Only show results in Massachusetts? Ok

Strainers services for Water and Wastewater

  • Premium

    CECO Peerless Skimovex - Produced Water & Oily Water Treatment Solutions

    Our Peerless brand’s Skimovex oily water technology is custom-designed to remove oil from water in applications such as: Production facility produced water (both on-shore and off-shore). Refinery effluent, Petrochemical tank farm drains and washdown water, Ballast water, De-salter effluent, Condensate, Cooling water, Tank draw-off, Injection ...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Industrial Valves Design

    A reliable partner for industrial valves design, Thanks to our swift design processes and custom made solutions, we provide the finest products and services in accordance with your needs and specifications, saving you time and eliminating unnecessary worries. 

    By IMP ARMATURE d.o.o. based in Ivančna, SLOVENIA.

  • Pre-Commission Cleaning

    The pre-commission cleaning of hot water heating and chilled systems has become more important over recent years, due to the equipment used being more susceptible to blockages at strainers, control valves and small bore heat exchangers. System contaminants such as millscale, jointing compounds and fabricating debris need to be removed by chemical ...

    By WHS Group based in Horsforth, UNITED KINGDOM.

  • Modular Construction Services

    Our products are custom designed and fabricated for each individual project. While we don’t stock finished goods or “off-the-shelf” products, we do stock carbon and stainless steel materials allowing us to meet even the shortest of delivery schedules. Materials such as fiberglass reinforced polyester (FRP), polypropylene, monel, ...

  • Water Treatment Service

    The importance of an effective water treatment regime within any building can never be overstated. Properly designed and managed water treatment programmes not only ensure a system and the associated plant is operating effectively and cost effectively, but can also greatly increase the effective life span of the plant and reduce running costs. H2O ...

    By H2O Nationwide Ltd based in Basildon, UNITED KINGDOM.

  • Dolphin - Installation and Operationl Services

    Always comply with local, State, Federal and any other applicable laws and codes when installing the pump. A power supply circuit to the pump must have a ground fault circuit interrupter (GFC). The pump must be grounded with a #8 AWG or larger conductor, from the external grounding mount on the pump to a single grounding source. DO NOT tamper with ...

    By Dolphin Pumps based in Pensacola, FLORIDA (USA).

  • Plumbing & Flow Control Solutions

    The plumbing & flow control solutions from our companies are designed to facilitate efficient water conveyance and control for commercial, residential, and waterworks applications.

    By Watts Industries Europe B.V. based in Amsterdam, NETHERLANDS.

  • Pre-Commission Pipework Cleaning Services

    System contaminants such as millscale, jointing compounds, and building debris will inevitably be found in newly fabricated pipework systems. Contaminants can cause blockages (e.g. at strainers, control valves & small bore heat exchangers) lead to corrosion and encourage the growth of micro-organisms. The chemicals used for cleaning must be ...

    By 3C Environmental Technology based in Hampshire, UNITED KINGDOM.

  • Pre-commissioning Cleaning Services

    New pipe work often contains debris leftover from construction which can cause corrosion, damage and encourage microbiological growth which will in turn cause corrosion, blockage etc. Flushing, chemical cleaning and system stabilisation is required for heating, chilled and condenser circuits also. This work will increase plant efficiency and ...

    By Aqua Technologies (Europe) Ltd based in Middlesex, UNITED KINGDOM. from Water Treatment Service line

  • Inventory Services

    We fabricate our steel replacement components exactly to OEM specifications, and all of our steel is manufactured by steel mills and is OEM-certified. Material certifications accompany every shipment. Our parts are designed and made specifically for high-temperature service, and this commitment to detail is just another factor that separates ...

    By Schmidt Industries, Inc. based in Bay City, MICHIGAN (USA).

  • Pre-Commission Cleaning of Pipework Services

    The pre-commission cleaning of closed loop systems has become more important over recent years; due to the equipment used being more susceptible to blockages at strainers, control valves and small bore pipework.System contaminants such as millscale, jointing compounds and fabricating debris need to be removed by chemical cleaning and high velocity ...

    By HBE Risk Management based in Newry, NORTHERN IRELAND.

  • Function Protection for Improving Security in Power Plants

    Efficiency improving products, products for function protection and for improving security in power plants. Maxxtec has done pioneering work in developing various applications for ORC processes. In many cases such power plants require much higher standards for operational safety and stability of the plants than is necessary for industrial ...

    By NRGgroup GmbH based in Bad Arolsen, GERMANY.

  • Operation Services

    The system is designed to start and stop automatically, without computer control. We use a state-of-art sensor-driven control system to monitor and control the operation of the system and adjust operational parameters as required to maintain the target effluent characteristics. Servicing is normally done monthly or bi-monthly. We have numerous ...

    By Tailwater Systems based in Salinas, CALIFORNIA (USA).

  • Maintenance Services

    When water in the solar heater is used up during bath, you can add cold water for some minutes to put hot water in vacuum tube out by the principle that cold water sinks and hot water floats, and the bathing is going on.

    By Tangshan Dingre Solar Energy Technology Co.,Ltd based in Luannan, Tangshan, CHINA.

  • Microfiltration Services

    MF covers a variety of technologies including (in decreasing levels of coarseness): Manually cleaned and self-backwashing strainers are available ranging from 500 to 2 microns retention rating. Disposable bag and cartridge filters are usually housed in plastic or stainless steel housings and are often used to pretreat or protect the higher value ...

    By ACWA Services Ltd based in Skipton, UNITED KINGDOM. from Water Service line

  • Engineering Services

    Based in Brisbane, Armstrong Flow Control has it’s own inhouse design, fabrication and testing facilities to custom manufacture specialised valves / assemblies to specific customer requirements. Our workshop facilities include equipment for general machining such as turning, milling and drilling by fully experienced tradespeople and ...

    By Armstrong Flow Control (AFC) based in Capalaba, AUSTRALIA.

  • Chemical Cleaning Services

    New pipework installations on heating and chilled water systems will require the removal of contaminate debris such as milli-scale, jointing compounds and building debris. These contaminants will increase the risk of blockage at strainers and small bore control valves. Advances in modern day systems have made the process of pre-commission cleaning ...

    By Clearwater based in Camberley, UNITED KINGDOM.

  • Consulting Services

    Technical Products and Services, Inc. practices Consultation Selling. We utilize our 25 years of experience and the engineering resources of the manufacturers to assist with solving your specific application. Due to the complimentary nature of our product offering, we are knowledgeable of several system components often involved in an industrial ...

    By Technical Products and Services based in Blairstown, NEW JERSEY (USA).

  • Plumbing & Flow Control Solutions

    The plumbing & flow control solutions from our companies are designed to facilitate efficient water conveyance and control for commercial, residential, and waterworks applications.

    By Watts Water Technologies based in North Andover, MASSACHUSETTS (USA).

  • GG - Servicing Services

    GG Compactors Servicing provide on-site certified staff training on all machines.GG Compactor Servicing Limited operates a nationwide network of experienced electrical & hydraulic engineers that are able to cover all aspects of trash compactor repair and maintenance. We can maintain or repair any make of compactor, baler or associated ...

    By G.G. Compactors Limited based in Bognor Regis, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you