Only show results available in Virginia? Ok

Air & Climate Applications

  • Premium

    odor control for asphalt

    Control Asphalt Odors Naturally: The production of hot mix paving asphalt generates odors that can be strong, persistent, and a nuisance to employees and neighbors alike. Controlling and abating these odors can be a challenge.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with emission capture, control and compliance hurdles that composite and carbon fiber producers face. We specifically address the needs of our carbon fiber customers with proprietary oxidizer designs for furnace and oven emissions. Our systems are recognized for energy efficient operation and destruction capabilities by the U.S. Federal Government at their Oak Ridge National Laboratories (ORNL). Anguil continues to help producers drive down energy consumption and emission output through our participation in The Beacon, an initiative at the forefront of green manufacturing practices for fiber production.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Industrial air pollution control for the building materials, cement and lime

    One of the oldest industry sectors, the construction materials industry has developed a broad range of products that is constantly adapting to the state of technology and architecture: Concrete, thermal and moisture protection, masonry, plastics, composite materials and finishes, are all used in the erection of buildings and structures, and also as auxiliary materials on construction sites.

  • Premium

    Waste recovery for construction industry

    Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land remediation through to the treatment of APCs from incineration as well as the treatment of asbestos.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    High quality gas sensor solutions for building and IAQ

    Precise measurement of air quality. The carbon dioxide content of room air gives a measure of the air quality, especially as it relates to the health and comfort of the people occupying the building. Air quality can be adversely affected by increased levels of carbon dioxide, carbon monoxide, volatile organic compounds (VOCs), particulates, or bacteria. Increased ventilation reduces the level of all of these unwanted contaminants. Measuring the CO2 concentration provides an economical way of ensuring that there is sufficient air circulation and prevents over-ventilation which can add unnecessary heating or cooling costs.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Emissions Monitoring for Cement Plants

    Opsis provides state-of-the-art monitoring equipment, fully meeting the high standards of monitoring performance and reliability that the cement industry requires. The Opsis in situ systems are designed to withstand environments with high particulate levels and high temperatures.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Tunnel Construction and Underground Mining Industry

    Dust can pose a particular hazard for people working in enclosed spaces such as in tunnel construction and deep mining. As the workers inhale, dust gets into their airways and can cause health problems. Poor visibility brings added exposure to risk. A reduction in the amount of dust generated also lengthens the service life of the machines. Therefore efficient dust control is particularly important in this industry.

    By EmiControls based in Bolzano, ITALY.

  • Pulsair`s industrial mixers for asphalt industry

    Pulsair Systems is the leading provider of industrial pneumatic mixing and air agitation equipment for the asphalt industry. Our industrial asphalt tank mixing system are efficient, cost-effective and well suited for mixing sealcoat, asphalt emulsions, coal tar and other asphalt based sealers.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Hydrodemolition

    Problem: The impact of concrete breakers and jackhammers is not limited to deteriorated concrete. It can damage rebar and produce vibration that generates microfractures in sound concrete. Not to mention the noise and the dust.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Geosynthetic Lining for Highway and Civil Applications

    GCL can be used in highway and civil applications such as at airport de-icing facilities used to remove ice build up on the surfaces of planes. During the application process, glycol-based de-icing fluids can leak into local stormwater runoff, potentially causing pollution. CETCO GCLs were found compatible with de-icing fluid (glycol diluted 50/50 with water). GCLs can also be used to line roadway drainage swales for containment and prevent excessive percolation, thereby minimizing potential for groundwater contamination. Another example of using GCL in civil and highway applications is using the liner to contain acid rock and prevent runoff from entering the local water supply.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Smoke generator device for building envelope, energy studies & air tightness testing

    The air tightness or leakage rate of a building is the uncontrolled flow of air through holes, gaps and cracks in the fabric of a building, which may not be detectable simply by looking at the outside of the building. Filling a building or void with smoke and pressurising that volume, will result in a visible discharge of smoke from any problem areas. Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a `leaky` building, ductwork, pipes, aircraft or containment area with smoke and ideally adding a small amount of pressure to the area being tested, will result in a visible discharge of smoke and, simply put, the greater the volume of smoke, the bigger the leak.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Applications and Air Pollutants Removed in the Fiberglass Industry

    Removal of urea and phenol formaldehyde resin and fibers from sizing dye operations, particulate and blue haze emissions from fiberglass mat ovens. Removal of styrene emissions from fiberglass composite manufacturing operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Waste recycling systems for construction & demolition

    Kiverco specialise in the design, manufacture and installation of Construction and Demolition waste recycling systems. We can offer a C & D recycling plant that can be tailored to your unique recycling specifications. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your C & D recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Infrastructure & Civil Industry

    Revitalizing our bridges, railways, seaports, water towers and other aging infrastructure is a growing priority. Make these projects a reality by reducing or eliminating the traditional overhead costs of removing lead paint,
    PCBs and asbestos on a large scale.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Noise and vibration monitoring for the construction site

    By implementing a noise and vibration monitoring system, the impact of construction site activities can be managed by: Complying with legal requirements relating to public health sanctioning the absence of appropriate precautions to limit abnormally high levels of noise and vibrations. Taking environmental quality considerations into account (HQE approach). Limiting noise and vibration pollution with the comfort of neighbouring residents in mind. Enabling companies in the public works and construction industry to adopt a transparent approach to communication with local residents, in order to avoid resistance and instead gain their support for a given project. Providing the site manager with reliable and official data, should it be required. 01dB offers solutions for construction professionals to suit the requirements of each building site. It provides them with metrological systems (such as the certified DUO sound level meter, dB4 and MR2002) with 01dB WebMonitoring services to ensure optimal control of noise & vibration impact of the construction work, using as well communication tools intended for the general public.

    By ACOEM based in Limonest, FRANCE.

  • Offering data for quantifiying & profilling weather-related risks for engineering, architectural & constructions markets

    Weather Analytics is the best single source of data used for quantifying and profiling weather-related risks for the engineering, architectural and construction markets. We provide global geographic coverage and easy access to comprehensive climate intelligence, including on demand Typical Meteorological Year (TMY) and Actual Meteorological Year (AMY) climate files for simulation and modeling.

    By Weather Analytics based in Bethesda, MARYLAND (USA).

  • Oil Mist Seperator for Building Construction

    Contec oil mist separators ensures the façade design of ETFE cushions for efficient and environmentally friendly glare-, heat- and UV-protection. Contec GmbH, Bad Honnef is a leading manufacturer of filtration systems, oil mist separators and liquid level measuring technology. The use of the Contec oil mist separator (COMS) in the field of building construction is definitely very innovative and our system has proven again its advantages in environmental aspects.

    By contec GmbH Industrieausr├╝stungen based in Bad Honnef, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you