Environmental Industry Applications for Monitoring and ...

Premium

Visual inspection solutions for the borescope for engine inspection

Visual inspections of engines and other hard to visualize places are an important part of ongoing automotive maintenance. Rigid and flexible borescopes are a great way to visually inspect engines without having to dismantle the engine block, as they allow you to remotely visualize dark, small, and hard to reach places. Routine inspection with a borescope will allow you identify problem areas and to replace or repair parts before they are causing problem. Flexible borescopes can also be used to track through parts ...

By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

Premium

Mercury monitoring for mercury flux measurement

The Tekran 2537 has been used in numerous published studies to measure the deposition or evasion of mercury from natural or contaminated surfaces (i.e. flux measurements). It is anticipated that many mercury flux measurements will be needed in the future to assess the impact of climate change on mercury cycling in the environment. There are two basic ways to do mercury flux measurements. First, the dynamic flux chamber method utilizes a custom enclosure, with controlled air flow, to measure the inlet and outlet ...

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

Premium

Multiple-beams Wind Profile Lidar

The WindMast WP350 is a wind profile lidar with wavelength of 1.55μm, based on the principle of four-beam velocimetry. The wind speed information was retrieved, and vertical and horizontal profiles were calculated via power spectrum estimation of sampled echo signals through the measurement of the atmospheric wind ...

By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.

Premium

Monitors, gas analyzers solutions for understanding ISO 21501-4

Determination of particle size distribution—Single particle light interaction methods. ISO 14644-1:2015 introduces the need for particle counters calibrated to ISO 21501-4. The calibration methods assure data accuracy and repeatability. The methods outlined in ISO 14644 and ISO 21501-4 represent an important step in more accurate evaluations of clean room contamination and improved process control. ISO 21501, Determination of particle size distribution—Single particle light interaction methods, ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).

Premium

Heavy metal analysis for laboratories

By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY.

Premium

Process monitoring solutions for special applications processes

OPSIS is a world-leading supplier of gas monitoring systems for various special applications in the process control sector. The OPSIS process monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive process control systems. We also provide additional products and services, including dust and flow ...

By OPSIS AB based in Furulund, SWEDEN.

Premium

Measurements Solutions for Wear & Volume Analysis

Measuring volumetric properties of a surface is most often used in wear analysis of lubricated surface but has uses in many other applications such as adhesion, porosity, and particle ...

By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).

Premium

Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions

ISO 14644-1:2015 continues to pose challenges to cleanroom managers and manufacturers. Here we provide several sources of information to help everyone from those new to this ISO regulation to veterans in the field. Our team of regulatory experts have put together a package of information so you can easily understand the requirements and what you need to do to meet them. Get a summary of ISO 14644-1:2015 by reading the paper below or watching the recorded webinar at the right. We also have FAQs and a paper to learn ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).

Premium

Application of respirometry system for denitrification testing

Anoxic denitrification requires the presence of an organic substrate to serve as an electron donor. This case study shows how respirometry was used to determine the effect of C/N ratio on denitrification rates. Such testing can be used to determine optimum internal recycle rates or supplemental carbon addition to biological denitrification ...

By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).

Premium

Gas analyzers and monitoring systems for container monitoring sector

In addition to miscellaneous products, shipping containers might contain toxic gases that present health hazards for workers opening or unloading them. Gasmet manufactures portable and powerful gas analyzers for measuring these hazardous gases inside enclosed spaces. With our solutions, you can measure vast variety of gases simultaneously in ...

By Gasmet Technologies Oy based in Vantaa, FINLAND.

Premium

Measurements Solutions for Form & Flatness

Manufactured surfaces can take on many shapes and sizes. For surfaces where the characterization of shape is function critical, ZYGO laser interferometers and 3D optical profilers stand out with sub-nanometer repeatability of non-contact surface data. Incorporating industry standards for form and flatness into Mx™ analysis software creates a single stop measurement tool for surface inspection. Explore the solutions for your application in surface form and flatness metrology ...

By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).

Premium

Respirometry solutions for monitoring the activity of mixed-liquor solids sector

Sample Type: Mixed liquor solids from an activated sludge process MVLSS = 1320 ...

By Challenge Technology based in Springdale, ARKANSAS (USA).

Premium

Ultrasound measurement instrumentation solutions for cleaning mechanisms sector

Ultrasonic cleaning relies on the mechanical agitation from sound pressure that disrupts the surface boundary layer to allow particles to detach and flow into the bulk ...

By Onda Corporation based in Sunnyvale, CALIFORNIA (USA).

Premium

Respirometry System for Anaerobic Toxicity Testing

This example shows the results of dosing an anaerobic culture with three concentrations of an industrial cleaning agent followed by respirometric measurement of methane production. The threshold toxic concentration was less than 80 mg/L of product and 600 mg/L produced a 50% decrease in methane production ...

By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).

Premium

Flame Photometer for Measurement of Sodium and Potassium in Dried Milk

Dried milk was dissolved into an aqueous solution for analysis via flame photometry. The test solutions and reference solutions are measured directly following dilution with deionised distilled ...

By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.

Premium

Visual inspection solutions for the borescope for casting inspections

Casting is a manufacturing process that is used to make countless metal objects every day. Many of these metal pieces are extremely intricate and used as parts to make up larger complex machines, systems or units, such as engines, turbines, medical equipment etc. Inspecting these casting, before and during use is beneficial to maintaining the systems they make up. A rigid or flexible borescope is often the easiest, most efficient and fastest way to inspect the finer details inside of metal ...

By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

Premium

Visual inspection solutions for the duct HVAC inspections

Duct (HVAC) cleaning is an important part of maintaining good air quality in any building, if ducts are not being cleaned properly, air polluted by dust and other fine particles that can be harmful, will be circulated throughout the system. The best way to ensure ducts are being cleaned completely is to visually inspect them, this can now be accomplished using HVAC inspection cameras. These CCTV cameras are composed of a digital inspection camera attached to a push rod to enable the camera to access all parts of ...

By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

Premium

Desulfurization on-line continuous monitoring solution

SO2 is one of several important pollutants in the atmosphere, SO2 from the atmosphere can stimulate people's respiratory tract, abate respiratory function, and lead to respiratory resistance decreased, induce various inflammation of respiratory tract, harm to human health. SO2 also is harm to many plants. SO2 and its generated sulfuric acid mist can corrode metal surfaces and cause damage to paper products, textiles, leather products. It may also form acid rain, which is serious harm to the ecological system and ...

By Hangzhou Zetian Technology based in Hangzhou, CHINA.

Premium

Application of respirometry system for biodegradation testing

The pattern of oxygen uptake– relative to that for a control substrate – gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample. In this case, samples #2 and #3 showed a much lower biodegradation rate than the ...

By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).

Premium

Flue gas heavy metals on-line continuous monitoring solutions

According to US EPA IO - 3.3 standard method of heavy metals, flue gas heavy metals analyzer uses XRF nondestructive testing technology and flue gas automatic enrichment technology to realize the accurate measurement of flue gas heavy metals such as waste incineration plants, cement plants, thermal power plants, ...

By Hangzhou Zetian Technology based in Hangzhou, CHINA.