Thermal Oxidizers Applications

26 Results found
Only show results available in Virginia?
OK
  • Category: Air & Climate ×

  • Subcategory: Thermal Oxidizers ×

Air pollution control for the food and bakery industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Anguil`s Food and Bakery industry experience provides reliable solutions for your emission control challenges. We have worked on a wide range of applications: achieving a high destruction level of ethanol from bakery ovens, chaff and particulate from coffee roasting, efficiently destroying grease from frying and rendering operations, handling smoke house emissions, and maintaining required opacity and odor levels from confectionery and gum manufacturing.

Air pollution control for the pharmaceutical industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your pollution control problems.

Produced water treatment for oil and gas industry

by MIOX Corporation     based in Albuquerque, NEW MEXICO (USA)

Recycling, reusing or treating produced water does not always have to be expensive.  Most Oil & Gas companies manage more water than they do hydrocarbons.  While MIOX is not a 100% solution to all produced water treatment needs, it does do the heavy lifting.

Industrial air pollution control for the forest products

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

Wood is one of the world`s oldest and most important raw materials. Apart from applications in the furniture and building industry and related sectors, CTP systems are used for air purification in the production of  lumber products such as  plywood panels, fibre boards (particle boards, MDF, OSB) and compressed wooden parts.

Humid, corrosive and malodorous waste gases

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

CTP's expertise with different coating systems, and an energy-saving pre-heater, protect the installation from corrosion even when waste gases are humid.

Air pollution control for the expanded polystyrene industry

by Catalytic Products International (CPI)     based in Lake Zurich, ILLINOIS (USA)

Removal of pentane and other VOCs from the molding and extruding process – commonly use regenerative thermal oxidizers (RTO) for air pollution control needs.

Air pollution control for the foundry industry

by Catalytic Products International (CPI)     based in Lake Zurich, ILLINOIS (USA)

Sand coatings to the gas producers or foundries – commonly use thermal oxidizers for air pollution control needs.

Air pollution control for soil remediation

by Epcon Industrial Systems, LP     based in The Woodlands, TEXAS (USA)

Epcon is known in the industry for the Soil Remediation Oxidizer, including Hazardous and Toxic Spills. Epcon Thermal OxidizerSystems, which operate in a very safe manner, clean up the toxic chemicals from the ground. We pre-test and pre-assemble the majority of systems in our 150,000 Sq. Ft. modern shop.

Chemical and Pharmaceutical Solutions

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

The application of VOC emission control equipment for the chemical and pharmaceutical industries requires a thorough knowledge and understanding of the customer's process and requirements, and having the ability to offer custom solutions. MEGTEC has years of experience in finding solutions to support the chemical industries worldwide. with our range of solutions including scrubbers and wet electrostatic precipitators, carbon adsorption systems for solvent recovery, distillation and purification equipment, and thermal oxidation systems.

Gas monitoring instruments and systems for greenhouse gas emissions from soil

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Measurement of greenhouse gases released from soil and water surface forms an important part of climate change study. Microbial activity in the soil or for instance the melting of permafrost releases greenhouse gases such as Methane and nitrous oxide N2O into the atmosphere. Measurement of the concentration for these gases inside an open-bottom soil chamber placed on the soil over time tells the emission rate (flux) per chamber footprint area.

Industrial air pollution control for the recycling and waste management

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

Water Treatment Solutions for Arsenic Removal

by Adedge Water Technologies, LLC     based in Buford, GEORGIA (US) (USA)

Compliance with the USEPA’s new maximum contaminant level (MCL) of 10 parts per billion (ppb) for arsenic affects thousands of small public water systems in the U.S. Among treatment options available, few are simple, proven, affordable, and reliable. AdEdge offers a line of packaged, pre-engineered drinking water treatment systems which are ideal for small public water systems such as schools, mobile home parks, shopping centers, subdivisions, and more.

Chlorinated hydrocarbons

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

The hazardous chlorinated hydrocarbons are completely destroyed without residue. There is no generation of hazardous by-products, e.g. dioxins.

Dioxins and furans

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

CTP's expertise in catalytic, adsorptive and regenerative thermal oxidation technology in nano gram purification makes it the best partner for these hazardous industrial processes.

Thermal waste gas purification of siliceous organic compounds

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

The cleaning problem of the heat exchangers was solved. The contaminants were destroyed efficiently and economically while steam for the production process was generated at no additional cost.

Air pollution control for the metal decorating industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

Air pollution control for the natural gas processing industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.

Emissions Monitoring for Steel Mills

by Opsis AB     based in Furulund, SWEDEN

Steel mills include a multitude of activities that generate gaseous emissions. Besides continuous emissions stack monitoring, the applications in a steel mill also include process mesaurements that provides important data to the operators in order to optimize the steel making process.

Disposal wells treatment for oil and gas industry

by MIOX Corporation     based in Albuquerque, NEW MEXICO (USA)

Treating the water being injected for disposal is not always considered by operators. This is likely costing you money in the long run. Removing iron, heavy metals, and treating out ammonia is a benefit to treating with MIOX’s mixed oxidant solution. While these are benefits of the technology, the most important is the elimination of bacteria which can cause Hydrogen Sulfide (H2S), corrosion pitting, poor injectivity and other problems, resulting in great well workover frequency. Treating injection wells does not need to be expensive, and can be treated as you inject.

Need help finding the right suppliers?

Let the XPRTs do the work for you