Only show results in Michigan? Ok

Water Hammer equipment for Water and Wastewater

  • Premium

    Model IM-SR - Quick Relief Valve to Avoid Water Hammer

    IM-SR Quick Relief Valve to Avoid Water Hammer.

    By TECNIDRO Srl based in Genova, ITALY. from Quick Relief Valve to Avoid Water Hammer Product line

  • Pulsation Dampener

    Absorbs pressure pulsations in piping. Reduces high liquid accelerations and inertial forces in suction and in discharge line. Avoids excessive pressure loss and damaging water hammer. Protects chemical feed system and metering pump from damage.

    By Lutz-JESCO America Corp. based in Rochester, NEW YORK (USA). from Pulsation Dampener Product line

  • 101MDT

    Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • 103MBP

    Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • 103MDT

    Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • 105MAP

    Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • 105MBP

    Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • 105MDT

    Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • 105MHT

    Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • 107MAP

    Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • 109MDT

    Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • PULSCO - Model CST-750 - Air-Over-Water Surge Control System

    PULSCO’s Hydropneumatic Surge Control Systems, commonly known as surge arrestors or shock traps, are designed to eliminate damaging shock waves and pressure transients in fluid transporting systems. These pressure transients often are called water hammer, surge or shock.

    By PULSCO Inc. based in Santa Ana, CALIFORNIA (USA). from Air-Over-Water Surge Control System Product line

  • Model 247/D - High Pressure Manual Drip Trap

    Condensate removal from gas piping systems is necessary to protect piping and equipment from possible damage caused by corrosion or water hammer. In addition, water lying in low spots in piping can restrict gas flow resulting in increased pressure drop within the system. In addition to all low spots, Varec Biogas drip traps should be installed ...

    By Varec Biogas based in Huntington Beach, CALIFORNIA (USA). from High Pressure Manual Drip Trap Product line

  • Scepter - Direct Injection Steam Tank Heater

    This versatile series of steam heaters is designed for the direct injection of steam into tanks for heating water compatible products in a quiet, vibration free, and 100% efficient fashion. In addition the tank heater develops a strong stirring action to help keep any solids or particulates in suspension. This stirring action also helps to produce ...

    By Komax Systems, Inc. based in Huntington Beach, CALIFORNIA (USA). from Direct Injection Steam Tank Heater Product line

  • Model 05 - Mini Water Hammer Arrestors

    Series 05 Mini Water Hammer Arrestors are used in light commercial and residential applications to control water pressure shock and prevent water hammer conditions. Series 05 is factory air charged and is not rechargeable. It can be installed in new or existing plumbing systems in concealed locations with a standard pipe tee in any angle. Series ...

    By Watts Regulator Company based in Dunnellon, FLORIDA (USA). from Mini Water Hammer Arrestors Product line

  • Model CS 35 - Proportional Lift Safety Valve

    Respect to normal ''pop action'' safety valves, these particular valves open progressively in a proportional way thanks to a system of internal cages. This particular action prevents the water-hammer effect, very dangerous for the plants. The CS35 are therefore ideal for very viscous liquids (e.g. oil ISO VG 32 and 46) and this makes them very ...

    By Carraro S.r.l. based in Segrate, ITALY. from Proportional Lift Safety Valve Product line

  • Model HRB Series - Landscape Sprinkler Valve

    You want a valve you can install and forget – one that goes on working flawlessly year after year even in pressures up to 200 PSI. That’s why we built the HRB series valves with a durable glass-filled nylon and a fabric-reinforced diaphragm: to ensure toughness plus reliable, long- lasting performance. The diaphragm spring ...

    By HYDRO-RAIN based in North Salt Lake, UTAH (USA). from Landscape Sprinkler Valve Product line

  • Maass - Cycle Slayer Pump Stop Valves

    Controls pump cycling, reducing amount of electricity used by the pump. Reduces the size of pressure tank needed. Adjustable bypass valves easily control run-time. Eliminates early pump failure and reduces pump cycling, increasing the life of the pump. Prevents and controls water hammer. See Product Catalog for details about the Plastic Fixed ...

    By MAASS Midwest Manufacturing Inc. based in Huntley, ILLINOIS (USA).

  • WTR - Flexible Disc Check Valves

    Swing Flex Valves are designed for tough pumping applications with high discharge pressures in which reverse flows could cause excessive surging, severe slamming and water hammer. The valve is designed with a 45° angle valve seat and a short disc stroke of 35° to achieve rapid closure, and positive seating at high or low pressures. This ...

    By Water Technology Resources based in Bloomington, MINNESOTA (USA).

  • Air Valves

    We engineer and produce several kinds of air valves, based on different operating principles : air release valves,  vacuum breakers,  combination air valves.

    By F.Nencini Srl based in Colle di Val d’Elsa (SI), ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you