our Mini Combo Series can clean out a manhole in seconds, allowing a reduction in man-hours for this type of job, helping reduce overhead and accomplishing more for the taxpayer’s money.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Pipe & tube cleaning

    Problem: As liquid product hardens, it builds up in a tube or pipe and restricts flow and efficiency. Removing it with drills or brushes can be hard, slow work, resulting in too much downtime.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Deburring & deflashing

    Problem: A burr left on a metal part – or flash on a molded one – not only sends a message of poor quality, it can cause serious problems down the road.  If it breaks off later inside a fuel injector or other critical part, it can cause clogs or damage that can affect performance.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Water tower retrofit for repair/replacement

    Cities, Towns, Sub Divisions, Mobile Home Courts, High Rise Buildings, and many others can use the Cycle Stop Valve (CSV) to turn any Submersible, Turbine, or Centrifugal pump into a variable flow, constant pressure system. The CSV maintains a constant pressure on the water system throughout a wide range of flow. Eliminating line breaks and leaks, while precisely providing any amount of water required, the CSV can conserve water as well as energy.

    By Cycle Stop Valves, Inc. based in Lubbock, TEXAS (USA).

  • Premium

    Chemical resistant dosing pumps for pharmaceuticals & laboratory industry

    Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from being manually operated to versatile units with sophisticated dosing programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids..

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Tank & tote cleaning

    Problem: Manual cleaning of tanks and totes used to ship and store plastics and chemicals can take many hours. It also requires people to work in confined spaces, which is discouraged by today’s safety regulations.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Surface preparation

    Problem: Removing rust, scale and coatings with grit blasting requires containment and/or clean-up, and those costs can have a significant impact on profitability. For contractors doing environmental remediation – removing asbestos or lead paint, for example – the containment issue is even more critical.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Combination water jet cleaning / sewer cleaning

    We have numerous requests each year for high-pressure sewer cleaning machines. We are in the unique position to be able to offer “combination” water blast/sewer cleaning units that provide more versatility than a standard 2,000 psi or 3,000 psi (140 to 206 bar) sewer cleaner.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Environmental technology for shipbuilding industry

    In shipbuilding Körting water jet ejectors do all critical pumping jobs on board a ship: bilging inaccessible tank and ballast spaces. conveying solids on long dredger suction heads. essential component in fresh water production plants on sea.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Tube bundle cleaning

    Problem: Heat exchanger systems lose efficiency when deposits build up in, and on, tube bundles. High-pressure water jetting cleans both I.D. and O.D. very effectively, but manual methods clean a limited area at a time and expose operators to strain and risk.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Vacuum excavation solutions for car wash pit clean out

    The Vac‐Tron trailer mounted vacuum system is the perfect tool for cleaning out car wash pits. By utilizing the vacuum portion of the system you can remove the oil, grease, chemical slick and garbage debris from the washout pits. Once all the debris is removed, you can utilize the high pressure water wand that offers 4 GPM at 4,000 psi to clean out the structure (i.e., walls, floor of the pits, grate overhead) leaving it clean and free of any build‐up. The Mini‐Combo Model is equipped with a jetter system which offers 15 GPM at 2200 psi. Use of this efficient tool will enable you to clean out the 4” lines that connect the washout pits so as to ensure proper drainage of contaminated water to the holding tank, if applicable.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you