Only show results available in Connecticut? Ok

Tannery Wastewater equipment for Water and Wastewater

  • Premium

    WesTech - CleanFlo™ Spiral Screen

    WesTech CleanFlo™ Spiral Screens provide efficient, economical screening for plants with flows less than 10 MGD. Screening, conveying and compaction are all performed by one drive motor. The stainless steel screen panel is automatically cleaned by long-wearing segmented brushes attached to a one-piece shaftless spiral auger.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Screening Product line

  • Premium

    Intereco - Model EDOM and CAB - Belt Presses

    After a twenty years long experience of units installed all over the World, INTERECO produce belt press to 3000 mm belts width. Apt for any type of sludge: Biological, chemical, paper milk dairy, inert and tanneries. To save money for the shipment, it is no necessary to use wood cages. For a belt press CAB 2000 is enough a 20” Flat Rack. ...

    By Intereco S.a.s based in Scalenghe (TO), ITALY. from Sludge Treatment - Belt Press Product line

  • Bioclean - Wastewater Bioremediation

    Biodegradation is the Earth's natural process of converting organic matter into environmentally safe by-products including water, carbon dioxide and methane gas. This process is accomplished through naturally occurring micro-organisms such as bacteria and fungi. Although these micro-organisms are naturally occurring, certain extraneous factors may ...

    By Organica Biotech Pvt. Ltd. based in Mumbai, INDIA.

  • Bioclean

    Biodegradation is the Earth's natural process of converting organic matter into environmentally safe by-products including water, carbon dioxide and methane gas. This process is accomplished through naturally occurring micro-organisms such as bacteria and fungi. Although these micro-organisms are naturally occurring, certain extraneous ...

    By Ativa Biosciences based in Mumbai, INDIA.

  • HAUS - Model DDE 4042 - Decanter Centrifuges

    Decanter centrifuges are used in separation of the solid-liquid or solid-liquid-liquid suspensions. The machine is consist of a solid cylindrical bowl rotating at high speed, a scroll rotating in the same axis with a slightly different speed, gear box adjusting the speed difference and the body which carries all the rotating elements. The product ...

    By HAUS Centrifuge Technologies based in Aydin, TURKEY. from Environmental Applications Decanters Product line

  • Reko - Pressure-Fed Bow Screens and Cleaning Systems

    Separation of solids from waste water and process water by means of a bended wedge wire screenplate.

    By REKO Industrial Equipment b.v. based in Stellendam, NETHERLANDS.

  • Reko - Internally-Fed Drum Screens

    Separation of solids from waste water and process water by means of an internally-fed rotating drum screen.

    By REKO Industrial Equipment b.v. based in Stellendam, NETHERLANDS.

  • PFTech - Screw Press

    The screw press is designed for the separation and dewatering of solid particles from suspension. The main element of the press is a separating-dewatering-pressing and transport screw unit powered by one geared motor. The whole is located on a stable construction. Dewatering and pressing of solid particles take place on a conical slot screen ...

    By PFTech Spólka z o.o. based in Wierzbica, POLAND.

  • Purity - Model ECF - Particular Electrolytic Treatment System

    The electroflotation process ECF® Technology is based on a particular electrolytic treatment of aqueous solutions in which is triggered a series of electrode and chemical reactions associated with physical processes able to promote the transformation and the subsequent removal of the contaminants . All this requires substantially no addition ...

    By Purity S.r.l. based in BRUGHERIO (MB), ITALY.

  • PPC - AIR Biofiltration System

    Biofiltration is a process to purify air and water biologically with the aid of micro-organisms, specifically bacteria.

    By PPC Industries based in Longview, TEXAS (USA).

  • Pollution Control - Wastewater Aeration Systems

    Our fine bubble aeration systems can be installed in existing tanks or in lagoons, it can be a permanently fixed or removable system. The system is very flexible and can be adapted to suit a wide range of applications and effluents.

    By Pollution Control (UK) Ltd based in Preston, UNITED KINGDOM. from Wastewater Treatment- Industrial Trade Effluent Product line

  • Super Shredder - High-Flow, Low Headloss Inline Disintegrator

    The Super Shredder in-line disintegrator reduces tough wastewater solids to fine bits with a unique, high flow, spherical rotor design. The unit is specifically designed for high capacity and minimal headloss. In fact, because of its high percentage of open area, the Super Shredder remains practically invisible to flow. The Super Shredder is ...

    By Franklin Miller Inc. based in Livingston, NEW JERSEY (USA). from Wastewater Grinders Product line

  • Effluent Treatment Plant

    Our Effluent Treatment Plant is the most cost effective solution for treating a large quantity of commercial and industrial effluents. These effluents are harmful to the environment and cause pollution. The plants are developed and engineered to handle these effluents for a quality discharge in order to meet the strict pollution control norms.

    By Canadian Crystalline based in Chennai,, INDIA. from Effluent Treatment Plant Product line

  • ALKEN CLEAR-FLO 7008

    ALKEN CLEAR-FLO 7008 is a concentrated dry blend of selected bacteria with a broad spectrum of organic degradation capabilities, specifically balanced for industrial wastes. This new improved formula still handles odors, aliphatic and aromatic hydrocarbons and phenolic compounds, but will now degrade fatty acids, tannery wastes, pharmaceuticals, ...

    By Alken-Murray Corporation based in Flint Hill, VIRGINIA (USA).

  • Top Machinery - Model TPBS - Sieve bend screen filter and static screen

    Product IntroductionSieve Bend Screen  Filter is a small-scale unpowered separate equipment, used for processing the suspended solids, floating objects, and sediment, etc… during the sewage treatment. The material of this equipment normally adopt 304 stainless steel, and the gap can be made different size, such as ...

    By Top Machinery (Chengdu) Co.,Ltd based in Shuangliu, Chengdu, CHINA.

  • Ammonium Chloride 99.5%

    Property: White powdered crystal or granular, specific gravity 1.532. easily absorbs moisture, and forms a cake, soluble in water, and the solubility varies as the temperature increases. Cautions : Avoid Moisture and water, do not transport together with alkalis and acids. Application: Its principal use is in mining, tannery and fertilizer. also ...

    By Weifang Haibin Chemical based in Weifang, CHINA. from Ammonium Chloride 99.5% Product line

  • CEC Tanks - Removable Industrial Effluent Tanks for Waste Water / Sewage Treatment

    We design and manufacture removable industrial effluent tanks for waste water or sewage treatment in China. We have more than 30 years in industrial effluent tanks design, manufacture and installation, All our industrial effluent tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ...

    By Center Enamel Co., Ltd based in Guangzhou, CHINA. from Industrial Water Tanks Product line

  • OdorFilterTM Systems

        MV Technologies OdorFilterTM Systems are designed to optimize the performance of dry scrubber technologies to neutralize malodorous sulfur bearing compounds and H2S vapors while ensuring the most cost-effective solutions based on unique system parameters.MV Technologies offers both enhanced iron ...

    By MV Technologies, LLC based in Golden, COLORADO (USA). from Industrial Odor Control & Safety Product line

  • CMO - Model PS/PST Inox Series - Single Screw Pump

    The CMO pumps with worm feed screw belong to the rotating positive-displacement pump category. With simple construction, the pumps are intended above all for pumping dense and/or viscous fluids.

    By C.M.O. POMPE s.n.c. based in Orgiano (VI), ITALY.

  • CMO - Model LB Series - Lobe Pump

    The heart of the machine is made up of two lobe rotors mounted on parallel axes. They rotate in a synchronised manner inversely to each other, inside a proofed chamber. The rotors have three or four lobes, according to the pump size. The combination of the rotor movements creates suction and delivery, and the special helicoidal shape of the lobes ...

    By C.M.O. POMPE s.n.c. based in Orgiano (VI), ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you