Only show results in Massachusetts? Ok

VOC Monitoring Applications

  • Premium

    VOCs Fugitive emissions detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which...

    By EyeCGas -OGI by OPGAL based in Karmiel, ISRAEL.

  • Premium

    VOC and HAP Abatement

    As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than 99%.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and being developed at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the coating industry

    Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the metal decorating industry

    Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with the emission capture, control and compliance hurdles that both composite and carbon fiber producers face. So much so that we have developed specific technologies that address the unique needs of our customers in both industries. Please visit our Carbon Fiber Page to explore Anguil`s proprietary oxidizer designs for furnace and oven emissions. On composite applications, firms continue to battle emission levels by lowering styrene content in the resins they utilize. However,...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from dryers and oven tunnel exhausts, and the capture of fugitive emissions. Over 300 successful printing installations...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Industrial chemical solutions for the chemical product manufacturing sector

    Chemical product manufacturing involves the handling of acids, carcinogenic and toxic chemicals, along with the emission of fumes that contain volatile organic compounds (VOCs), hazardous air pollutants (HAPs), and particulates.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Gas analyzers for clean air room monitoring

    The ambient air in clean air rooms needs to be constantly monitored for the safety of workers and of the production according to the environment. A clean air room is a room where the concentration of particles is controlled in order to minimize the introduction, the generation, retention of particles inside, for instance for chip production or the production of medicines.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Low level measurement of VOCs and Terpenes close to the sea and the Landes Forest

    It has been established that organic aerosol (OA) makes up for a major fraction of fine particulate matter in all region of the atmosphere. This fraction accounts approximately for half of the total PM2.5 dry mass.1,2 Primary OA is directly emitted in the troposphere from anthropological and natural sources whereas secondary OA (SOA) is formed in-situ in the atmosphere from the oxidation of biogenic or anthropogenic gas-phase precursors and subsequent partitioning of the less volatile products into the particle...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Gas analyzers and detectors for the ethanol processing

    Gas chromatographs and hydrocarbon analyzers can be key in adding value to the ethanol production process and protecting the environment from Volatile Organic Compound (VOC)emissions created during the process.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Miscellaneous solutions for the food & beverage industry

    The food manufacturing industry contains companies involved in processing raw food materials, packaging, and distributing them. This includes fresh, prepared foods as well as packaged foods. CECO delivers proven products and systems for a wide range of emission control, filtration and fluid handling challenges including volatile organic compound (VOC) abatement; mist elimination; acid gas scrubbing; dry particulate filtration; industrial dust; fume, mist and air handling systems; fluid handling; filtration; and...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    BTEX in Ambient Air Application using a High-Sensitivity PID

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Industrial chemical solutions for plastics and rubber products industry

    The plastics and rubber products industry involves facilities that manufacture tires, rubber and plastic hosing, belts, gaskets and seals, rubber goods, plastic film and sheet, laminated plastic products and plastic pipe, bottles, foam products and assorted plastic products. CECO commonly deliver proven products and systems for a wide range of emission control, air filtration and fluid handling challenges, including VOC abatement; dry particulate filtration; industrial dust, fume, mist and air handling systems;...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Gas monitoring instruments and systems for flavoring agents

    Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) values.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Industrial manufacturing solutions for the furniture industry

    The furniture manufacturing industry includes facilities that manufacture household furniture; office furniture; mattresses, shades, and blinds; custom architectural woodwork and millwork; and institutional furniture. CECO offers a wide range of safe, clean and efficient systems and solutions designed to meet a variety of air emissions and pollution control challenges, including mist elimination; volatile organic compound (VOC) abatement; acid gas scrubbing; dry particulate filtration; and industrial dust, fume,...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Industrial manufacturing solutions for the printing industry

    The printing industry covers facilities engaged in newspaper publishing and printing, lithographic printing, gravure printing and commercial printing. Ink production companies manufacture inkjet cartridges and printing and inkjet inks, including lithographic, flexographic, gravure and letterpress inks. These products are sold to commercial printers, newspaper and magazine printers, office supplies wholesalers and screen printers. There is a need to address a wide range of emission control, air filtration and...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Measuring aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. The Benzene, Toluene, Ethylbenzene, and Xylene`s in the gas sample are physically separated using proprietary GC columns.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Analysis of VOCs emissions from a car painting line

    During car manufacturing, Volatile Organic Compounds (VOCs) associated with the paints are emitted to the atmosphere. These are carcinogen, toxic and lead to tropospheric ozone formation. Therefore, VOC emissions must be reduced. With this aim, Chromatotec® airmoVOC C6-C12 (GC-FID analyzer) has been used to monitor VOC emissions from a car painting line. Indeed, it can measure concentrations ranging from very low (ppt) to high (ppm) level, so it is suitable for emission measurements. When coupled to MS...

    By Chromatotec Group based in Val de Virvée, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you