Water Flow (Water and Wastewater) Equipment

Showcase

EK - Model Gladiator PLUS - Enhanced Evaporation System

The Gladiator PLUS Enhanced Evaporation System installs on large wastewater ponds or lagoons that capture industrial process waters or stormwater. The Gladiator PLUS accelerates the natural evaporation phenomenon using rotary atomization to convert the wastewater into small micron droplets that ultimately turn into vapor, keeping pure water in the hydrologic ...

By Evaporation King based in Lakeland, FLORIDA (USA).

Premium

ProMinent SlimFLEX - Model 5a - Controller

The cooling tower regulator SlimFLEX 5 continuously measures and controls conductivity and controls biocide metering, keeps pipework and heat exchangers clean and prevents ...

By ProMinent GmbH based in Heidelberg, GERMANY. from Measuring, Control and Sensor Technology - Controllers Product line

Premium

OTT - Model MF pro - Meter, Portable with Case

The OTT MF pro is a magnetic-inductive flow meter designed for SxS wading rod measurements in smaller rivers and open channels. The low-maintenace system consists of a compact light-weight sensor and a robust handheld unit that reliable operates even under rough environments. Both system components are designed to be attached to conventional wading ...

By OTT HydroMet Solar Energy based in Sterling, VIRGINIA (USA). from Instruments - Hydrology - Water Discharge - Flow Product line

Premium

Campbell Scientific - Model CS475A-L - Radar Water-Level Sensor

The CS475A radar sensor monitors the water level of rivers, lakes, tidal seas, and reservoirs. The sensor is ideal for areas where submersed sensors can be damaged due to corrosion, contamination, flood-related debris, lightning, or vandalism. It emits short microwave pulses and then measures the elapsed time between the emission and return of the pulses. The elapsed time measurement is used to ...

By Campbell Scientific, Inc. based in Logan, UTAH (USA). from Water Level, Stage, and Flow Sensors Product line

Premium

ENVEA - Model MaxxFlow HTC - Massflow Measurement for Dry Bulk Solids

Contact-less and maintenance free measurement of high mass flow rates of dry bulk solids independent of pipe run. Electromagnetic flowmeter, designed to measure bulk material flows up to 300 t/h. The meter has no mechanical parts in the flow, is 100 % dustproof and erosion free thanks to the ceramic inner pipe: arbitrary mounting position (inclined/free fall), low headroom required, easy to ...

By ENVEA based in Poissy, FRANCE. from Process - Flow Measurement Product line

Premium

Siemens Fidamat - Model 6 - Continuous Gas Analyzers with Flame Ionization Detector (FID)

Gas analyzers with an FID (flame ionization detector) are well suited for continuous total hydrocarbon measurement. The measurement is not component specific but substance-class specific. In the first approximation, the measurement result is proportional to the number of C atoms in the respective ...

By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA). from Continuous Gas Analytics - Series 6 Product line

Premium

SprayCannon - Model 15/25/40-W - Wall-Mounted Dust Cleaning Fog Machine

Every dust problem is unique. That's why we work closely with our customers to find the right solution. We specialize in machines made to measure. Each dust problem needs a specific ...

By MB Dustcontrol B.V. based in Voorschoten, NETHERLANDS. from Wall-Mounted SprayCannon Product line

Premium

Plugco - Model FTP-P - Flow Through Pillow Packer

Flexible Pillow Packer is a foldable double-layer reinforced rubber used to repair large-sized pipes while the access point is limited. Generally, it is used for cylindrical shape ...

By PlugCo based in Corum, TURKEY. from Pipe Repair Packers - Pipe Patch Repair Models Product line

Premium

F&J - Model MRB200H3E - Tritium Collection System (220 - 240 VAC)

The Model MRB200H3E Tritium collection system consists of a three 20 ml vial bubbler train for collection of tritium in water vapor. A diaphragm pump with an automatic flow control mechanism utilizing the F&J digital flowmeter system is provided. Typical flow range is 75 to 200 sccm (other flow range options are available). Real-time data download is available through the RS232 port. An ...

By F&J SPECIALTY PRODUCTS, INC. based in Ocala, FLORIDA (USA). from Air Samplers - Tritium and Carbon 14 Collection Systems Product line

Premium

NIVUS - Model RM 20X - Rain Gauge

For detection of precipitation volumes. Rain gauge for detection of precipitation volumes and for GPRS transmission to D2W Internetportal with comprehensive options for evaluation, verification and output of ...

By NIVUS GmbH based in Eppingen, GERMANY. from Accessories - Miscellaneous Product line

Premium

Nordic Water - Mill Scale Separation

Mill scale forms during steel production. It is a thin oxide coating that is created when steel is hot-rolled. When the steel is cooled down with water during the rolling process, the mill scale breaks off. The cooling water is re-used over and over again, which means that mill scale and oil residue particles need to be separated off. Mill scale often also contains valuable alloying elements such ...

By Nordic Water Products AB based in Mölndal, SWEDEN. from Process Solutions - Industrial Product line

Premium

Peak Scientific - Model NG5000 - Ultra High Purity Nitrogen Generators

The NG5000 delivers ultra high purity nitrogen at trace detection limits through Pressure Swing Adsorption technology at flows of up to 5 L/min for GC, DSC and DMA applications as well as other laboratory applications requiring up to 5L/min of ultra high purity nitrogen. This generator requires a high quality source of in-house air to supply the unit. For labs without this air supply the ...

By PEAK Scientific Instruments Ltd based in Inchinnan, UNITED KINGDOM. from Nitrogen Gas Generators Product line

Premium

JCT - Model JCS-100 - Sample Gas Cooler (Compressor)

Applications: For extractive gas analysis. For emission and process monitoring. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...

By JCT Analysentechnik GmbH based in Wiener Neustadt, AUSTRIA. from Sample Gas Coolers Product line

Premium

SprayCannon - Model 40 SS - Self-Supporting Dust Control Machine

Self-Supporting SprayCannon for dust control in both inside and outside ...

By MB Dustcontrol B.V. based in Voorschoten, NETHERLANDS. from Self-Supporting SprayCannon Product line

Premium

OSi - Model OFS-2000 - Emissions and Air Flow Sensor

OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of the process. The OFS uses our EPA Method 14 approved optical scintillation technology. The optical scintillation technique relies on ...

By Optical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA). from Emissions Flow Monitoring Product line

Premium

Dosatron - Model D3WL3000 NSF - Certified Dosing Pump for Drinking Water

The D3WL-NSF range of dispensers is certified NSF/ANSI/CAN 61: Drinking Water System Components - Health Effects NSF (American approval for all equipment in contact with water intended for human consumption). It meets the dosing requirements for flow rates from 10 to 3,000 ...

By Dosatron International based in Tresses, FRANCE. from Water Line Product line

Premium

Cytiva Whatman - Model TCLP - Testing Filters

GE’s Whatman TCLP test filters are acid-treated with low metal content. They support TCLP testing by providing accurate information about TCLP limits to ensure the best possible disposal plan can be put into ...

By Cytiva based in Marlborough, MASSACHUSETTS (USA). from Laboratory Filtration - Industry Specific Filters Product line

Premium

ENEXIO - 2H Fills and Nozzles for Cross-Flow Cooling Towers

Optimal heat transfer properties – low pressure drop; Generally, every cross fluted fill could be cut to be installed in a cross-flow cooling tower. Such a fill, however, would not perfectly fit the requirements; we therefore developed a special range of fill for this type of tower (FX12.12 or KSN with a drift eliminator section KSA and air inlet louvre section ...

By Enexio Water Technologies GmbH based in Hürth, GERMANY. from Water Technologies - Cooling Tower Components Product line

Premium

Sauereisen - Model No. F-370 - Catalyzed Hydrophobic Polyurethane Liquid

Sauereisen No. F-370 is a catalyzed hydrophobic polyurethane liquid. No. F-370 expands when it meets any source of water or moisture before curing. No. F-370 adheres tenaciously to practically any substrate - wet or dry. Grout No. F-370 is used to stop leakage through cracked or honeycombed concrete, voids, expansion joints and pipe intrusions. Applied by injection, the grout is commonly ...

By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - Accessory Materials - Inflow & Infiltration Product line

Premium

NIVUS - Model NIS-V200 - Pipe Flow Sensors

For use in pipelines. For full pipes. Ideal for flow measurement of process water and dirty water lines as well as hydropower ...

By NIVUS GmbH based in Eppingen, GERMANY. from Flow Measurement - Clean and Slightly Polluted Media - Flow Sensors Product line