Applications

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY.

Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

From cutting-edge MABR wastewater treatment to containerized desalination, Fluence delivers cost-effective and sustainable solutions for commercial customers worldwide. Fluence has more than 30 years of experience in the design, construction, and operation of water and wastewater treatment plants for commercial clients, including resorts, golf courses, commercial buildings, and campuses.

By Fluence Corporation based in White Plains, NEW YORK (USA).

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY.

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY.

Fluence MABR (membrane aerated biofilm reactor) technology address the critical challenges of wastewater treatment plants for: nutrient reduction, high effluent quality, compliance with regulations, minimized energy consumption, at a small footprint, whil

By Fluence Corporation based in White Plains, NEW YORK (USA).

Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Immense global competition has compelled the automobile industry to optimize processes and improve energy efficiency. Continuous and effective production processes are key factors to meeting these challenges. Kurita is your competent partner for all questions concerning water and waste water management as well as paint detackifying. With more than 60 years of experience, we offer the most technically up-to-date water and process treatment solutions. Our highly qualified engineers will gladly advise you on how to...

By Kurita based in Tokyo, JAPAN.

Vacuum evaporators and concentrators: ZLD technology. Sustainable. Customized. No manufacturer of vacuum evaporators has more experience than ECO-Techno. More than 3,100 "Made in Italy" plants make wastewater free processes possible for leading industrial application.

By Eco-Techno SRL. based in Busnago MB, ITALY.

In primary clarification, a portion of the suspended solids and organic matter is removed from the wastewater. This removal is usually accomplished with physical operations such as sedimentation. The effluent from primary clarification will ordinarily contain organic matter and have notable BOD. The principle function of primary clarification is to be a precursor to secondary clarification. Following primary clarification, the treated water is suitable for many agricultural and industrial uses. However, it will...

By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

WesTech leads the way in municipal sedimentation solutions for primary and secondary clarification. Customers around the world benefit from the Clarifier Optimization Package (COP), which provides clean effluent, maximizes overflow rates, and optimizes underflow concentration.

By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

Groundwater Treatment: WesTech offers a wide variety of equipment for groundwater treatment for potable use. Whether your treatment objective is gas removal, nitrate removal, iron and manganese removal, color removal, softening, or even filtering a source under the direct influence of surface water, WesTech has your solution.

By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

Water is our most precious commodity. Drinking water is becoming more and more scarce as a result of rising demand and the drying up of resources. Particularly in arid regions such as the Middle East, Africa and increasingly in Southern Europe, the situation is deteriorating dramatically.

By Kurita based in Tokyo, JAPAN.

Water is used for a wide variety of purposes in industrial production. Water has to be treated, so that sufficient amounts are available in the quality required for production. Process water must generally be re-treated after it has been used, so that it can either be discharged according to regulations or returned to the water cycle.

By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY.

The wide range of Pieralisi decanters is in fact successfully used by over 15,000 customers around the world for the volume reduction of biological and physical/chemical sludge of both Municipal and Industrial origin.

By Pieralisi Group based in Jesi, ITALY.

Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because...

By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA).

Hydraulic designing for the water treatment industry.

By Innovative Hydraulics based in Wexford, PENNSYLVANIA (USA).