Water Purification Applications

14 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Purification ×

Water systems for health sector

by Magnation Water Technologies - Magnation Corporation     based in Oakland, CALIFORNIA (USA)

The MAGNATION H2O Energizer Personal Use Funnel makes any water more biofriendly to your cells. Magnetic resonance reduces and restructures oversized water molecule clusters into smaller units, making them more bioavailable to your body`s cells due to easier passage into the cell structure. This fuller hydration, which delivers more oxygen and nutrients while also removing toxins at an accelerated rate, allows the body to operate at a higher state of efficiency and balanced health. Magnetizing your water elevates the quality of your hydration substantially.

Water quality monitoring systems for high water purifier industry

by SWAN Analytische Instrumente AG     based in Hinwil, SWITZERLAND

The monitoring of “Ultra Pure Water” or “High Purity Water” requires the lowest possible detection limits for process analyzers. Resistivity is often around 18 MΩ. Dedicated instruments can detect infinitely small amounts (ppt e.g. parts per trillion) of ions.

Activated Carbon Filtration for the Water Filtration Industry

by General Carbon Corp.     based in Paterson, NEW JERSEY (USA)

General Carbon carries a complete line of activated carbon made from coal, coconut shell and wood for most liquid phase applications.  These include acid washed activated carbon for drinking water and food grade applications as well as products suitable for waste water remediation, decolorization applications, chemical and pharmaceutical purification. Additionally, our specialty medias are best for the treatment of non-emulsified oils and heavy metals. Our stock of activated carbon for liquid phase applications are all NSF certified, meaning that they are approved for treatment of food grade applications.


Advanced water purification technologies for power generation sector

by SnowPure Water Technologies     based in San Clemente, CALIFORNIA (USA)

SnowPure has been providing EDI technology to the power plant market since 2002. Power plants around the globe are utilizing our Electropure EDI including locations in the United States, Central America, Europe, the Middle East, and China. With the introduction of our higher-capacity EXL product we are now able to serve a greater share of the power plant market including larger installations.

Coating and Laminating

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

Pure drinking water solutions for dental offices

by Pure & Secure, LLC.     based in Lincoln, NEBRASKA (USA)

Pure Water premium water distillers allow dentists to take control of their own supply of distilled water so they can ensure patient safety and protect their expensive dental equipment. Distilled water is water that has been boiled, sterilized and purified. Distilled water is an important key in preventing bacteria and biofilm build up in your water lines so you can provide a safe water supply for your patients. Pure distilled water also allows for optimum operation, reduced maintenance and increased lifespan for your autoclaves.

Industrial and commercial water filtration for process water

by Hydro-Gen Engineering Ltd     based in Widnes, UNITED KINGDOM

Filtration for Process Water is a widely used term and has a great number of uses dependent on the operation. Filtration for process water or water purification is a process where any undesirable contaminants are removed from the water to ensure it’s suitable for its intended use. The filtrat0ion of process water does not always have to be for drinking water for humans but can also refer to water purification for the use of industrial or commercial applications in a variety of industries include pharmaceutical, chemical, Paper and Textiles, Steel,  Food and Beverage, Plastics, Automotive and many more.

Advanced water purification technologies for semiconductor and electronics sector

by SnowPure Water Technologies     based in San Clemente, CALIFORNIA (USA)

High-technology industries use ultrapure water in their manufacturing. SnowPure`s components help sell pure water systems to semiconductor, electronics, solar panel, hard disk drive, glass lens, and flat panel display industries. These industries often require “ppt” (part-per-trillion) level impurities. EDI and UV-TOC are key technologies in these systems.

Using evaporation to dewater Reverse Osmosis reject waste streams

by ENCON Evaporators     based in Hooksett, NEW HAMPSHIRE (USA)

Reverse Osmosis (RO) technology has been used for years in various industries to separate dissolved solids from water by forcing the water through a semi-permeable membrane. RO is also commonly used to purify drinking water and desalinate seawater to yield potable water. The water and other molecules with lower molecular weight (specific weight of molecules allowed to pass through is dependent on the selected membrane) pass through the micropores in the membrane, yielding a purified water stream called the permeate. Larger molecules are retained by the membrane as well as a portion of the water that does not pass through the membrane. This concentrated stream is called the concentrate or RO reject.

Solutions for industrial wastewater treatment sector

by Filtronics, Incorporated     based in Anaheim, CALIFORNIA (USA)

Our industrial wastewater treatment services are used by companies in a variety of industries, and our reputation as a go-to company for wastewater treatment continues to grow. We offer affordable and efficient water filtration services, and as a manufacturer and wastewater equipment supplier of water purification equipment we’ll provide the options that work best for iron and manganese removal, arsenic removal and all your individual needs. Industrial, manufacturing, mining, semi conductor and petroleum companies represent just a few of the industries we help, and our clients include those who need city/municipal water treatment as well.

Process Analytics - Water Purification (THORNTON)

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.

Advanced water purification technologies for pharmaceutical, medical, & laboratory sector

by SnowPure Water Technologies     based in San Clemente, CALIFORNIA (USA)

SnowPure has been providing EDI technology to the pharmaceutical and medical markets since 1997. We have installations in over 47 counties including the United States, Canada, South America, India, Europe, Japan, China and Southeast Asia.

Pure drinking water solutions for tea & coffee shops

by Pure & Secure, LLC.     based in Lincoln, NEBRASKA (USA)

A CUP OF TEA IS OVER 99% WATER, so is it any surprise that the quality of water that you use makes such a huge difference in the taste, appearance and smell of your beverage? By using fresh, purified water you are ensuring a consistent, excellent tasting product every time. Your customers will be amazed and will not want to go anywhere else, especially after they learn that it’s healthier too. An added benefit is ice tea that stays fresh much longer as well as greatly reduced maintenance on your machines. Our systems provide the best water for making tea and coffee, they are completely automatic, waste hardly any water and are easy to maintain.

Power-independent flow measurement with GPRS

by NIVUS GmbH     based in Eppingen, GERMANY

In a pit water purification system it was necessary to detect the discharge volumes. The operator wanted a regular and automatic transmission of readings. On the selected measurement place no mains power connection was available. Due to the risk of vandalism, it was not planned to install a switching cabinet. See the NIVUS solution for this measurement task here.

Need help finding the right suppliers?

Let the XPRTs do the work for you