Hot Gas News

  • CPI Installs Thermal Oxidizer at Fuel Cell Manufacturer

    Catalytic Products International (CPI) installed two (2) 2,600 SCFM Direct Fired Thermal Oxidizers at an East Coast USA fuel cell manufacturer for the abatement of volatile organic compounds (VOCs), hydrogen and carbon monoxide during the ...

  • CPI Installs RTO at Medical Diagnostics Manufacturer

    Catalytic Products International (CPI) recently installed a Regenerative Thermal Oxidizer (RTO) at a Midwest USA medical products manufacturer for the abatement of volatile organic compounds (VOC). ...

  • New ATEX approved gas sampling coolers for Zone 2

    AGT-PSG, world renowned supplier and specialist of gas sampling and conditioning equipment, now offers, in addition to its BCR05 compressor coolers series which provides safe and reliable gas analysis in ATEX zone 1, two new coolers for ATEX zone 2. BCR02 is available with one or two ...

  • Evonik Launches Polyimide Fibers with Improved Mechanical Stability and Flexibility

    Evonik has developed a new generation of polyimide fibers for the rising demands of the industry. The new product, brand named P84® HT, is distinguished by improved mechanical stability and flexibility at continuously high operating temperatures. With their unique multilobal cross-section and the largest surface area available in the market, these high-tech fibers ...


    By Evonik Industries AG

  • Dust monitoring in ambient air to prevent explosion zones in a plant

    Application A producer of dry mortar needs dry sand and trass for the production process. Both materials are dried in a hot gas heater at a temperature of 500 °Cbefore they are admixed. The hot gas heater uses brown coal dust as combustion material. The brown coal dust, which is stored in a silo, is transported via a rotary valve in free ...


    By ENVEA

  • Increased CEMS reliability with direct measurement of H2O

    Pollutant gases such as SO2, NO, CO, HF, HCl and dust are products of combustion that are regulated by national environmental protection agencies. Axetris’ laser gas detection module LGD F200 provides an affordable solution for continuous H2O measurement. Continuous Emission Monitoring Systems (CEMS) are used to permanently measure pollutants. All gases have to be corrected and reported at ...


    By Axetris AG

  • Dust monitoring in ambient air to prevent explosion zones in a plant

    Application A producer of dry mortar needs dry sand and trass for the production process. Both materials are dried in a hot gas heater at a temperature of 500 °Cbefore they are admixed. The hot gas heater uses brown coal […] Application ...


    By ENVEA

  • Dust Monitoring in Ambient Air to Prevent Explosion Zones in a Plant

    A producer of dry mortar needs dry sand and trass for the production process. Both materials are dried in a hot gas heater at a temperature of 500 °Cbefore they are admixed. The hot gas heater uses brown coal dust as combustion material. The brown coal dust, which is stored in a silo, is transported via a rotary valve in free fall to a distribution plate. From there it is blown by an ...


    By ENVEA

  • The future of Medical Waste treatment

    At Addfield we are proud of the fact that we produce some of the world’s most advanced solutions to Medical Waste Treatment.  Our MP range is currently changing the way that medical and clinical waste is being disposed of in many developing countries.  This range is trusted by world aid agencies and governments globally and here is a breakdown of why it is so popular. The Addfield ...

  • The Future of Medical Waste Treatment

    At Addfield we are proud of the fact that we produce some of the world’s most advanced solutions to Medical Waste Treatment.  Our MP range is currently changing the way that medical and clinical waste is being disposed of in many developing countries.  This range is trusted by world aid agencies and governments globally and here is a breakdown of why it is so popular. The Addfield ...

  • The future of Medical Waste treatment

    At Addfield we are proud of the fact that we produce some of the world’s most advanced solutions to Medical Waste Treatment.  Our MP range is currently changing the way that medical and clinical waste is being disposed of in many developing countries.  This range is trusted by world aid agencies and governments globally and here is a breakdown of why it is so popular. ...

  • Sierra Introduces One Complete Industrial Flow Energy Solution

    Sierra Instruments announces the launch of its new flow energy solution for managing and optimizing flow measurement for industrial facilities of all sizes. It features Sierra’s QuadraTherm 640i/780i thermal flow meters, their InnovaMass 240i/241i vortex flow meters, and their new ...


    By Sierra Instruments, Inc.

  • Laser Gas Detection TDLS Technology

    Axetris uses proprietary technology-enhanced TDLS for gas detection. A 0.05 nm narrow bandwidth diode laser beam is used to scan across an absorption band of the target gas, thus performing a high-resolution near infrared absorption measurement. Laser gas detection, based on Tunable Diode Laser Spectroscopy or TDLS, provides a valid solution to many challenges in environmental gas ...


    By Axetris AG

  • 20 Year Old FTIR Gas Analyzer Finally Retires

    After almost 20 years of reliable service a Gasmet FTIR multigas analyzer has finally been retired. The instrument, which is a Gasmet 9540 was purchased at the end of the last century by VTT, the Technical Research Centre of Finland. “We have utilised this analyzer in a variety of research projects over the years and it has performed extremely well. However, some of the spare parts are no ...


    By Gasmet Technologies Oy

  • 20 year old FTIR gas analyzer finally retires

    After almost 20 years of reliable service a Gasmet FTIR multigas analyzer has finally been retired. The instrument, which is a Gasmet 9540 was purchased at the end of the last century by VTT, the Technical Research Centre of Finland. “We have utilised this analyzer in a variety of research projects over the years and it has performed extremely well. However, some of the spare parts are no ...


    By Gasmet Technologies Oy

  • Optomec Showcases Aerosol Jet 3D Printing Systems for Flexible Circuits and Sensors at FlexTech Conference

    Optomec, a leading global supplier of production grade additive manufacturing systems for 3D printed electronics announced today that the company will showcase its Aerosol Jet systems for 3D production-grade printed electronics at the SEMI FlexTech conference, held June 20-21 at the Hyatt Regency in Monterey, California, Optomec will be in booth # 2005.  In addition to the exhibition Optomec ...


    By Optomec Inc.

  • Calciner firing of refuse derived fuels

    Alternative or refuse derived fuels (RDF) are mainly fired in kiln burners, preheater or calciner kilns. Of the greatest importance in this regard is homogenous fuel quality consisting of two-dimensional parts. Alternative fuel for the kiln burner has to be free of disruptive fractions (e.g. metals, stones, glass), which might cause problems in the feeding equipment or the burner itself. ...


    By Lindner-Recyclingtech GmbH

  • Advantage by energy efficiency

    When you speak of energy efficiency in thermal soil remediation, you cannot get past the VacuDry – technology. ...

  • CVD Acquires Assets of Tantaline A/S

    CVD Equipment Corporation (NASDAQ: CVV), a leading provider of chemical vapor deposition systems, has purchased certain assets (including all of the IP) formerly owned by Tantaline A/S of Nordborg, Denmark through our wholly owned subsidiary, CVD Materials Corporation. Formed in 2007, as a spin off from The Danfoss Group, ...


    By CVD Equipment Corporation

  • LGD F200 Platform 2 – “More Possibilities” for field use

    In mid-2016, Axetris launched the Platform 2 of the popular LGD F200, with a range of improvements that offer “more possibilities” for use in real-world applications. One such possibility is to configure an additional relay output and alarm available as an analog output. Relay Alarm Configuration The  ...


    By Axetris AG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you