Water Consulting & Engineering Applications

23 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Consulting & Engineering ×

Soil Stabilization

by Geo Products, L.L.C. - EnviroGrid Cellular Confinement (Geocell)     based in Houston, TEXAS (USA)

Problem: Poor load-bearing soils pose a significant problem for transportation and construction needs. Unpaved areas, such as access roads, paths, parking lots, driveways, etc can be highly vulnerable to near-surface shear failure and rutting, especially in moist conditions or areas with higher expected loads. Typically, engineers bridge over weak soils with rigid structures such as thick, reinforced concrete for roads and highways. However, such techniques are prohibitively expensive and inordinately difficult to install. The poorer the quality of the sub-base and the heavier the expected loads, the greater the amount and better the quality of support required.

Mobile Sewage Treatment for Remote Locations

by Nomadic Systems     based in Langley, BRITISH COLUMBIA (CANADA)

NOMADIC™ mobile sewage treatment systems are fully customizable, pre-plumbed, pre-wired and ready to be deployed in any off-the-grid location. The versatility of our systems allows them to be shipped using any method necessary to access your remote location.

We do not limit ourselves by focusing on one specific application, we believe our technology can be used anywhere in the world where people require environmentally friendly sewage treatment.

Mobile Sewage Treatment for the Oil and Gas Industry

by Nomadic Systems     based in Langley, BRITISH COLUMBIA (CANADA)

Due to the continued growth in the oil & gas industry, we are seeing an increased demand for mobile sewage treatment solutions for oil exploration and drilling rigs in remote locations.

Industrial Engineered Plastic for the Wastewater Industry

by Diversified Plastics, Inc.     based in Missoula, MONTANA (USA)

Over the past decade, Diversified Plastics has become a leading provider of sprockets and other plastic components to the wastewater industry. This is, in part, because many treatment facilities are moving away from metal and toward plastic components.

  • Plastic components are much lighter than steel, reducing shipping costs and making them far easier and less labor-intensive to install.
  • Plastic components are as or more durable than steel and reduce friction, which lengthens the life of the mating components and also lowers energy consumption.
  • Plastic components not only cost less to purchase upfront, they reduce long-term maintenance costs.

Innovative pump technology for industrial engineering industry

by EDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KG     based in Kiel, GERMANY

Reliably delivering liquids in different states for various tasks with high efficiency – technical, economical and energy saving. EDUR have held a leading position in this field over decades.

Prevent biofouling in hulls and sea chests

by LG Sonic     based in Zoetermeer, NETHERLANDS

Prevent biofilm formation and lower fuel costs.

Biofouling control in cooling basins

by LG Sonic     based in Zoetermeer, NETHERLANDS

Prevent biofilm formation and lower bacterial counts, and chemical consumption.

DOCUPAK LLC REDUCES COOLING TOWER CHEMICAL USAGE BY A THIRD

by Scalewatcher North America Inc.     based in Oxford, PENNSYLVANIA (USA)

Docupak LLC, a full service marketing company headquartered in Alabaster, Alabama, has reduced chemical usage by a third and removed all scale from its cooling tower at its plant after installing the patented, award-winning Scalewatcher computerized, electronic water-conditioner from Scalewatcher North America. In addition there are no longer signs of algae growth on the cooling tower louvres. Founded in 1998, Docupak, the operating name of Document and Packaging Brokers Inc., develops and distributes materials for businesses nationwide. In addition to its headquarters in Alabaster, Alabama, the company also operates a further plant in Alexandria, VA and has sales offices in Atlanta, Chicago, Cincinnati, Dallas, Los Angeles, Tampa and Washington, D.C. Aware that health agencies continually draw attention to the risks of limescale and algae in cooling towers and wanting to reduce the use of chemicals in the cooling tower, Plant Manager, Anthony Kinstley decided to install the Scalewatcher electornic water-conditioner through local dealer, Al Chatham of Water Processing and Well Supply in Harpersville, Alabama. An industrial Scalewatcher was installed on to the water-feed line to the building and then a further unit was specifically fitted on to the recirculation line of the cooling tower. “Since using the system the scaling on our cooling tower has been eliminated and we currently use only a third of the original chemicals intended for the water treatment within our system”, said Anthony Kinstley. Many air conditioning and refrigeration plant systems are water-cooled. The heat generated by cooling coils is removed by water, which is passed through a water-cooling tower. These are recirculating systems, which operate at temperatures ideal for bacterial and algae growth, and have plentiful supplies of nutrients. In cooling towers, temperature, water hardness, pH, scale and corrosion are all factors, which increase the chance of biofilms, algae and Legionella colonization. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “Scalewatcher has proven itself to be highly effective. I would highly recommend this product and service without limitation,” concluded Antony Kinstley. Scalewatcher models are based on continuous research and over 25 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and are shipped throughout North America.

Mobile Sewage Treatment for the Mining Industry

by Nomadic Systems     based in Langley, BRITISH COLUMBIA (CANADA)

Mining camps are often not located in areas close to basic amenities. We specialize in providing a total mobile sewage treatment solution, allowing mining companies to focus their efforts on revenue generating activities

Monitoring engineering systems for wastewater treatment industry

by Pollution & Process Monitoring Ltd     based in Sevenoaks, UNITED KINGDOM

Sometimes an `off the shelf` water quality monitoring product is just not available and it is necessary to engineer a complete bespoke monitoring solution. System integration demands a diverse range of abilities. PPM is experienced in designing the correct suite of instrumentation combining manufactured, distributed and factored products.

Innovative pump technology for process engineering industry

by EDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KG     based in Kiel, GERMANY

Modern process engineering in different industries provides a variety of applications for EDUR pump systems. In all cases it becomes evident that the issue of energy efficiency and the required optimum design of the pump system deserve great attention.

Applications and Air Pollutants Removed for Marine Power Plants

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Control of ship diesel engine emissions to meet MARPOL requirements for particulate ash and soot, sulfur dioxide and NOx. Special compact inline stack mounted space saving designs. Both open loop arrangements using sea water or closed loop using a range of chemical solutions.  Complete system offerings.

Environment health and safety software for the government sector

by Intelex Technologies Inc.     based in Toronto, ONTARIO (CANADA)

Intelex’s environmental, health and safety and quality software solutions support government organizations around the world in their efforts to provide excellent service, ensure clean, safe drinking water, mitigate environmental impacts and exceed health and safety standards.

Groundwater Monitoring for Water Resource Management

by HERON Instruments Inc.     based in Dundas, ONTARIO (CANADA)

One of the greatest problems facing the planet is the management, conservation and equitable distribution of fresh water supplies. The fresh water sources may be lakes, rivers or ground water aquifers, most of which are now under stress.

Process Design

by Yates Environmental Services     based in Spokane, WASHINGTON (USA)

Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems • Hydrogen sulfide and odor control • Decentralized treatment systems • Process optimization / operations assistance • Conceptual and strategic water planning

Need help finding the right suppliers?

Let the XPRTs do the work for you