Only show results available in Virginia? Ok

Air Purification Applications

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Extraction of many emission sources in extensive factory premises

    CTP achieved the continuous and individual ventilation of every work station and overall compliance with statutory limits, as well as the production of usable steam as a by-product of the excess heat.

  • Premium

    Industrial air pollution control for the oil and gas

    Few industries attract the attention of the public as does the oil & gas industry with its related strategic products (basic materials for the chemical, pharmaceutical, varnish and cosmetics industries). The bringing of oil and gas from their original sources to the consumer, into their final forms, represents one of the most complex chains in the quest to add value to raw materials.

  • Premium

    Industrial air pollution control for the recycling and waste management

    Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

  • Premium

    Industrial air pollution control for the food industry

    Quality of life and well-being are, more than ever, important issues for consumers. The `wellness` concept has changed the food industry: Today, all food manufacturers are committed to increasing the nutritional value of their products, while constantly improving the taste. Their innovations require continuously inventive solutions in air pollution control.

  • Premium

    Air purification & filtration solutions for the disaster and epidemic response industry

    Anywhere there is a large gathering of people, respiratory infections can be acquired due to exposure to airborne pathogenic microorganisms. To help prevent the spread of diseases the Center for Disease Control (CDC) recommends that potential problem areas be isolated and the air purified by portable, HEPA air filtration equipment. OmniAire and OmniAire PAC portable HEPA air filtration machines provide a clean air supply necessary to protect the public in gathering areas such as schools, emergency shelters or temporary healthcare facilities.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Air filter solutions for the home appliances

    Home Appliances (Range Hood, Refrigerators, Air conditioning, household air purification, coffee machines etc…).

    By Airdot Environmental Technologies Ltd based in Foshan City, CHINA.

  • Premium

    Air purification & filtration solutions for the healthcare & Lab industry

    The OmniAire HEPA negative air machines and OmniAire PAC Portable Air Cleaners can be used to create positive and negative pressure isolation rooms, first response areas, increase number of air changes per hour (ACH) and to purify the air in gathering areas.. Our machines are equipped with HEPA filters, UV-C germicidal lights and an optional PEROx, a Hydro-Peroxide air purifier module for the highest degree of purification of air and surrounding surfaces. To monitor the patients room pressure relative to pressure in corridors to prevent any cross-contamination, the Watchman differential pressure monitor or Omniguard 4 differential pressure recorder can be used.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Air purification & filtration solutions for the flood & fire restorations industry

    Keeping up with Best Practices: Restoring structures after floods and fires is a constantly evolving industry.  In addition to keeping up with industry best practices for health and safety of both the contractors and the building residents post restoration, it is also important to be working with modern and reliable restoration equipment. Utilizing Omnitec and OmniAire products will allow you to take advantage of the latest best practice methods with equipment you know will work reliably and safely.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Air filtration and gas purification solutions for municipal

    There are ever more uses of water in human activities that require its subsequent purification. Of this, treating this water in waste water treatment plants (WWTP) before releasing it into the ecosystem is in rising demand. Additionally, there is also an increasing need to treat solid waste in rubbish tips to minimise environment impact in this process.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Premium

    Air filtration and gas purification solutions for industries

    Within the industrial sector there are specific installations which should pay maximum attention to the protection of their control rooms against corrosion. This is because their activities generate highly corrosive gasses which need to be eliminated in case they affect the functioning of critical electrical equipment. This corrosion compromises the efficiency and safety and can affect the production process itself.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Premium

    Demolition and Construction Projects

    Demolition and construction projects release a combination of dust and bio-contaminants which are irritating and potentially harmful. The dust generated during these projects must be contained and captured. Depending on the risk assessment, HEPA air scrubbers can be used to purify air at a work area or negative pressure containment. HEPA negative air machines can be used to prevent the spread of dust and other contaminates to the outside area. The air filtration equipment, pressure monitors, and purifiers for bio-contaminants are briefly described below with interactive links to more detailed information.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Special orders for air purification equipment

    We are able to offer custom solutions for air purification and odor control.

    By International Ozone Technologies Group, Inc. based in Delray Beach, FLORIDA (USA).

  • Disaster Restoration and Cleanup

    Total Zone Ozone Generators and Titan Hydroxyl Generators are used by restoration and remediation professionals to help bring properties back to normal after a disaster. Ozone Generators and Hydroxyl Generators are used to purify the air and eliminate odors.

    By International Ozone Technologies Group, Inc. based in Delray Beach, FLORIDA (USA).

  • AIR PURIFICATION

    Citto Activated Carbon 'Air Series' offers a range of standard, impregnated, and specialized activated carbon products for a wide spectrum of air purification applications. The dynamic product array of the Citto Activated Carbon 'Air Series' is developed to meet stringent emission control regulations as well as safety standards for emerging respiratory technologies effectively removing nuisance odors, volatile organics, and hazardous chemicals from air and gas streams.

    By Citto Corporation based in TORONTO, ONTARIO (CANADA).

  • Atmospheric Water Generators

    WaterMicronWorld, Ltd. is engaged in the research and development, manufacturing, marketing, and worldwide distribution of atmospheric water generators, filtration, ionization, and purification devices and chemicals. The Company’s various products include Atmospheric Water Generators, the WaterMicronWorld™ (AWG-30H/O Home or Office machine) and an extensive line of C-Series industrial grade Atmospheric Water Generators capable of producing 200,250, 500, 1000, 3000, and up to 5000 liters per day of pure fresh drinking water. For more information on WaterMicronWorld, Ltd., please visit our website at: www.watermicronworld.com WaterMicronWorld, Ltd utilizes a revolutionary AWG (Atmospheric Water Generation) technology to produce safe and drinkable water. AWG refers to the technology of extracting and producing purified drinking water from the humidity present in the air. To produce pure water, it requires no plumbing or any type of external water source.

  • Bio-Contaminant Control

    Microbes and bio-contaminants are pollutants such as bacteria, germs, and virus. All are small in size and usually microscopic, yet they have an amazing ability to do damage to all living organisms including plants and humans. When dealing with medical-grade and food products it is important to maintain the highest levels of sanitation possible. Many everyday illnesses are caused by viruses like the common cold or the flu. AgriAir purifiers will destroy 99.99% of airborne and surface bio-contamination helping to protect potentially vulnerable patients from dangerous microbes. In this new era of exponentially expanding plant pathogens affecting indoor crops, Hydroperoxide generators built into the AgriAir system are the answer to concerns that the airborne environment stays as sterile as possible. IHP technology destroys microbes, pathogens, and virus by changing their molecular structure and rendering them harmless.

    By AgriAir Equipment - a brand by Omnitec Design based in Mukilteo, WASHINGTON (USA).

  • Independent particle characterization services for environmental industries

    Particle size, particle concentration and other physical characterization analyses are critical to many environmental applications. Regulatory agencies in the environmental sphere demand strict compliance to standards and discharge regulations. Physical testing of samples for parameters such as particle size and concentration can give insight to the process control engineer on how effective and compliant a discharge handling system is operating. Particulate loading from both air emissions and waste water discharge are monitored in many industry sectors and PTL testing provides valuable supporting data in this monitoring process.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Ozone Generators and Hydroxyl Generators

    Ozone Generators and Hydroxyls Generators are used for odor elimination, odor control, air purification and to improve indoor air quality. Applications include hospitals, doctors offices, labs, waiting rooms, gyms, locker rooms, restoration clean up, mold remediation, bio-hazard cleanup, and many more. Our equipment will remove odors associated with smoke, household/cooking, mold, mildew, pets, off gassing, VOC, decomposition, and others.

    By International Ozone Technologies Group, Inc. based in Delray Beach, FLORIDA (USA).

  • Innovative Pump Technology for Water and Wastewater Treatment

    EDUR pumps have been used preferentially in municipal and industrial water supply and water treatment for decades. Traditionally the reasons are the sturdiness and the long service life of our pumps and the special capability of some models for transporting liquid-gas mixtures.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you