Only show results in Connecticut? Ok

Sludge Digestion equipment for Water and Wastewater

  • Showcase

    ARKEANS - Sludge Removal, Waste Degradation and Methane Booster

    ARKEANS® is a trade mark of Probiosphere Inc. Canada. Arkeans® is the result of a long time R&D development product for the purpose of sludge digestion and biogaz production. The result is a careful selection of Archaea bacterias and other beneficial microbes that live in symbiosis to fully biodegrade tougher organic wastes. The ...

    By Probiosphere Inc. based in Riviere-Du-Loup, QUEBEC (CANADA).

  • Premium

    Fluence CYCLONE - Coarse Bubble Diffuser

    A diamond-shaped, open-ended design maximizes bubble-shearing action and offers a simple approach to solving clogging issues. CYCLONE coarse bubble diffusers are easy to install, require no scheduled maintenance, and are perfect for any coarse bubble system. The Cyclone is a proven performer. It’s easy to install and needs no scheduled ...

    By Fluence Corporation based in White Plains, NEW YORK (USA). from Coarse Bubble Diffuser Product line

  • Premium

    Fluence HURRICANE - Submersible Aerator

    This uniquely designed aerator provides oxygen from the bottom up without the need for an external blower, providing 360-degree radial mixing. The Hurricane submersible aerator’s 360-degree radial mixing system incorporates new, unique air diffusers for high oxygenating efficiency and thorough mixing over a wide area.

    By Fluence Corporation based in White Plains, NEW YORK (USA). from Submersible Aerator Product line

  • Premium

    Andritz - Sludge Treatment for Cement Factories

    Incineration of sewage sludge in cement factories is becoming a more and more interesting issue worldwide. Besides that municipalities can solve the disposal problem of dewatered or dried sewage sludge, cement factories offer a perfect match for the treatment necessities of sewage sludge. The dried sludge can be used as fuel and, depending on its ...

  • Premium

    ExtremeDuty™ - Sludge Mixer

    WesTech ExtremeDuty™ Sludge Mixers provide vigorous mixing of digester contents to prevent stratification and improve the anaerobic process. They reliably speed gas production while reducing foaming and scum accumulation. This rugged design was originally developed to reduce the high service costs of egg-shaped digester mixers. It has proven to be ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Sludge Mixer Product line

  • Premium

    Andritz - Partial Sludge Drying

    Many wastewater treatment plants handle a waste stream of digested sludge. the sludge is normally dewatered on a centrifuge or belt filter press. After dewatering, the sludge has a typical dry solids content of approx. 20-25%, which is very suitable for thermal treatment i an ANDRITZ Gouda paddle dryer. More and more sludges are being incinirated, ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Partial Sludge Drying Product line

  • Premium

    Andritz - Sludge Drying Process System

    Economic, compact and safe The ANDRITZ Paddle dryer can be used for dewatering sludge (of various types) in waste water treatment plants. Many wastewater treatment plants are coping with a waste stream of digested sludge. The sludge is normally dewatered by means of a centrifuge or belt filter press. After dewatering the sludge has a typical dry ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Sludge Drying Process System Product line

  • Premium

    WesTech CleanGrit™ - Organics Removal Systems

    WesTech CleanGrit™ products remove organic matter from grit collected at the headworks of a wastewater plant. Removal of the organic matter from grit will reduce disposal costs and nuisance odor complaints while improving biological plant processes. WesTech offers the largest variety of grit washing systems available in the North American market.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Organics Removal Systems Product line

  • Premium

    ANDRITZ - Gouda Paddle Dryer

    The machine has a heated through, containing rotating heated paddle shafts. The specially shaped paddles do not have a transport function but are designed for maximum heat transfer. This results in an excellent control of the temperature of the product and enables a uniform product quality. At the outlet side, the product moves out of the machine ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Gouda Paddle Dryer Product line

  • Premium

    Omega - Model MD - Gravity Belt Thickener

    The OMEGA Gravity Belt Thickener is designed for continuous mechanical thickening of municipal or industrial sludge. OMEGA's innovative and efficient technology reduces sludge volume by at least 4 times.

    By Aqualitec Corp. based in Los Angeles, CALIFORNIA (USA). from Gravity Belt Thickener Product line

  • Premium

    ennox - Model PSD - Spraying Unit

    Floating covers or sludge accumulations forming on the substrate surface in the digester can be combated with a pivoting stainless steel spraying unit PSD. Normally the spraying unit is welded into the gas dome or manhole cover, can be rotated 360° and can pivot within the space available. The water connection can be achieved with a STORZ or ...

    By ennox biogas technology GmbH based in Hard, AUSTRIA. from Spraying Unit Product line

  • Premium

    NIVUS - Model POA-V2XXR - Correlation Pipe Flow Sensor

    Medium measurement range for levels up to ca. 1m. Cross correlation sensors for flow velocity and level detection in part filled and full pipes and channels. For installation in pipes. POA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The pipe-shaped sensors are designed for installation in ...

    By NIVUS GmbH based in Eppingen, GERMANY. from Correlation Pipe Flow Sensor Product line

  • Premium

    NIVUS - Model POA-V2XXK - Correlation Wedge Flow Sensor

    Medium measurement range for levels up to ca. 1m. Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom. POA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The wedge-shaped sensors are designed for ...

    By NIVUS GmbH based in Eppingen, GERMANY. from Correlation Wedge Flow Sensor Product line

  • Premium

    NIVUS - Model CS2-V2 - Correlation Wedge Flow Sensor

    Large measurement range for high flow levels: Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom. CS2 flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media in channels mainly featuring high levels. The ...

    By NIVUS GmbH based in Eppingen, GERMANY. from Correlation Wedge Flow Sensor Product line

  • Premium

    EnviroDEFENSE - Complete Wastewater Treatment Systems

    The naturally occurring bacteria formulated in EnviroDEFENSE WasteWater Complete works by digesting organic waste materials to prevent malodorous conditions and sludge buildup. EnviroDEFENSE WasteWater Complete has also demonstrated great success in the degradation of many types of industrial wastes including surfactant, solvent and polymer ...

    By BCMbio, Inc. based in Armada, MICHIGAN (USA). from Complete Wastewater Treatment Systems Product line

  • Premium

    Komline-Sanderson - Paddle Dryer for Biosolids, Sludge, and Residuals Drying

    The K-S Paddle Dryer is used worldwide for drying a variety of sludges, biosolids and by-products, to generate dry stable products, reduce disposal cost and convert waste into marketable by-products. In municipal waste water treatment plants (MWWTP) the K-S Paddle Dryer System produces Class A Biosolids in accordance with the EPA's 503 regulations ...

    By Komline-Sanderson based in Peapack, NEW JERSEY (USA).

  • Premium

    GCER - GRP Covers

    GCER - Your industrial cylindrical cover designer: Always in a perspective of providing you the best and complete services. We design and build for your freestanding modular covers to adorn your tanks, your clarifiers, digesters and your sludge thickeners with civil engineering.

    By GCER based in Ksibet, TUNISIA. from GRP Covers Product line

  • Premium

    Flottweg - Model HTS - Sewage Sludge Dewatering Decanter Centrifuge

    The Flottweg HTS Decanter: Highest Dry Matter Content for Sewage Sludge Dewatering. Transport and disposal costs, at over 70 percent, represent by far the largest cost item in sludge dewatering. A powerful dewatering assembly is thus an important criterion. With a Flottweg HTS Decanter in the C series, you can achieve the highest possible total ...

    By Flottweg SE based in Vilsbiburg, GERMANY. from Sewage Sludge Dewatering Decanter Centrifuge Product line

  • Premium

    Albin - Model MG - Rotary Lobes Pump 90 to 300m³/h - up to 5 bar

    Specifications: Flow rate: 90 to 300 m 3/h. Pressure discharge: up to 5 bar. Suction lift: -5mCe. Suction/ discharge: DN80-150. Body: IRON GG30. Lobes (bean): Cast IRON coated NBR-V1TON-PU-EPDM. Seal: Double radial seal, grease lubricated. Wearing plate: Galvanized steel. Motor: Motor IE2-IE3 11 - 55 Kw. Weight: 1225 -1365 kg.

    By Albin Pump SAS based in Montelimar, FRANCE. from Rotary Lobes Pump 90 to 300m³/h - up to 5 bar Product line

  • Premium

    ANAMMOX - Ammonia Removal

    'Cost-effective, sustainable removal of ammonium from effluents and ammonia from waste gas'. The ANAMMOX® process is a cost-effective and sustainable way of removing ammonium from effluents and ammonia from waste gas. Compared to conventional nitrification/denitrification savings on operational costs can reach up to 60%, while CO2 emission is ...

    By Paques Technology B.V. based in EL Balk, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you