Only show results in Texas? Ok

Water Control Applications

  • Premium

    Hand-Held & process control water testing instrument for Deionized water testing industry

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Boilers and cooling towers

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Process cooling and industrial comfort applications solutions for machine tools industry

    HITEMA with its range of product solutions is able to grant an energy and water saving maintaining a precise an stable temperature control for the operations of welding machines, for precision machine tools, metal cleaning processes where the precise cutting oil and hydraulic fluid temperature permit high speed operations and low maintenance costs, it permits also to increase the productivity and the lifetime of the machining center.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Air pollution control for the natural gas processing industry

    The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Process cooling and industrial comfort applications solutions for automotive industry

    The production of a vehicle is complicated and includes lots of processes (cooling of machine tools, painting baths, cooling of mechanical and hydraulic components, molding machines etc..) with different kind of heat transfer, each with different range of temperatures involved.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for for Environmental industry

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Fountain solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water treatment solutions for chemical vendors industry

    ProMinent and the chemicals industry: a good combination. With metering equipment from ProMinent we can take your chemicals to the next level and make them more high-performance, more environmentally-friendly and safer. And this is something that everyone can benefit from.

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Air pollution control solution for water treatment industry

    Odor control via the use of oxidizing reagents can be effectively accomplished using the Clean Air Group, LLC counter current packed towers. Whether it is H2S, NH3, both or other odorous compounds we have the scrubber technology or absorber technology to satisfy treatment needs.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly smelling...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Water treatment solutions for paper and pulp industry

    Partner to the paper industry. ProMinent provides reliable metering components and systems for the production of paper, rounded off by the application knowledge of ProMinent engineers.

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Water treatment solutions for oil and gas industry

    "Made in Germany" for the global oil and gas industry. ProMinent`s tailored products are made in Germany. Designed as complete solutions and manufactured in-house, they are quickly ready for use (up-, mid- and downstream).

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Water treatment solutions for energy generation industry

    Powerful components for power plants. ProMinent solutions simplify everything: even complex power plant systems are optimally organised through a combination of our pumps and metering systems.

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Solutions for waste water treatment

    Very low-impact treatment for waste water. Our water treatment technology delivers thorough yet environmentally friendly waste water treatment. What`s more, with precisely metered additives and optimised processes, you also save money.

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Motion control solutions for the marine/shipping industry

    Motion control solutions for the marine/shipping industry.

    By Hilliard Corporation based in Elmira, NEW YORK (USA).

  • Premium

    Water treatment chemicals solutions for pulp and paper industry

    In the manufacturing of pulp, the raw material for paper, problems such as the piercing and ripping of paper occur due to calcium carbonate and other scales and pitch deposits (adhesives contained in wood and old paper). To prevent these problems, Kurita Water Industries offers a range of water treatment chemicals such as anti-scale agents and pitch control agents. For the paper-forming process that produces paper from pulp, we offer water treatment chemicals such as slime control agents that help improve the...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Combined sewage overflow control for wastewater treatment

    Combined sewage overflow control for wastewater treatment.

    By Process Wastewater Technologies LLC based in Rosedale, MARYLAND (USA).

  • Premium

    ADVANCEES - Formation Water Custom skid-mounted water purification equipments

    Oil and grease in formation water includes free oil, dispersed oil (small oil droplets), and emulsified oil. Oil and grease discharge, along with produced water, involves compliance with stringent regulations. Oil and grease removal methods depend on the end usage of treated water and composition of oil in the produced water. For more info contact us at sales@advancees.com

    By Advanced Equipment and Services based in Coconut Creek, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you