- Bucket Elevator Components - Elevator Buckets
- Bucket Elevator Components - Elevator Bolts
- Bucket Elevator Components - Elevator Belts
- Bucket Elevator Components - Belt Fasteners
- Bucket Elevator Components - Elevator Chains
- Bucket Elevator Components - Elevator Drums
- Chain Conveyor Components - Forged Chains
- Chain Conveyor Component - Bolt and Go Chains
- Chain Conveyor Components - Sprockets & Trailers
- Chain Conveyor Components - Round Link & Misc. Chains
- Electronic Monitoring Equipment - Hazard Monitors
- Electronic Monitoring Equipment - Bearing Temperature Sensors
- Electronic Monitoring Equipment - Alignment Sensors
- Material Handling - Elevator Buckets & Cups - Agricultural Buckets
- Electronics - Speed Switches
- Electronics - Level Indicators
- Electronics - Inductive Proximity Sensors
- Electronics - Pull Switch
- Electronic Monitoring Equipment - Speed Switches
- Electronic Monitoring Equipment - Inductive Sensors
- Electronic Monitoring Equipment - Conveyor Safety Switches
- Electronic Monitoring Equipment - Level Indicators
- Electronic Monitoring Equipment - Alarms & Displays
- 4B Nylathane Industrial Elevator Buckets
4B Group products
Bucket Elevator Components - Elevator Belts
4B Group - Model SBR - Abrasion-Resistant Elevator Belt
4B elevator belting is of laminar construction, to give high impact resistance coupled with low stretch at working tension. The EP carcass comprises a woven textile construction having low stretch polyester fabric warp (along its length) and impact resistant polyamide fabric weft (across the width). The low stretch characteristics of the belt are achieved using the high strength textile fabric which is pre-tensioned during the manufacturing process. This process limits the maximum stretch in the belt, at working strength, to 1.5%.
4B Group - Model NBR - Oil-Resistant Elevator Belts
NBR Nitrile provides good resistance to oil and fat. Suitable for products containing oils and fat up to 100°C.
4B Braime - Model NBR+K- ISO 340\284 - Flame Retardant, Highly Oil Resistant Elevator Belt
Suitable for use in ATEX applications. -Recommended for use in equipment / installations where there is a risk of fire or explosion.
4B Group - Model Frasor-ISO 340\284 - Flame Retardant, Anti-Static and Oil Resistant Elevator Belt
Recommended for use in equipment/installations where there is a risk of fire or explosion. Suitable for handling cereals and products with moderate levels of oil, such as soya.
4B Group - Steel Web Elevator Belt
4B`s STEEL WEB belt is a rubber elevator belt with a special steel cord core. The cords provide low elongation with high elasticity in the length, and cross rigidity in the width. The built-in elasticity allows running over slightly crowned pulleys which greatly improves belt tracking. The rigid weft cords act as a barrier to ripping and tearing which increases the holding ability for the bucket bolts. This produces a good cross rigid belt resulting in excellent straight tracking characteristics. In contrast, most conventional steel cable belts lack elasticity and consequently have to run over truly flat, cylindrical pulleys which increases the risk of belts off tracking.
4B Group - Model ISO 340/284 - Hot Oil and Fire Retardant Elevator Belt
This special belt offers resistance to the combination of fats and oils and higher processing temperature up to 120°C in often humid working environments. The belt is specially aimed at solving high temperature problems in processing of soya beans, cattle feed, rape seed and fat processing.
4B Group - Model T150 - Heat Resistant Elevator Belt
Suitable for applications in elevators handling products of up to 150°C and short peaks of 180°C. Used in the cement, coal, dry chemicals, fly ash industries. Use special 3+3 covers to prevent heat reaching the carcass. For further advice contact technical department.