Only show results in Texas? Ok

Combustion Air services for Air and Climate

  • Combustion Optimization Service

    Synterprise Solutions For Waste To Energy Plants: PERFORM Program, Program Expert Review, Focused Optimization, Risk Mitigation.

    By Synterprise based in Chattanooga, TENNESSEE (USA).

  • Gas Cylinder Disposal Services

    Compressed gases are a unique hazard. Depending upon the particular gas within a cylinder, there is potential for flammability, combustibility, corrosivity, toxicity or air reactivity. Yet, over 90% of unknown gases can be identified on your premises. Through our unique, industry leading, turn-key services, HazChem identifies, processes and ...

    By HazChem Environmental Corporation based in Addison, ILLINOIS (USA).

  • Air Dispersion Modelling Services

    Computerised mathematical modelling is ideal for assessing likely impacts of air-borne pollutants and for assessing effects of reduced emissions. Using AERMOD or ISCST3 nesa can: model a variety of parameters and situations to ensure compliance with licence requirements or as part of an IPC/IPPC licence application. Define appropriate stack height ...

    By NESA (Environmental Consultants) based in Ashbourne, IRELAND. from Air Services Service line

  • NOx air dispersion · consultants

    NOx is a generic term for the mono-nitrogen oxides NO and NO2 (nitric oxide and nitrogen dioxide). In areas of high motor vehicle traffic, such as in large cities, the amount of nitrogen oxides emitted into the atmosphere as air pollution can be quite significant. NOx gasses are formed everywhere where there is combustion, like in an engine. They ...

    By Canarina Environmental Software based in Canary Islands, SPAIN.

  • Indoor Air Quality Services

    Typical surveys include testing for the several common components normally of primary concern to indoor air quality and comfort: Carbon monoxide, Carbon dioxide, Combustible gases, Polytests for 18 gases, Total hydrocarbons, Bioaerosols, Hydrogen Sulfide, Formaldehyde, Oxygen, Dust, Asbestos, Site-Specific compounds.

    By Mystic Air Quality Consultants, Inc. based in Groton, CONNECTICUT (USA).

  • Mechanical Engineering Services

    Equipment Selection: Pumps - All types and sizes from fractional to 10,000hp. Gas Turbines. Steam Turbine Generators. Cooling Towers. Air Compressors from 100 to 10,000 scfm. Boilers - Gas, Oil, and Coal-Fired. Process Equipment - Heat Exchangers, Water Treatment. Scrubbers, Precipitators, Baghouse Chillers.

    By Lauren Engineers & Constructors based in Abilene, TEXAS (USA).

  • Design, Build and Maintenance Services

    At Cycle Therm, we are experts in the design, build and maintenance of oxidation equipment. We offer the following services: Maintenance Agreements: Keep your new or existing RTO running at top efficiency with a long or short term maintenance agreement. Our service engineers can increase your oxidizer performance and uptime percentage.

    By Cycle Therm, LLC based in Hernando, FLORIDA (USA).

  • Catalytic Converter Recycling Services

    Autocatalyst is a part of the vehicle used for both decreasing the fuel consumption and the amount of hazardous chemical gases produced during the burning process.  Autocatalysts basically provide a cleaner exhaust gas release and also include valuable metals such as platinum, palladium and rhodium in different amounts; which change as per ...

    By Evciler based in Altındağ - Ankara, TURKEY.

  • Oxy-Firing for CO2 Mitigation Service

    The need for new carbon-sequestration technologies has increased due to concerns about global warming and potential regulations requiring the sequestration of CO2 emissions from fossil-fuel-fired power-generating stations. Specifically, technologies are needed that will allow the carbon dioxide in flue gas to be separated from the nitrogen and ...

    By Southern Research Institute based in Birmingham, ALABAMA (USA). from Greenhouse Gas Mitigation Service line

  • Storage Tank Degassing Service

    We designed our Envent Mobile Thermal Oxidation System (EMTOS) to be the safest, fastest and most effective means of degassing large storage tanks. EMTOS meets the 1,400 °F threshold set by the Environmental Protection Agency for vapor destruction efficiencies of 99+%.  Third-party tests confirm our performance, and we document every job ...

    By Envent Corporation based in Long Beach, CALIFORNIA (USA). from Degassing & Vapor Control Service line

  • Assessments, Upgrades and Optimisation Services

    Give your old energy plant new life! Through upgrades and/or optimisation we can help you obtain a stable operation, increased energy output, and emission levels that comply with today’s standards and legislation.Almost every old plant has the potential to perform even better. New technology provides many opportunities for existing plants to ...

  • Auditing of Boilers

    Performance evolution of Boilers. Feed air & Flue gas analysis. Optimization of excess combustion. Improved instrumentation for control. Improvement in operating practices. Incorporate heat recovery. Reduction of heat losses.

    By Eco Energies based in Sirsa, INDIA. from Major Plant Installations Audit Service line

  • Turbine Replacement Parts Services

    We routinely manufacture, according to OEM specifications, replacement turbine components for virtually every moving and non-moving part within a steam, gas, hydro or nuclear turbine. Our machining capacity is suited to meet every possible customer requirement and every single one of our machines—including our CNCs—are made in the ...

    By Schmidt Industries, Inc. based in Bay City, MICHIGAN (USA).

  • Methane Gas Services

    Methane gas is odorless and colorless, non-toxic and non-carcinogenic. It is an inert gas. Methane gas is lighter than air, approximately 55% the weight of air. The ignition temperature of methane gas is approximately 1,000¢ªF, or a spark. Methane gas can only combust within a specific range of concentrations in air. The explosive range ...

    By Terra-Petra, Inc. based in Los Angeles, CALIFORNIA (USA).

  • Organics Ammonia Removal Solution

    Thermally-driven ammonia stripping was developed by Organics to offer an alternative route to that of pH adjustment for continuous-process ammonia stripping. With a thermally-driven stripper no chemical additions are required, apart from the minor addition of anti-foam agent.

    By Organics USA, Inc. based in Sheridan, WYOMING (USA).

  • Analysis & Recommendation Services

    In-depth analysis without meaningful recommendations is no help at all; critical decisions affecting operations, production, expansion and even plant design can depend upon testing results. Novinda offers the unique perspective gleaned from decades of relevant experience and literally hundreds of comprehensive tests on behalf of air quality ...

    By Novinda Corp. based in Littleton, COLORADO (USA).

  • Compliance Testing Services

    Accurate & Reliable; Knowledgeable about permitting issues and needs, Novinda offers full-scale single and multi-pollutant control testing and engineering services to capably address air quality issues and ensure compliance with the myriad of regulatory standards. Our advanced technologies and engineering expertise ensure that you receive ...

    By Novinda Corp. based in Littleton, COLORADO (USA).

  • Overfire Air Systems

    Overfire Air (OFA) works by diverting a portion of the total combustion air away from the primary combustion zone. Overfire air lowers the air-to-fuel ratio at the burners, lowering the oxygen in the primary flame zone, which reduces NOx conversion of fuel-nitrogen in volatiles and reduces thermal NOx formed in the primary flame zone.

    By STEAG Energy Services LLC based in Kings Mountain, NORTH CAROLINA (USA).

  • Ragnar - On-Site Carbonizing Services

    With over 25 years of experience in equipment manufacturing and operating within the industry, Clean Air Combust provides complete on-site services using our CARBONATOR™ model air curtain carbonizers.

    By Ragnar Original Innovation (ROI) based in Chester, NEW HAMPSHIRE (USA).

  • RICE NESHAP Compliance

    Johnson Matthey Stationary Emissions Control Group (JMI) and Cummins Emissions Solutions (CES) have formed an alliance to provide the Cummins Distribution Network with products to help their customers meet the requirements of the Reciprocating Internal Combustion Engine (RICE) National Emission Standards for Hazardous Air (NESHAP) regulation.

    By Cummins Inc. - Cummins Emission Solutions based in Columbus, INDIANA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you