Only show results in Texas? Ok

Valves services for Water and Wastewater

  • Premium

    Parts and Deliverables Supply Services

    Paques Services delivers (spare) parts for the installed base of Paques wastewater and gas treatment installations. Reliable delivery is ensured, as Paques keeps track of the original design data.

    By Paques Technology B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Services

    From the most complicated data highway interfaces to the simplest open vent, L&J Technologies is the single source for your tank service needs. For more than thirty years, L&J Technologies technical service specialists have repaired computer systems, electronic gauges, conservation vents, and other tank fittings.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA).

  • Premium

    KEG - Troubleshooting Services

    It is essential to troubleshoot your jetting equipment correctly. When testing the jetting system, it is essential to understand where the water is going. It is vital to understand the readings provided when checking your equipment. The problem is not always what is thought to be the obvious one.

    By KEG Technologies, Inc. based in Spartanburg, SOUTH CAROLINA (USA).

  • Premium

    New Valve Automation Services

    The careful assembly of the valve to the actuator is critical to ensure that an automated valve performs correctly and reliably. There is a growing need for actuators to be installed on valves after they have left the valve manufacturer’s factory.

    By Rotork plc based in Bath, UNITED KINGDOM.

  • Premium

    Small Pipeline Leak Detection Method

    The smallest leaks include damage to pipes in which the noise of the medium flowing out cannot be measured with acoustic location methods. This may be the case if there are hairline cracks where the amount of medium flowing out is too low to be measured or if there aren't any measuring points for noise sensors or if the points are too far away. To ...

    By Hermann Sewerin GmbH based in G├╝tersloh, GERMANY. from Network Survey Service line

  • Premium

    System Integration Services

    Rotork has extensive expertise in the design, manufacture and installation of custom control systems in pressure, temperature, level and flow applications within the process control industry. Rotork products integrate seamlessly with the majority of industrial control systems as well as our proprietary Pakscan network control system.

    By Rotork plc based in Bath, UNITED KINGDOM.

  • Maintenance and Repairs Services

    Hydraulic installations, maintenance and repairs. Pipes, flushing and onsite servicing; can operate anywhere in the world. Pump and drainage checks. Oil purity checks. Adjustment of proportional valves. Commissioning. Checking for leaks. Tank cleaning. Checking gas levels in accumulators.

    By Group Glual based in Azpeitia, SPAIN.

  • Oxygen Services

    Developed and tested for safety. Oxygen - essential for life yet so dangerous, posing huge potential risk when utilised in industrial processes. To ensure the safety of plant and personnel, extreme caution is required to ensure that all systems used for handling oxygen are correctly specified, designed, manufactured and maintained because the ...

    By James Walker Australia Pty Ltd based in Sydney, AUSTRALIA.

  • PipingSolutions - Flare Header Piping System Rating and Design Services

    This service consists of modeling an existing or new emergency relief system including pressure relief valves and knock-out drums on the TRI*HEADER computer program. The piping system will then be evaluated by simulating a variety of blow down or relieving cases. Flow problems will be identify and a variety of possible flow solutions can be tested ...

    By PipingSolutions, Inc. based in Houston, TEXAS (USA).

  • Pressure Systems & instrumentation Services

    For years and years fluids and gasses have been used as energy carrier for realisation of motion. Oil and compressed air are best known in this field. In other less known cases, another medium, already present in the system is used, for example for the control of valves in a natural gas pipe. The service of Delta Controls in the field of pressure ...

    By Delta Controls BV / Veenstra Group based in Emmen, NETHERLANDS.

  • Leak Detection and Repair (LDAR) Services

    Provide services to refineries, chemical plants, hazardous waste facilities and others for complying with Leak Detection and Repair (LDAR).

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Repairs and Maintenance Services

    Repair and maintenance of the fittings is carried out professionally by us. It is usually cheaper and more environmentally friendly to repair a defective or non-functional fitting than to replace it with a new one.

    By BK Armaturen Buse e.K. based in Wuppertal, GERMANY.

  • Installation & Maintenance Services

    Installation Instructions: Only qualified personal, familiar with pressure relief valves should perform all installations and/or maintenance.

    By Aquatrol, Inc based in Elburn, ILLINOIS (USA).

  • Service & Support

    Tundra’s Service Department consists of trained and experienced technicians across western Canada. Unscheduled outages can cost upwards of 15 times more than scheduled downtime. Tundra’s factory-trained Service Technician Team is ready 24/7- 365 days a year to service all of your needs, reduce interruptions, and manage capital cost ...

    By Tundra Process Solutions Ltd. based in Calgary, ALBERTA (CANADA).

  • Pressure Calibration Services

    Our UKAS pressure calibration laboratory is equipped with a range of precision pressure balances, dead weight testers, digital calibrators and digital barometers enabling the company to offer pneumatic, gas, hydraulic and oxygen clean pressure gauge calibration. Our UKAS accredited pressure range covers both absolute and gauge measurement from ...

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services - Traceable and UKAS Accredited Service line

  • Reverse Engineering Services

    ItalBest Valve is proposing itself as the leading company of a new project: reverse engineering. By this definition, the Company wants to open a new way of thinking valves’ world. With this project, ItalBest Valve S.r.l. would like to start a new activity regarding especially ball valves, both trunnion and floating mounted, guaranteeing made ...

    By ItalBest Valve s.r.l based in Lonate Pozzolo, ITALY.

  • Copper, Brass & Cu Alloys Scrap Services

    It consists of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire.

    By ΑΝΑΜΕΤ SA based in Athens, GREECE. from Metal Scrap Services Service line

  • Design and Fabrication Services

    Our competence and capabilities allows SBIW to design, reverse engineer and fabricate turbine of any type and auxiliary equipment components. Typical applications are replacement, refurbishment and modification of: Runner, head cover, wicket gates, thrust and guide bearings, shift rings, stationary seals, rotating seals and shaft Seals. Pelton ...

    By SBIW Inc. based in San Ramon, CALIFORNIA (USA).

  • Maintenance Services

    Our Brisbane facilities are also fully set up to test, refurbish, set, and certify safety relief and control valves.

    By Armstrong Flow Control (AFC) based in Capalaba, AUSTRALIA.

  • Installation Services

    Filter should be installed so the 1/2' clean out is level or lower than the inlet and outlet. Vertical is best for Sand Separator filters. Do not install 1/2' clean out higher than the inlet and outlet! Install so water will flow with the arrow direction on the gray tee body. Install filter in a valve box or in a shaded area. Direct sunlight will ...

    By Action Machining Inc. based in West Bountiful, UTAH (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you