Only show results available in Virginia? Ok

Gas Scrubbers Applications

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including water treatment facilities, sludge ponds, sulfur recovery units, and API separators. To remove odors during tank cleaning and maintenance operations, portable dispersion systems can be used in the immediate work area to control malodors. Ecosorb products can be directly injected into flues and stacks and may be used as a substitute scrubbing solution in some applications.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Chlorinated hydrocarbons

    The hazardous chlorinated hydrocarbons are completely destroyed without residue. There is no generation of hazardous by-products, e.g. dioxins.

  • Premium

    Gas monitoring instruments and systems for semiconductor manufacturing

    In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane C2F6.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Water treatment chemicals for the steel and coke industry

    The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for waste water remain unchanged, resulting in an increased demand for professional water treatment.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Wastewater treatment solutions for waste sector

    IDRAFLOT flotation units are technological solutions which allow the separation of the suspended solids from wastewater coming from gas scrubber blow down (high concentration of SS) but also for the separation of low density compounds (oil and fats) which can be present in the streams collected by collectors. IDRAFLOT units can be easily installed also within small footprint collection centres.

    By IDRAFLOT based in Zoppola, ITALY.

  • Premium

    Raw-gas monitoring for scrubber optimizing

    The consumption of scrubbing material in a scrubber is related to the mass flow of acid gases. Hydrogen chloride (HCl) and sulphur dioxide (SO2) are the major acid gases in an incinerator. By measuring the mass flow of SO2 and HCl in the raw gas going into the scrubber, it is possible to calculate the required quantity of scrubbing material.

    By Opsis AB based in Furulund, SWEDEN.

  • Environmental technology for droplet seperation industry

    As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

    By Körting Hannover AG based in Hannover, GERMANY.

  • Air Pollution Removal Orthopedic appliances Industry

    Removal of acid gases and NOx from material surface treatments. Remove titanium dust from grinding, abrasive polishing and buffing operations. Emissions from high temperature furnaces.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Biogas measurement for the waste to energy industry

    In a recent project and the subject of this paper, Kurz engineers conducted a study that lead to a unique, new design that allows thermal flow meters to perform accurately within a wet digester gas environment. The testing environment applies to landfill and digester applications.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Environmental technology for droplet seperation industry

    As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

    By Körting Hannover AG based in Hannover, GERMANY.

  • Applications and Air Pollutants Removed for Mineral Products Industry

    Removal of acid gases and particulate from cement, brick and other product kilns. Mineral product dryers including coal. Hot mix asphalt plant particulate control. Sulfur dioxide and hydrochloric acid gas removal.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Agitation and mixing solutions for flue gas desulfurization

    FGD (Flue Gas Desulfurization) involves the treatment of flue gas from coal fired power plants.  The main goal is to remove sulfur, particulates, and other chemicals such as mercury from the flue gas prior to environmental release.  Governmental regulations by the EPA put limits on the amount of impurities which can be released into the air.   The use of mixers to clean and scrub the flue gas is utilized to help power companies meet permitted limits on the release of controlled substances.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Environmental technology for gas cleaning industry

    For many decades now Körting gas scrubbing plants have distinguished themselves in diverse branches of industrial exploitation with great success. The principle components of these plants are the: The conversion of basic process engineering oparations for the exchanging of heat and materials such as cooling, physical and chemical absorption and dedusting permit separation and recovering of gaseous, liquid and solid materials from gases.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Applications and Air Pollutants Removed in the Petroleum/Petrochemical Industry

    Scrubbing of Hydrogen sulfide, mercaptans and other organosulfur compounds from sour gas and other sources. Proprietary regenerative scrubbing chemistries for hydrogen sulfide removal with sulfur production. By-product production systems for producing sodium hydrosulfide (Nash) from hydrogen sulfide. Sulfur dioxide scrubbing. Recover catalyst dust from FCC units. HCL storage tank vent scrubbing. Removal of HCL and particulate from thermal oxidizers burning chlorinated plastics. Marine drilling platforms sulfur dioxide thermal oxidizer emissions.  Asphalt plant scrubbers and hydrogen sulfide emissions from holding tanks. Pilot plant scrubber systems for hydrogen sulfide. Removal of halogenated and sulfur bearing gaseous compounds from high temperature thermal oxidizers and drilling platforms waste. Well drilling hydrochloric acid storage tanks.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Applications and Air Pollutants Removed in Municipal Water Treatment Plants

    Applications include: emergency chlorine scrubber systems for cylinder storage area. Removal of powdered carbon particulate emitted from storage silo vents during the loading operation. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Applications and Air Pollutants Removed for Fire Training facilities

    Complete smoke scrubbing emission control systems from flashover Class A type training simulators.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Incineration Industry Emissions Monitoring & Analysis

    Monitoring of emissions from incinerators is a demanding application for Continuous Emission Monitoring Systems. The emissions produced are highly corrosive, some of the gases are soluble and, because the waste being burnt is constantly changing, the resulting stack gas temperature varies widely.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Applications and Air Pollutants Removed in Nuclear Fuel Processing – Energy-Nuclear Power

    Removal of uranium hexafluoride particulate and other radioactive compounds from processing operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Applications and Air Pollutants Removed in the Sand and Rock Products Industries

    Removal of silica sand from dryers. Crushing and material handling operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Applications and Air Pollutants Removed for Marine Power Plants

    Control of ship diesel engine emissions to meet MARPOL requirements for particulate ash and soot, sulfur dioxide and NOx. Special compact inline stack mounted space saving designs. Both open loop arrangements using sea water or closed loop using a range of chemical solutions.  Complete system offerings.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you