Calibration Gas News

  • How to Set Up a Perimeter Monitoring Kit

    It’s that time of year again: construction season!  Which means perimeter monitoring has again become necessary to measure worker exposures to noise, dust, gas emissions, and provide documentation that you’ve implemented procedures to keep the surrounding community safe from these issues. RAECO Rents perimeter ...


    By Raeco Rents

  • Addition of in-built calibration gas dilution function to our range of FTIR Gas Analysers

    Protea are proud to announce the addition of in-built calibration gas dilution function to our range of FTIR gas analysers. This feature, using precision a Mass Flow Controller within the analyser, allows the FTIR user to dynamical calibrate their FTIR gas analyser from within the FTIR software at the touch of a button. Without the need for expensive external gas dilution equipment, FTIR gas ...


    By Protea Limited

  • Innovyze Further Expands RDII Analyst Functionality, Setting New Standard for Sanitary and Combined Sewer System Model Calibration

    Innovyze, a leading global innovator of business analytics software and technologies for smart wet infrastructure, today announced the newest release of its RDII Analyst (Rainfall-Derived Inflow and Infiltration) for InfoSWMM and ...


    By Innovyze

  • Innovyze Further Expands RDII Analyst Functionality, Setting New Standard for Sanitary and Combined Sewer System Model Calibration

    Innovyze, a leading global innovator of business analytics software and technologies for smart wet infrastructure, today announced the newest release of its RDII Analyst (Rainfall-Derived Inflow and Infiltration) for InfoSWMM and ...


    By Innovyze

  • Promecon installed in more than 60 cement plants worldwide

    With the latest orders of the McON air gas flow measurement to measure the kiln off gas amount at the downcomer duct or outlet gas volume of vertical roller mills the total amount of installed systems reached a number of 100 all over the world. The benefits achieved in plants of leading cement manufacturers now satisfy private oprerated cement plants as well. PZW Wittekind in Germany, Cementos ...

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • Geotech’s commitment to our customers

    Geotech is the market leading manufacturer and supplier of portable and fixed landfill gas and biogas analysers.  Our products are rapidly becoming even more important with the growing focus on renewable energy from gas produced in anaerobic digestion and landfill sites.  Learn about Geotech’s approach to manufacturing robust and reputable gas analysers across the world and how we ...


    By Geotech

  • Geotech’s commitment to our customers

    Geotech is the market leading manufacturer and supplier of portable and fixed landfill gas and biogas analysers.  Our products are rapidly becoming even more important with the growing focus on renewable energy from gas produced in anaerobic digestion and landfill sites.  Learn about Geotech's approach to manufacturing robust and reputable gas analysers across the world and how we ...


    By Geotech

  • EN ISO 17025 calibration

    On rare occasions, e.g. when a device is used for measurement of emissions of industrial objects (and based on that a fine for environment pollution is calculated) the device must hold a valid calibration certificate, issued by authorised, accredited laboratory. madur co-operates with accredited laboratory, therefore it is possible to deliver any device with the mentioned ISO 17025 certificate. ...


    By madur Polska Sp. z o.o.

  • The high performances gas diluter/calibrator from LNI Swissgas

    LNI Swissgas in Geneva/Switzerland is proud to announce the launch of the new gas dilutor/calibrator: the Sonimix Sx7100. The Sx7100 is the 2nd generation of the previous Sx7000. It uses a combination of high precision Mass Flow Controllers (MFC’s) according to the norm ISO 6145-7. The goal of the Sx7100 is to reduce the amount of gas cylinders standards and generate any mixture ...


    By LNI Swissgas

  • Humidity calibration in non-air gases at above-atmospheric pressures

    Many laboratories can only perform humidity calibrations in air at atmospheric pressure. However, industrial humidity measurements may be at high pressures, or in other gases. For best validity, humidity calibrations should ideally be in the gas medium of use, because the performance of some hygrometers can depend on gas species and pressure. Calibration ...

  • NPL pioneers metrology apprenticeship standards to set blueprint for industry

    The Department for Business, Innovation and Skills (BIS) has announced a new project to outline standards and assessment guidelines for metrology apprenticeships, to be led by the National Physical Laboratory (NPL). The project forms part of the government's Trailblazer programme, which allows groups of ...

  • Ecotech Australia raises the bar on World Environment Day: when close enough isn’t good enough.

    Ecotech Australia, a world-leader in environmental monitoring, has announced the launch of its Serinus Gas Calibrator series. This new generation of Gas Calibrators deliver precise and constant dilution ratios of various gases and gas mixtures, including carbon monoxide, ozone, nitrogen oxide and sulfur dioxide. Speaking of the significance of the launch Nicholas Dal Sasso, Managing Director of ...


    By Ecotech Pty Ltd

  • Ecotech Australia raises the bar on World Environment Day: when close enough isn’t good enough.

    Ecotech Australia, a world-leader in environmental monitoring, has announced the launch of itsSerinus Gas Calibrator series. This new generation of Gas Calibrators deliver precise and constant dilution ratios of various gases and gas mixtures, includingcarbon monoxide, ozone, nitrogen oxideand sulfur dioxide.  Speaking of the significance of the launch Nicholas Dal ...


    By Ecotech Pty Ltd

  • PureAire O2 Monitor for Food Manufacturing Tunnel/Freezers with N2 and CO2: Using a 10 Year No Calibration Sensor

    For flash freezing nothing beats a liquid nitrogen or carbon dioxide immersion or tunnel style freezer for efficiency, overall performance, and cost savings. If you haven't yet switched to an immersion freezer, doing so now could position you to better compete in your market segment and save money over time. Learn more about why these freezers are a must for frozen food manufacturers. Immersion ...

  • Sierra Instruments Releases New Gas Mixing Feature

    Sierra Instruments: Following in our commitment to drive innovation that creates value for customers, we are excited to announce the new gas mixing software package, now included with every QuadraTherm 640i/780i thermal mass flow meter on a beta trial basis. The “qMix™” software package is a unique feature of the Smart Interface Program (SIP) unlike anything available on the ...


    By Sierra Instruments, Inc.

  • Sierra Instruments Releases New Gas Mixing Feature

    Following in our commitment to drive innovation that creates value for customers, we are excited to announce the new gas mixing software package, now included with every QuadraTherm® 640i/780i thermal mass flow meter on a beta trial basis. The “qMix™” software package is a unique feature of the Smart Interface Program (SIP) unlike anything available on the market for ...


    By Sierra Instruments, Inc.

  • New Gas Generator to check personal Gas Detectors

    Personnel working in chemical plants protect themselves with personal gas detectors from gas exposure. Gas leaks are very unlikely to occur, so the gas detector will always display „0“. An instrument displaying zero can do so for two reasons: a) The concentration is zero. b) The instrument is defective. For good reasons a daily check of the instrument is mandatory. It would ...

  • Certification of calibration instruments for refrigeration

    Equipment Subject to Adjustment: The equipment that should be subject to periodic calibration are: Digital thermometer 4-way Manifold for R410A and R407c analog or digital Electronic balance; Digital Caliper / Meter AC Refrigerant gas leak detector The calibration process is the operation that the door, by comparison with a standard instrument , ...


    By Eurotec BT Srl

  • Make Linearity Testing Easier with a Gas Dilution Kit

    The principle of a linearity test is to check that the gas analyser system is ‘linear’. The linearity shall be calculated and tested using the procedure given in annex B of the standard EN14181. Linearity tests can be performed by Service Engineer, Site Engineer or Stack Testing House, although must be deemed competent to perform the checks. The reference material concentrations shall ...


    By a1-cbiss

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you