Only show results in Virginia? Ok

Gas Filtration Applications

  • Cloud Point of Diesel Fuel #3074

    The Cloud Point of a diesel fuel is the temperature below which wax forms giving the fuel a cloudy appearance. This parameter is an important property of the fuel since the presence of solidified waxes can clog filters and negatively impact engine performance. The traditional laboratory methods for the measurement of Cloud Point are optical in nature, but rely on cooling the fuel for the wax formation to occur. Guided Wave’s process analyzers can measure compositional changes in the fuel that will be directly related to the wax formation and hence the Cloud Point. This note will discuss the use of Guided Wave hardware and software tools for the measurement of the Cloud Point of diesel fuel using fiber optic-based, near-infrared (NIR) spectroscopy. NIR can be applied in real time directly in process.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Environmental technology for droplet seperation industry

    As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

    By Körting Hannover AG based in Hannover, GERMANY.

  • Environmental technology for droplet seperation industry

    As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

    By Körting Hannover AG based in Hannover, GERMANY.

  • Filtration systems & solutions for energy sector

    Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Ozone generators for swimming pools & spas application

    Ozone is a very effective alternative to chlorine and other chemicals as a disinfection agent in swimming pools. Ozone can safely prevent the formation of chlorine byproducts, such as chloramines and trihalomethanes which are potentially carcinogenic.

    By Absolute Systems Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Bio-Hazard and Crime Scene Cleanup

    OmniAire HEPA air filtration machines can remove odors and toxic VOCs released into the air during the cleaning and removal process. OmniAire portable air filtration and purification equipment offers the most efficient and economical solution to reduce toxicity and improve safely for your Bio-Hazard projects. Typically, the standard 99.97% HEPA filter is sufficient, however, if you need the next level of airborne pollutant removal for more toxic applications, such as filtering out VOCs, viruses, smoke and gas molecules, add an OdorGuard Activated Carbon filter.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Water disinfection for the oil and gas industry

    Oil and gas companies, whether in coastal or offshore settings, use water in various stages of production and for drinking and sanitary purposes. Process water, feed water and wastewater requires disinfection and filtration treatment prior to use, reclamination or discharge. De Nora Water Technologies has been providing water and wastewater treatment solutions to the oil and gas markets for more than 25 years.

  • Process Belt Meshes for Belt Filter

    VACUBELT filter belts for belt filters guarantee continuous filtration with high throughput, low residual moisture and optimal results for the filter effect.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Industrial Meshes For Hot Gas Filtration

    The SolidWEAVE stainless steel filters from GKD have for decades been in use in a variety of applications for hot gas filtration. Knowledge of the specific requirements for the filtration of hot gases and continuous optimization and further development result in the high quality of our filter meshes.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Biofiltration

    Biological Aerated Upflow Filtration (BAF) for high efficient Waste Water Treatment in Refinery Industry with more than 20 reference plants and more than 20 years of experience

    By AquaBiotec based in Paris, FRANCE.

  • Water removal filtration

    SAF is the key component for a wide range of enhanced nonwoven filter media fabrics that are designed for the removal of water and particulates from aviation fuel, automotive diesel and a wide range of oils. Such fabrics help reduce problems associated with water contamination in such situations. Its versatility gives rise to cost savings over traditional cellulosic-based absorption media, while offering full compliance potential to stringent international filtration standards – particularly in the aviation fuel and hydraulic oil markets. Applications: A significant reason for the majority of oil and fuel system failures is the presence of high water levels in dissolved, dispersed and free water. SAF-based filter media fabrics can remove both dispersed and free water to very low ppm levels at industry leading rates. This leads to reduced fuel and oil degradation and provides the required filter quality for efficient machine operation.

    By Technical Absorbents based in Grimsby, UNITED KINGDOM.

  • Installations for sludge dewatering for municipality industry

    The dewatering phases in municipal processes are basically of biological sludge originated from purification processes. Bilfinger Water Technologies has realized many complete installations of sludge purification regarding the processes of water purification, purification of waste waters and SUW (solid urban waste) treatment.

    By Bilfinger Water Technologies GmbH based in Aarbergen, GERMANY.

  • Gas infusion technology solutions for the oxygen purifications

    The two essential building blocks of life are oxygen and water. Without them there would be no life. The principle ingredients of all Oxygen Pür Skin care products are purified water and oxygen. Our oxygen infused skin serums bring life and health to the skin and the underlying dermis. Oxygen Pür is an advanced tissue oxygen serum that provides transcutaneous (through the skin) transfer of oxygen into the dermis.

    By inVentures Technologies Incorporated. based in New Brunswick, NEW BRUNSWICK (CANADA).

  • Premium

    Air filtration and gas purification solutions for protekfruit home

    Applied to domestic refrigeration, Bioconservacion’s technology increases the shelf-life of fruit and vegetables, providing benefits to equipment manufacturers and consumers. As they mature, fruit and vegetables naturally produce ethylene. Ethylene accelerates maturation which is why systems that eliminate ethylene, VOCs and fungus spores from the environment are especially beneficial, as they lengthen the useful life of fruit and vegetables increasing shelf life by up to 25%.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Premium

    Air Filter Housings for the Gas Industry

    By Shelco Filters based in Middletown, CONNECTICUT (USA).

  • Filtration systems & solutions for nuclear industry

    Within the nuclear industry there are ongoing operational challenges and potential hazards associated with environmental emissions and the protection of the workforce, such as high temperatures, high radioactivity, high solids loads and chemically aggressive environments. Therefore the industry demands exceptional levels of technical expertise and quality, in conjunction with specific skills to solve many of its most intractable problems.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Pulsair`s industrial mixers for flue gas desulfurization industry

    Pulsair Systems is a leading supplier of efficient mixing system for Flue Gas Desulfurization (FGD) for over 25 years. Our mixing process is more effective and energy efficient than mechanical top-entry agitators, side-entry agitators and other types of mixers that are expensive and require more maintenance and consume more energy.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Industrial water Nickel & Cobalt purification

    Cobalt is a brittle, hard transition metal with magnetic properties similar to iron. It is mainly used as an alloy with iron, nickel or other metals to produce corrosion and wear resistant products for high temperature applications (such as jet engines, gas turbines, etc.). Cobalt is normally produced as a by-product of nickel or copper mining. The purity requirements for Cobalt do not allow nickel to exceed a concentration 0.1%. Earlier, the nickel was removed by lime precipitations, but as the market specifications became more stringent, ion exchange technologies have been applied.

    By PuriTech Ltd based in Herentals, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you