Water Infiltration equipment for Water and Wastewater

The StormTank Module 25 Series is the flagship product of the StormTank brand, offering a stormwater management solution rated for extreme load applications. It can be sized and configured to fit nearly any site layout. With up to 97% void space and a stackable design, the system minimizes installation footprint while allowing for management of ...

By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA). from Stormwater Management Product line

The StormTank Pack provides a cost-effective alternative for non-load-bearing applications and is commonly used under landscaped areas. Its design is perfect for infiltration and integration in bioretention and rainwater collection applications.

By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA). from Stormwater Management Product line

Automated capture and treatment of large combined sewer overflows (CSOs) in a compact structure. Minimal head loss, primary settling, skimming, fine screening, and disinfection–all in one unit.

By Process Wastewater Technologies LLC based in Rosedale, MARYLAND (USA). from CSO/SSO Products Product line

RestoKrete® SubstrateResurfacer F-121 by Sauereisen is a high strength substrate repair material designed for an economical repair where deterioration is greater than small voids, bug holes and irregularities in concrete or brick substrates. F-121 repair material is designed as a water resistant barrier to aid in the prevention of inflow ...

By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - Substrate Repair Materials Product line

The Stevens Tempe Cell System is a complete kit used to determine soil water holding characteristics, validate the accuracy of a soil moisture sensor, and determine volumetric soil moisture gravimetrically. The Stevens Tempe Cell System can be used to develop a soil-specific calibration for the HydraProbe soil sensor, achieving the highest ...

By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA). from Accessories & Misc. Product line

Decentralised, Tailor-Made Solutions for Stormwater Infiltration And Retention: GEOdek infiltration boxes store excess stormwater and release it afterwards. Made from Polypropylene, they exhibit exceptional strength and are resistant to all chemicals normally found below ground. GEOdek can be used under sealed surfaces such as streets and parking ...

By ENEXIO Water Technologies GmbH based in Hürth, GERMANY. from Water Technologies - Infiltration Boxes Product line

New fast-setting SewerGard enables limited downtime. Sauereisen SewerGard No. 210FS is a fast-setting epoxy material for use in municipal wastewater environments. This lining protects concrete surfaces from chemical attack and physical abuse. It is particularly useful for protection of manhole benches, inverts and other structures subject to very ...

By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - SewerGard - Municipal Wastewater Product line

For measurements under difficult measurement conditions. Unrivalled light weight and short mounting length, unit can be installed by only one person. High accurate measurement in full pipes. Versatile use in pipes with various diameters

By NIVUS GmbH based in Eppingen, GERMANY. from Accessories - Miscellaneous Product line

Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom

By NIVUS GmbH based in Eppingen, GERMANY. from Flow Measurement - Polluted Media - Flow Sensors Product line

This self-priming (up to a depth of 6 meter) centrifugal pump is used primarily for (fast) purging or emptying of monitoring wells and bore holes. Other applications are pumping water for irrigation, drinking water for cattle, etc. The pump has a quiet, reliable starting, economical fourstroke engine running on ordinary or unleaded petrol. The ...

By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Groundwater Samplers Product line

For detection of precipitation volumes. Rain gauge for detection of precipitation volumes and for GPRS transmission to D2W Internetportal with comprehensive options for evaluation, verification and output of alarms.

By NIVUS GmbH based in Eppingen, GERMANY. from Accessories - Miscellaneous Product line

Sauereisen RestoKrete No. 208 is a substrate repair material and water resistant barrier for prevention of inflow and infiltration in concrete or brick substrates. RestoKrete™ No. 208 is an epoxy-based mortar specified for substrate repair where structural integrity needs to be restored. RestoKrete No. 208 is designed to fill voids, ...

By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - Substrate Repair Materials Product line

Sauereisen SewerGard Industrial No. 210TN is an aggregate-filled, NovolaK epoxy material. This lining system is specifically designed to protect concrete surfaces of industrial wastewater treatment structures and collection systems from chemical attack and physical abuse. SewerGard No. 210TN's non-sagging application properties permit economical ...

By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - SewerGard - Industrial Wastewater Product line

For measurement places with various geometries. For connection to NivuFlow 650 transmitters. High accurate flow measurement based on the transit time method for open channels and waters, mainly process water channels and natural water bodies.

By NIVUS GmbH based in Eppingen, GERMANY. from Flow Measurement - Clean and Slightly Polluted Media - Flow Sensors Product line

Dürr Megtec provides a comprehensive turnkey approach for producing battery electrode coated materials. Our capabilities cover both ends of the production line, as well as everything in between. We provide systems for raw material handling, slurry mixing and fluid delivery, web handling, coating and drying, solvent recovery and purification, ...

By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA). from Energy Storage Product line

Sauereisen SewerSeal F-170 is a cementitious water infiltration barrier for use in wastewater collection systems. The product combines 100% calcium aluminate cement with finely graded inert aggregate, thereby offering notable corrosion resistance to mild acids and alkalies. SewerSeal commonly seals and resurfaces deteriorated masonry and concrete ...

By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - Substrate Repair Materials Product line

Sauereisen SewerGard No. 210 is an aggregate-filled epoxy material. This lining system is specifically designed to protect concrete surfaces of municipal wastewater treatment structures and collection systems from chemical attack and physical abuse. No. 210's nonsagging application properties permit economical repair and protection of vertical, ...

By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - SewerGard - Municipal Wastewater Product line

Sauereisen Manhole ChimneySeal F-88 is an elastomeric lining composed of fiber-reinforced, asphalt-modified urethane. ChimneySeal is used as a chemical-resistant membrane or gasket seal for the prevention of water infiltration. Manhole ChimneySeal has excellent adhesion to most substrates. As a high solids elastomer, it is recommended when ...

By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - Accessory Materials - Inflow & Infiltration Product line

Jellyfish Filter is a stormwater quality treatment technology featuring pretreatment and membrane filtration in a compact stand-alone system. Jellyfish Filter removes floatables, trash, oil, debris, TSS, fine silt-sized particles, and a high percentage of particulate-bound pollutants; including phosphorus and nitrogen, metals and hydrocarbons.

By Imbrium Systems Inc. based in Whitby, ONTARIO (CANADA). from Other Products Product line

PROPADRY is a revolutionary product line that Propagroup developed to prevent humidity in closed spaces and packages, thus protecting the quality of your goods. It is well known that moisture inside freight containers is one of the main causes of product damage during transportation and storage. In closed environments, in fact,  humidity ...

By Propa Group based in Rivoli (Turin), ITALY. from Humidity Protection and Stabilization, Temperature Monitoring Product line