Only show results available in Virginia? Ok

Sand Filtration Applications

  • Premium

    Municipal wastewater solutions for tertiary treatment industry

    From continuous backwash sand filters to ultrafiltration membranes, WesTech will help you achieve reuse-quality effluent. Offering more than one type of treatment allows WesTech to provide the right design for your specific application.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Filtration solutions for wastewater treatment industry

    Filtralite is suitable for use in different effluent water treatment processes, both for municipal and industrial effluents, such as: Biological treatment, Tertiary filtration, Odour treatment.

    By Filtralite - Leca Norge As based in Alnabru, NORWAY.

  • Premium

    Filter presses for mining, metallurgical, chemical & pharmaceutical sector

    Mining sector is: beneficiation of metals (iron, nickel, copper, zinc), beneficiation of non-metals beneficiation of noble metals (gold, silver, platinum, palladium), coal processing, calcium carbonate and minerals in general (silicates, clays, kaolins, etc..)

    By Albin Pump SAS based in Montelimar, FRANCE.

  • Activated carbons for water purification - Water and Wastewater - Drinking Water

    Carbon Activated is one of the major suppliers of activated carbon to the drinking water industry. Activated carbon is an efficient and cost-effective solution for removing a wide range of contaminants from industrial and municipal wastewater, contaminated ground and groundwater. We provide carbon services to some of the largest municipalities in the US for ground water/potable water filtration. We also supply other types of filter media such as anthracite, sand and gravel and supply various types of filtration...

    By Carbon Activated Corporation based in Compton, CALIFORNIA (USA).

  • Industrial Meshes for Sand Control Screens

    Modern petroleum exploration technologies operate with filtration technologies that are actually put through in the well. As a basic component of these sand control screens, SolidWEAVE stainless steel mesh is used for the filtration because they meet the most extreme requirements.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Water treatment solutions for the Drinking water & water reuse sector

    Water scarcity and the cost of water treatment has caused an increasing interest on water reuse for municipal and industrial reuse. Water treatment require mechanical filtration such as sand and anthracite filters to retain the particles that cause turbidity. Occasionally it is also necessary to reduce water hardness through ionic exchange or the adsortion of contaminants through the use of activated carbon. Our pressure vessels are suitable for any of type of filter media: sand, anthracite, silex, ionic...

    By Poltank S.A.U. based in Sant Jaume de Llierca, SPAIN.

  • Water and Wastewater Equipment for Water & Wastewater Treatment

    For over 30 years, Water and Wastewater Equipment Company has been providing efficient, cost-effective and compliant solutions to water and wastewater treatment applications, all the way from small batch systems to continuous-flow systems treating 500,000 gallons per day. Our technical analysts and designers are experienced in every phase of wastewater treatment – from fabrication, installation and laboratory testing – to systems management.

    By Water & Wastewater Equipment Company (WWE) based in Cleveland, OHIO (USA).

  • Water treatment solutions for the mining industry

    Mining release large volumes of water with a high conductivity due to the mineral salts that it contains. These effluents must be be treated with sand filters or activated carbon filters to reduce the environmental impact. Our range of filters in fiberglass reinforced polyester is highly resistant to corrosion and is, therefore, suitable to withstand these aggresive conditions.

    By Poltank S.A.U. based in Sant Jaume de Llierca, SPAIN.

  • WEDA Underwater cleaning robots in lagoons and large fountains

    The new Weda YT-5000 with a five (5) meter wide suction nozzler speeds up the cleaning process considerably. Estimated cleaning speed is up to 3000 sq. meters/hour. The cleaner removes efficiently bottom sedimentation (sand, algae etc.) from the bottom surface and pumps it to a selected discharge point (filter, waste etc).

    By Weda AB based in Södertälje, SWEDEN.

  • algae control in drinking water plants

    By controlling algae, cyanobacteria and fouling LG Sonic can efficiently reduce taste and odor problems in a treatment plant. The performance of a drinking water treatment plant is consistent with the amount ol contamination in the water. Growth of algae and other fouling in and before a treatment plant can cause various problems within the process. In general, these issues are related with taste or odor of the water. Growth of algae, cyanobacteria and bacteria within the basins of the plant itself, increase...

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Solutions for Petrochemical

    Petrochemical plants, and especially their process water recovery plants, are a major source of air pollution. If odours are a recurring problem, the emission of greenhouse gases may also be particularly important.

    By Pi² Technologies Inc based in Montreal, QUEBEC (CANADA).

  • Algae Control (Waste)Water treatment plants

    The LG Sonic technology controls suspended and filamentous algae without killing beneficial bacteria in (Waste)Water treatment plants.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Ceramic Flat Sheet Membrane for Drinking Water Treatment

    Today ceramic MF/UF membrane filtration for treatment of drinking water is becoming more and more accepted as a viable treatment method. This trends is mainly driven by an increasing demand for a more effective removal of especially challenging feed water containing:

    By Cembrane based in Lynge, DENMARK.

  • Water treatment solutions for the industrial industry

    All the industries including pharmaceutical, food&beverage, chemical, textil, paper & pulp, etc. require big quantities of water. The water used in any industrial process as for example heating, cooling or if it is going to be consumed directly in the process like in food & beverage industry should be purified and softened. Our range of pressure vessels can treat these effluents through sand, multimedia or activated carbon filters according to the needs.

    By Poltank S.A.U. based in Sant Jaume de Llierca, SPAIN.

  • Water treatment solutions for the mobile units industry

    Nowadays, drinking water is still not available for all the population. The development of mobile units makes possible the supply of drinking water to remote areas. We can design sand filtration systems adapted to specific demands for containerized water treatment plants

    By Poltank S.A.U. based in Sant Jaume de Llierca, SPAIN.

  • Sanding & Finishing

    Sanding & Finishing dusts are Unbreathable. Using any coated abrasive for sanding, polishing, or finishing introduces small amounts of both surfaces into the air. The particle size of the dusts produced in this application depends significantly on the abrasive’s grit size and composition, as well as the material being worked. Wood, metal, or plastics dusts each have specific health risks if inhaled. Companies involved in sanding, polishing, buffing and the use of abrasives on belt sanders, time savers and...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Water treatment solutions for the construction waters industry

    Construction site stormwater run-off, groundwater and dewatering water. Passive and active treatment systems.

    By Dungeness Environmental Solutions, Inc. (DESI) based in Everett, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you