Water Pollution Applications

13 Results found
Only show results in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Pollution ×

Coating and Laminating

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

Pollutant Decontamination for the Wastewater Treatment Industry

by NANO IRON s.r.o.     based in Rajhrad, CZECH REPUBLIC

All described properties of Fe(0) nanoparticles can be even used for decomposition of pollutants contained in the waste water, mainly for treatment of industrial sewage and hutch water. The usage of nanoiron can represent a significant qualitative step in the classical technologies of water treatment including drinking water. The extremely reactive iron nanoparticles thus offer a possibility to solve long-lasting problems with a high content of uranium and arsenic in a variety of localities in the Central Europe. They can be also used for a reduction of the content of heavy metals, nitrates and phosphates in the drinking water. Just these inorganic pollutants, which are hardly or expensively removed by standard technologies, are effectively removed by Fe(0) nanoparticles. 

Water systems for health sector

by Magnation Water Technologies - Magnation Corporation     based in Oakland, CALIFORNIA (USA)

The MAGNATION H2O Energizer Personal Use Funnel makes any water more biofriendly to your cells. Magnetic resonance reduces and restructures oversized water molecule clusters into smaller units, making them more bioavailable to your body`s cells due to easier passage into the cell structure. This fuller hydration, which delivers more oxygen and nutrients while also removing toxins at an accelerated rate, allows the body to operate at a higher state of efficiency and balanced health. Magnetizing your water elevates the quality of your hydration substantially.

Environmental Monitoring - Water Screening for Pollutants - Pesticide Screening

by Biosensor     based in Formello, ITALY

Water screening for the detection of pollutants owning to large classes of chemical compounds such as triazine, fenylurea, diazine and phenolic pesticides can be performed. The presence of environmental pollutants can be determined utilizing biological materials such as photosynthetic biomediators (Plants, Algae, Cyanobacteria) and enzymes (e.g. Laccase or Tyrosinase). AMPBIO-ITO Light provides amperometric measurements performed on electro-active biological material suspended, deposited or grown on an Indium Tin Oxide (ITO) electrode, before and after the injection of the analyte under test. OPTICBIO-Multicell Survival optical is based on multicell arrays for biological material survival/storage and fluorescence measurement for the control of the physiological activity.

Applications and Air Pollutants Removed in Municipal Water Treatment Plants

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Applications include: emergency chlorine scrubber systems for cylinder storage area. Removal of powdered carbon particulate emitted from storage silo vents during the loading operation. 

Air pollution control for the natural gas processing industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.

Wastewater solutions for the industrial effluent pollution management

by Real Tech Inc.     based in Whitby, ONTARIO (CANADA)

Problem: Industrial manufacturers face stringent regulations for discharging wastewater to the environment and municipal sewer systems. Biochemical Oxygen Demand (BOD) is a primary concern for many discharge limits, as wastewaters high in BOD can have adverse impacts on the aquatic environments by leading to oxygen depletion. In some cases, as a means to supplement BOD, it is also desirable to monitor chemical oxygen demand (COD) of industrial effluents. Both of these tests, are time and labour intensive reducing the frequency at which they can be measured for a given effluent.

Organic Micro-Pollutants Removal

by Arvia Technology     based in Runcorn, UNITED KINGDOM

Organic Micro-pollutants are low and trace levels of synthetic organic substances released in water through human activity. They can be found in industrial, agricultural and domestic wastewater streams. Some of the most difficult-to-treat wastewater contains micro-pollutants such as persistent organic pollutants (POPs), herbicides and pesticides, personal care products (PCPs), toxic chemicals, carcinogenic and endocrine disruptive compounds (EDCs), and emerging contaminants.

Iron and Steel

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

SoniCool™ Evaporative Gas Cooling & Conditioning uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, SoniCool™ helps electrostatic precipitators. The water spray completely evaporates while cooling gases. There is no free water and no troublesome deposits in ducts, towers or hoppers. Turbotak rugged nozzles are made to the exact requirement, and ideally suited to the harsh conditions in the steel manufacturing process while still producing ultra-fine sprays, with precise control of dropsize and spray coverage.

Water treatment solutions for emergency water supply

by Lenntech Water Treatment     based in Delft, NETHERLANDS

Lenntech can offer containerized drinking water system, skid mounted units and trailer built solutions to meet any local requirements for fast shipment and flexible application use in the most rural areas. Lenntech will be happy to assist any NGO* and other organisations operating in acute relief work in their immediate needs for emergency situations and natural disasters.

Continuous Monitoring of Nitrates and Other Water Quality Parameters

by Hanna Instruments     based in Woonsocket, RHODE ISLAND (USA)

Nitrate is one of the most important parameters in assessing surface and ground water quality. Nitrates are naturally present in surface and ground waters in low concentrations, but are harmful to humans and livestock and cause aquatic ecosystem degradation in high concentrations. Nitrates enter the environment as human-induced pollution from a variety of sources, but the largest source is from agricultural fertilizer runoff . Other sources include wastewater treatment discharge, septic systems, and from pet waste. Nitrate is highly soluble in water and therefore readily leaches into water sources, whereas other human associated pollutants, such as phosphates and ammonia, are not transported as easily. This ability to be quickly transported into ground and natural waters such as drinking water wells, aquifers, reservoirs, lakes, and streams, coupled with its health and environmental implications make nitrate pollution and monitoring of major concern.

Water Testing for Automatic Rinse Tank Controls

by Myron L Company     based in Carlsbad, CALIFORNIA (USA)

Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have all encouraged many manufacturers and platers to invest in automatic rinse tank control systems. Many platers using automatic control systems for the first time are pleased to discover a reduction in water usage of up to 80%.

Need help finding the right suppliers?

Let the XPRTs do the work for you