Mist Eliminators Articles

  • New Mounting System Allows for Easier and Safer Aeration System Maintenance

    Featured in Environmental Science & Engineering Magazine, February 2018 Edition ...

  • The Evolution of Glycol Contactors

    The dehydration of natural gas is an integral part of many gas processing applications. Dehydration with triethylene glycol (TEG) is effective and has been successfully employed in both onshore and offshore facilities. The dehydration of natural gas is an integral part of many gas processing applications. Water can form hydrate crystals with hydrocarbons and acid gases (CO2 and H2S). ...


    By Sulzer Management Ltd

  • Medical Industry: Scrubber Eliminates Ethylene Oxide Case Study

    A contract sterilization service uses a single-stage scrubber to convert this hazardous gas to inert ethylene glycol: ETO Sterilization Inc. provides contract sterilization services for hundreds of northern New Jersey customers, concentrating on spices and herbs, cosmetic ingredients and medical supplies. Two of the largest ethylene oxide sterilization vessels in the world are in operation ...


    By CR Clean Air Group, LLC

  • Pharmaceutical: Scrubber Eliminates Ethylene Oxide Case Study

    A contract sterilization service uses a single-stage scrubber to convert this hazardous gas to inert ethylene glycol. ETO Sterilization Inc. provides contract sterilization services for hundreds of northern New Jersey customers, concentrating on spices and herbs, cosmetic ingredients and medical supplies. Two of the largest ethylene oxide sterilization vessels in the world are in operation ...


    By CR Clean Air Group, LLC

  • Hundreds of Options Facing Power Plants Purchasing New or Upgrading

    The wet calcium (lime and limestone) process is only one option for removing SO2. Dry systems, ammonium sulfate, seawater, amine and other processes are also alternatives. Assuming that the purchaser has decided to purchase a new or upgrade an existing wet calcium FGD system, he must then make hundreds of decisions about processes and components. These systems represent up to 15 percent of the ...


    By The McIlvaine Company

  • Maintain a Healthy Workplace with Oil Mist Collectors

    Many machining shops use a variety of metal working fluids, which support the creation of the metal components. During the creation process, lubricants and coolants get converted into vapors, aerosols and mist, which can be very harmful to workers who work in the facility. The inhalation of metal working fluids can lead to a number of medical conditions, which includes irritation of the eyes, ...


    By ProVent, LLC

  • How do oil mist collectors work? Comparing the different technologies, part I

    There are multiple different physical mechanics used by the industrial tools referred to as “oil mist collectors. Over the next two entries, we’re going to take a look at the four most common technologies and why a business might want to use or avoid each one. Centrifugal Mist Collectors The first ...


    By ProVent, LLC

  • A Short FAQ On Oil Mist Collectors

    Oil mist collectors, much like wet dust collectors and cyclone dust collectors, are used in a huge variety of industrial grinding, cutting, induction hardening, induction heating, and other industrial applications — but information about these commonplace air cleaning tools is few and far between. Here’s a short FAQ for those who ...


    By ProVent, LLC

  • Giant FRP Cooling Towers Built for Zinc Refinery Modernization

    Fabricated Plastics Limited of Maple, Ont., had previously built zinc sulfate cooling towers of FRP for various zinc refineries in North America when it was awarded a contract to produce six of the giant cooling units for a refinery in Tasmania, Australia. Each 5.9 m (19'4") in diameter and 18.3 m (60 ft.) high the Australian towers are major components of the plant which transforms raw zinc ore ...


    By Fabricated Plastics Limited

  • Particulate removal - Case Study

    Application QAFCO (the Qatar Fertiliser Company) operates the world's largest ammonia and urea production site at Mesaieed City, Qatar. The QAFCO 5 expansion project is a $3.2 billion investment to expand capacity to help meet the increased demand from agriculture. It is scheduled to come on stream in 2011. Each of the QAFCO plants uses highly explosive high-pressure natural gas from ...

  • Air pollution control for the fertilizer industry in the Middle East - Case Study

    Through our subsidiary company, APC Process Engineering, ERG has an impressive track record in the Middle East Fertilizer Production Industry. All our systems come with a performance guarantee backed by more than 30 years of experience successfully treating industrial air pollution around the world. ERG’s systems are used for treating silica, phosphate rock and scale dust, ammonia, hydrogen ...

  • Humid, corrosive and malodorous waste gases - Case Study

    Example: Production of bio-ethanol Similar tasks: Dryers, Fibre board industry The production of bio-ethanol - fermentation, distillation, pelleting and drying - generates odorous and humid waste gas. Upstream lamellar demisters reduce both drop formation - causing lower VOC destruction efficiency - and solid matters. The regenerative thermal oxidiser (RTO) ...

  • Cleaning & maintenance management

    Mercury is a known neurotoxin that is extremely toxic even in small amounts. It directly affects the central nervous and renal systems, causing developmental delays, motor and brain problems like those associated with autism. Mercury’s hidden danger also lies in when at room temperature and exposed, it vaporizes readily. Once it has become an aerosol, it is absorbed into the lungs and ...


  • Oil mist eliminator solves oil/smoke problem

    Workers in a component manufacturing division of and automotive company complained of an oil mist/smoke problem. The application involved a battery of 10 machines used in finish grinding and lapping valve lifters that use mineral seal oil as cutting fluid. Even though the oil mist was invisible, oil would condense on a cold glass held over an operating machines, indicating some of the ...


    By Kimre, Inc.

  • An Economical Solution to cooling tower drift

    In certain cases cooling tower drift (mist) can overwhelm conventional lower efficiency chevron mist eliminators. This paper explores an alternative strategy to control drift in those cases. The author uses a case history to illustrate conditions that can be expected to cause uncontrolled drift and to discuss a solution. The author acknowledges that the information presented is anecdotal, ...


    By Kimre, Inc.

  • How to: control process mist eliminators

    A structured-media mist eliminator is less prone to plugging than conventional knitted-mesh mist eliminators, achieves higher removal efficiencies per unit of pressure drop, and has lower energy consumption and operating costs. Many process air and gas stream problems involve mist carryover and mist eliminator plugging. This often results in reduced product yield, excessive energy usage, ...


    By Kimre, Inc.

  • A.E.S. 1977 paper to with plating emission problems

    A.E.S. PAPER The following paper has NOT been altered whatsoever. Some notes a) A.E.S. stands for American Electroplating Society. b) the mention of l¼ million cfm is now incorrect as it is well over 3 million cfm c) The Grandview E.C.E. scrubber is a condensed name for Eliminate, Coalesce, Eliminate …. and this design is called by various names such as LMS …low micron scrubber and LMITS …low ...


  • Glass Fiber Manufacturing

    Mat Glass Forming Lines. Applications where conventional equipment struggles to attain only marginal efficiency provides an opportunity for the Cloud Chamber Scrubber (CCS) to showcase its unique capabilities. Fiber optics manufacturing is a typical example. Follwing other successful applications in the glass industry, a pilot study to evaluate the performance of a Cloud Chamber Scrubber (CCS) ...


    By Tri-Mer Corporation

  • Kimre Mist Eliminators in Sulfuric Acid Plants

    B-GON® Mist Eliminators are widely used in the gas cleaning and contact section of sulfuric acid plants. Metallurgical, Oleum Producing, Sulfur Burning, and Regeneration Plants rely on the mist eliminators in the drying towers, absorption towers, and many other units to protect the quality of the product acid, protect downstream equipment from corrosion, protect the catalysts, and ultimately ...


    By Kimre, Inc.

  • Driftor - Drift Eliminators for Cooling Towers Brochure

    ABSTRACTIn certain cases cooling tower drift (mist) can overwhelm conventional lower efficiency chevron mist eliminators.  This paper explores an alternative strategy to control drift in those cases.  The author uses a case history to illustrate conditions that can be expected to cause uncontrolled drift and to discuss a solution.  The author acknowledges that the information presented is ...


    By Kimre Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you