Only show results in Connecticut? Ok

Sludge disposal Applications

  • Premium

    Dewatering and thickening of municipal sewage sludge

    Dewatering and Thickening of Municipal Sewage Sludge using the Decanter. Flottweg has more than 50 years of experience in dewatering and thickening sewage slurry. We know the special requirements of sewage treatment plants and the water industry. As a result, we have developed a special decanter series especially for sewage treatment plants: the Flottweg C series.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    Wastewater, sludge, and biosolids applications

    Komline-Sanderson`s pumping, thickening, dewatering, and drying technologies are used to help both municipal and industrial wastewater (sewage) treatment plants reduce their sludge and biosolids disposal cost. Thickening greatly reduces the sludge volume for land application or improved digester performance. Belt press dewatering meets landfill disposal requirements for cake solids. Indirect drying allows for disposal cost reduction and for the beneficial use of biosolids as soil amendments (fertilizers), sludge...

    By Komline-Sanderson based in Peapack, NEW JERSEY (USA).

  • Process Belt Meshes for Dewatering / Pressing with Belt Presses

    WEAVEinMotion process belts are effective and robust cores for belt presses which are particularly efficiently acting systems for dewatering sludges and fruit mashes. A decrease in transport, disposal and recycling costs is obtained thanks to the reduction in volume achieved.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Industrial wastewater treatment systems for metal industry

    Removal of heavy metals (chrome, cadmium, zinc) suspended solids, oils and grease from aircraft stripping, painting and maintenance operations.

    By Ecolotron, Inc. based in E. Dickinson, TEXAS (USA).

  • Drinking water solutions for the coagulation optimization

    Problem: Drinking water plants that use surface water or ground water under the influence of surface water are susceptible to high levels of organic matter in the raw water. Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization...

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Industrial wastewater treatment systems for plating wastewater treatment

    Plating Wastewater Treatment Application: Wastewater generated from chrome and nickel plating operations. Prior Treatment Method: Chrome and nickel streams were segregated because of characteristics. Chrome was reduced from hexavalent to trivalent state then combined with the nickel stream. The full stream was then precipitated via typical hydroxide precipitation methodology. Broad swings in the contaminate concentrations resulted in poor treatment and the facility was issued several NOVs.

    By Ecolotron, Inc. based in E. Dickinson, TEXAS (USA).

  • Zero Liquid Discharge wastewater solution

    Zero Liquid Discharge (ZLD) describes a process that completely eliminates liquid discharge from a system. The goal of any well-designed ZLD system is to minimize the volume of wastewater that requires treatment, process wastewater in an economically feasible manner, while also producing a clean stream suitable for reuse elsewhere in the facility. Interest in ZLD technology has grown in the industrial manufacturing sector over the past decade. Companies may begin to explore ZLD because of ever tightening wastewater...

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Aquatech Enhanced Oil Recovery (EOR)

    In a Steamflood Enhanced Oil Recovery (EOR) process, steam is injected in the well, lowering the viscosity of heavy oil suitable for extraction through the production wells. The fluid from the wells is a mixture of oil, water and gas and goes through a separation system to separate the three. The separated produced water is heavily contaminated with dissolved solids and hydrocarbons. Aquatech’s Steamflood Enhanced Oil Recovery (EOR) Technology offers the integrated solutions for the treatment EOR produced water...

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Aeration and mixing technologies for pulp and paper treatment

    Pulp and paper mills produce large volumes of wastewater and residual solids, presenting a number of issues in relation to pulp and paper wastewater treatment, discharge, and sludge disposal. We understand that you are seeking wastewater treatment that reliably meets permit limits, while minimizing costs, and maintaining consistent production. We will work with you to find an effective way to optimize oxygen dispersion, reduce sludge accumulation, and eliminate the need for costly dredging.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Using evaporation to dewater Reverse Osmosis reject waste streams

    Reverse Osmosis (RO) technology has been used for years in various industries to separate dissolved solids from water by forcing the water through a semi-permeable membrane. RO is also commonly used to purify drinking water and desalinate seawater to yield potable water. The water and other molecules with lower molecular weight (specific weight of molecules allowed to pass through is dependent on the selected membrane) pass through the micropores in the membrane, yielding a purified water stream called the...

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Evaporation technology for chemical industry

    Water is one of the most important solvent or component in the chemicals production industry. From the production of water as a solvent for formulas, to the water used for mixers and reactors washing operations, the management of the whole water cycle from inlet to final discharge is a primary importance issue to face.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Industrial wastewater treatment systems for petro chemical industry

    Treating off spec wastewater containing Raney Nickel, chromium, zinc and high levels of organics. Metals must be removed prior to bioreactor.

    By Ecolotron, Inc. based in E. Dickinson, TEXAS (USA).

  • Decanter Centrifuges for Sludge Dewatering Applications

    Diverse industrial applications for liquid/solid separation and sludge dewatering demand efficient and cost-effective solutions. Since its invention over 100 years ago the solid bowl centrifuge, also called a decanter, has established itself as conventional solution for this task across many sectors. The majority of these applications target the separation from the liquid and solid phase whereby, generally, the least possible residual moisture is required in the solid phase and the lowest possible solid particle...

    By Hiller Separation and Process based in Lampasas, TEXAS (USA).

  • X-ray fluorescence XRF analysis for environmental protection and waste management

    To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as...

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you