Only show results in Massachusetts? Ok

Sluice Gates equipment for Water and Wastewater

  • Premium

    Rotork - Model IB Series - Multi-Turn Bevel Rotary Devices

    Complete range of heavy-duty cast iron multi-turn bevel gearboxes suitable for the most demanding motorized applications for cast and fabricated sluice gates, gate valves and globe and pinch valves.

    By Rotork plc based in Bath, UNITED KINGDOM. from Multi-Turn Bevel Rotary Devices Product line

  • Premium

    Matergear - Model SS Bevel Range - Stainless Steel Bevel Gear Operators

    Heavy-duty stainless steel 316 housing multi-turn gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch valves.

    By Rotork plc based in Bath, UNITED KINGDOM. from Stainless Steel Bevel Gear Operators Product line

  • Premium

    Model DSB Range - Dual Shaft Bevel Gear Operators

    Complete range of multi-turn bevel gearboxes with two shafts for use with dual stem sluice gates and penstocks. Torque range up to 8,135 Nm (6,000 lbf.ft). Thrust range up to 1,320 kN (296,750 lbf). 13 sizes. Ratios from 1:1 to 120:1.

    By Rotork plc based in Bath, UNITED KINGDOM. from Dual Shaft Bevel Gear Operators Product line

  • Premium

    Rotork - Model MTW Range - Multi-Turn Worm Gearboxes

    The multi-turn worm gearboxes are used for applications such as sluice gates and dampers.Torque range up to 162,000 Nm (119,000 lbf.ft).11 sizes. Ratios from 40:1 to 5,760:1.

    By Rotork plc based in Bath, UNITED KINGDOM. from Multi-Turn Worm Gearboxes Product line

  • Premium

    Rotork - Mastergear Large Bevel Gear Range

    Complete range of ductile iron multi-turn bevel gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch valves.

    By Rotork plc based in Bath, UNITED KINGDOM. from Mastergear Large Bevel Gear Range Product line

  • Premium

    Model HOB/MPR Range - Bevel Gear Operators

    Hand operated bevel gears suited for sluice gates, gate, and globe valves. Torque range up to 8,018 Nm (5,914 lbf.ft). Thrust range up to 1,557 kN (350,028 lbf). 12 sizes. Ratios from 2:1 to 81:1.

    By Rotork plc based in Bath, UNITED KINGDOM. from Bevel Gear Operators Product line

  • Premium

    Rotork - Model HOB/MPR - Bevel Gear Operators

    Hand operated bevel gears suited for sluice gates, gate, and globe valves.Torque range up to 8,018 Nm (5,914 lbf.ft).Thrust range up to 1,557 kN (350,028 lbf).12 sizes. Ratios from 2:1 to 81:1.

    By Rotork plc based in Bath, UNITED KINGDOM. from Bevel Gear Operators Product line

  • Premium

    Model MTW Range - Worm Gearboxes

    The multi-turn worm gearboxes are used for applications such as sluice gates and dampers. Torque range up to 162,000 Nm (119,000 lbf.ft). 11 sizes. Ratios from 40:1 to 5,760:1.

    By Rotork plc based in Bath, UNITED KINGDOM. from Worm Gearboxes Product line

  • Premium

    Model IS Range - Motorised Multi-Turn Gearboxes

    Complete range of heavy-duty cast iron multi-turn spur gearboxes suitable for the most demanding motorised applications where the gearbox input shaft needs to be parallel with the valve stem for globe and gate valves and sluice gates.

    By Rotork plc based in Bath, UNITED KINGDOM. from Motorised Multi-Turn Gearboxes Product line

  • Premium

    Rotork - Model IS Series - Motorised Multi-Turn Gearboxes

    Complete range of heavy-duty cast iron multi-turn spurgearboxes suitable for the most demanding motorisedapplications where the gearbox input shaft needs to beparallel with the valve stem for globe and gate valves andsluice gates.Torque range up to 43,386 Nm (32,000 lbf.ft).Thrust range up to 2,900 kN (652,000 lbf).20 sizes. Ratios from 1:1 to ...

    By Rotork plc based in Bath, UNITED KINGDOM. from Motorised Multi-Turn Gearboxes Product line

  • Coldwell-Wilcox - Sluice Gates

    Sluice gates are fluid control products that provide a mechanical means of controlling liquid flow through an opening in a variety of applications within the water and wastewater industry. The Coldwell-Wilcox sluice gates meet and exceed the requirements of the AWWA standard for cast slide gates. Sluice gates can be cast in A126 class B cast iron, ...

    By Coldwell-Wilcox Technologies, LLC based in Cincinnati, OHIO (USA). from Sluice Gates Product line

  • In-Eko - Screw Press

    The In-Eko Screw Press is manufactured of 304 Stainless Steel and is a beneficial accessory to the Mechanical Bar Screen. Generally placed below the outfall of the head of the bar screen, the screw press will dewater and compact the screened material. The pressed screenings then travel out the chute into the receptacle of your choice, and the ...

    By Purestream ES, LLC based in Walton, KENTUCKY (USA). from Screw Press Product line

  • Stainless Steel Lifting Gear

    The stainless steel sluice gate has a lifting capacity of up to 2T, and has the same characteristics as a standard sluice gate drive. It is particularly useful for managing accumulated rain water alongside motorways.

    By FEUGIER environnement based in Sault Brénaz, FRANCE. from Stainless Steel Lifting Gear Product line

  • Model RR Series - Round Flap Gate

    Round swing check gate to be wall-mounted or flanged, intended to prevent backflow and commonly installed at the end of a line, as a check valve. Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many different pressure heads. May include a ...

    By Orbinox based in Anoeta, SPAIN. from Round Flap Gate Product line

  • Sluice Gates

    Sluice gates which are used in water and waste water treatment plants offer a wide range of driving unit and material options. Perennial and easy to use sluice gates are manufactured which will assure the impermeability. We can group the sluice gates into two according to the application areas.

    By ARI Arıtma based in Kullar-Başiskele, TURKEY.

  • Sluice Gates

    Waterman Heavy Duty Sluice Gates have been successfully used in a wide variety of applications, including municipal water works and treatment facilities, flood control projects, reservoirs, and fish hatcheries. Gate shapes include square or rectangular with square, rectangular or circular opening, and can be furnished with standard flanged back or ...

    By Waterman Industries of Egypt based in Cairo, EGYPT.

  • TESI - Parking Area Drainage “Cut-Off” Gates

    TESI has developed a “sluice” gate that comes in two sizes that can be installed in either the concrete poured walls or asphalt curbing around your tanker truck parking area. These either 12″ wide by 6″ deep or 18″ wide by 12″ deep models are manufactured with small wires extruding from the steel frame for ...

    By Trans Environmental Systems, Inc. (TESI) based in Charlottesville, VIRGINIA (USA). from Parking Area Drainage “Cut-Off” Gates Product line

  • Sluice Gates

    Sluice gates are used for flow control at the inlet and outlet structures of basins or units. The design of these structures complies with either AWWA C560 ,BS 7775 or DIN EN 19569 standards. These can be operated manually or automatically upon client requests. Sluice gates can be manufactured from aluminum, epoxy coated or galvanized steel or ...

    By Yeditepe Aritim based in İstanbul, TURKEY. from Sluice Gates Product line

  • RIA MTV - Model DN 100-150 - Sluice Gate

    Tight from mounting side.Appllication as way and motorway sluice.Materials:Frame: EN 1.4404 - PEHD 500.Plate: EN 1.4404.Pressure: On-seating pressure, max. 4 mWs.DIN 19569 table 4 cl.3.Operation:Manual.

    By PROAGRIA MILJO A/S / PROAGRIA Landbrug A/S based in Otterup, DENMARK. from Sluice Gate Product line

  • Telescopic Valves

    The telescopic valve has the function of regulating and/or blocking the extraction of the liquid in a basin, thanks to the cursor height adjustment, which is controlled manually (by handwheel) and/or automatically (by actuator). The hydraulic seal is ensured by an O ring, having a section suitable for the cursor diameter.

    By FRIULANA COSTRUZIONI s.r.l. based in Vigonovo Di Fontanafredda, ITALY. from Telescopic Valves Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you