Only show results available in Virginia? Ok

Sewage Monitoring Applications

  • Premium

    Visual inspection solutions for the plumbing camera in drain and sewage maintenance

    Video Inspection of pipelines and sewer systems is becoming more and more important, and is done with a digital camera essentially attached to a push rod to provide the user with a tool inserted down the pipes and that is able to inspect the inside of them, that would otherwise be inaccessible. The plumbing camera is attached to a screen for real time visualization that can also be recorded. These plumbing cameras can help visualize clogs and damage to pipes and sewer systems quickly in residential and commercial buildings.

    By Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Flow & Energy Management Solutions for water & waste water

    RH20 and EF10 (semi-portable). Well-suited for checking installed meters, leakage determination, network analysis and flow survey.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Odor Control in Sewage

    By The Definitive Deodorant Company based in North Kansas City, MISSOURI (USA).

  • Monitoring Sewage Flow

    Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Sewage Treatment Plants and Flow Sensors for Industry Application

    In sewage treatment plants, flow sensors are primarily installed for internal reasons. Ultrasonic flow meters are used to control the flow velocity in partially filled and fulfilled pressurized pipes, specific plant components, for leak detection or to control the use of additives. International regulations such as the EU-Directive for handling municipal waste water require flow metering for a continuous surveillance of waste water flow. Defective flow monitoring in sewage-treatment plants can therefore influence their operation, but there can also be legal or environmental consequences.

     

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Area-velocity flowmeter for measuring sewage and stormwater flow

    Greyline AVFM Area-Velocity Flow Meters are installed thoughout the country by Teletronic Denmark to monitor municipal sewage and stormwater. Application photos and descriptions illustrate flow monitoring in manholes and open channels.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the UviLux BOD Indicator can be applied to both water supply and water recovery processing plants. For water supply processing, the UviLux BOD Indicator can be applied at the front end to the water intake to provide alarm of any contaminated water entering the plant. Applications within Waste Water Treatment Works can include monitoring of effluent levels at the final outflow point (into rivers and coastal areas) as well as the primary, secondary & tertiary stages, the data potentially feeding into energy saving systems to optimise process performances. The CTG UviLux BOD Indicator in-situ fluorometer can also be used within pipe and channel networks to test for incidences of black water and grey water cross-over.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you