24 products found
Abanaki Corporation Products
-
Skimmer
-
Abanaki Grease Grabber - Belt Oil Skimmer
The Abanaki Grease Grabber is a dependable and effective means of skimming oil and floating grease from water, under the most demanding conditions. The Grease Grabber makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the skimmer belt to attract grease, oil, and other hydrocarbon liquids as the belt passes through the surface of the ...
-
Li l Blue - Portable Belt Skimmer
The economical solution to remove unwanted oil in coolants & parts washers! Effective. Removes one (1' wide belt) gallon or more of medium weight oil per hour. Compact. Use it almost anywhere...even through a 2' dia. bunghole in a drum.. Portable. Use it here today, there tomorrow. Weights only 6 pounds, installs in seconds and runs on 110 v. power. Complete. Put it to work right out of the box, or add the optional, easy-to-install decanter and ...
-
Mighty Mini - SST Oil Skimmer
The ideal solution to unwanted oil in coolants and parts washers therefore extending the life of cooling and wash water! The Abanaki Mighty Mini SST can remove 1 to 2 gallons of medium weight oil per hour (depending on belt selection). Its stainless steel construction enables it to operate in harsh chemicals and heat while its integrated timer lets it run only when needed. The Mighty Mini SST is designed to minimize water content in the disposed ...
-
Oil Boss - Industrial Oil Skimmer
Setting New Standards for Industrial Oil Skimmers.A Unique Method of Oil Removal Abanaki's unique method magnetic drive allows both sides of the belt to pick up floating oil, doubling the capacity for a given belt width. Result? A compact unit with faster oil pick-up, better oil-to-water pick-up ratio, and fewer drive line ...
-
Oil Concentrator - Water and Oil Separator
The Abanaki Oil Concentrator provides virtually complete oil/water separation for recycling or disposal of either liquid. Under most operating conditions, Abanaki skimmers pick up oil with only small traces of water. However, as surface oil is reduced to a thin layer (1/16 inch thick or less), more water (or coolant) may be picked up along with the oil. When used in tandem with an oil skimmer, the Oil Concentrator solves this problem by providing final ...
-
Oil Grabber - Model 4 - Belt Oil Skimmer
The Abanaki Model 4 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 4 alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment before filtration, and in conjunction with coalescing ...
-
Abanaki Oil Grabber - Model 8 - Belt Oil Skimmer
The Abanaki Model 8 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, oil skimmers alone will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 8 alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment before filtration, and in conjunction with ...
-
Abanaki Oil Grabber - Model MB - Oil Skimmer
The Abanaki Model MB Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model MB alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment before filtration, and in conjunction with a coalescing ...
-
PetroPuck
The PetroPuck™, when used in the proper environment, practically eliminates remaining traces of oil. It works best when used in conjunction with a bulk oil removal system, such as an oil skimmer. In many cases, the pucks bring oil levels down to those deemed acceptable for discharge. The PetroPuck™ tablet treats 1000 gallons of fluid by releasing numerous 'bugs' that attack the fluid and consume the oil left after processing. After a month, the result ...
-
PetroXtractor - Well Oil Skimmer for Hydrocarbons Removal
The Abanaki PetroXtractor is a dependable and cost effective means of removing oil, fuel, and other floating hydrocarbons from water where access to the fluid surface is limited. It provides efficient remediation of groundwater contaminated by oil, using existing recovery and monitoring wells. Often, the PetroXtractor Belt Oil Skimmer working alone will reduce oil or fuel content to an acceptable E.P.A. level. Models are available for ...
-
Q-VAC 100
The hard-working Q-VAC™ 100 wet vacuum thoroughly removes coolant from your machine sumps for optimal equipment operation and suctions all types of wet industrial spills to prevent injury and damage. And, it gets the job done quickly, quietly, and virtually maintenance-free, running on compressed ...
-
Tote-It
The Tote-It's patented design is a dependable and effective means of removing oil from water. The single assembly unit can be used in any application where 115 VAC, 60 Hz power is available. The Tote-It utilizes a continuous belt and wiper to remove up to 12 gallons of oil per hour from the fluid surface. The belt operates on a motor and pulley system attached to a stabilizer bar that is immersed in the contaminated liquid. After traveling over the head ...
-
PetroXtractor - Active Membrane Skimmer
Cost effectively remove floating hydrocarbons (LNAPLs) from groundwater. The PetroXtractor Active Membrane Skimmer is a combination remediation pump and filter that fits inside a 2-inch (I.D.) piezometer or monitoring well. Fully automatic, it recovers hydrocarbons at a depth up to 130 feet. The pneumatic pump automatically turns off when no recovered liquid is present, eliminating the need for continuous air consumption and extending pump ...
-
Coolant Maintenance
-
EconoMini - Belt Oil Skimmer
The EconoMini belt oil skimmer is an ultra-compact belt oil skimmer designed for use in coolant sump and parts washer applications. The skimmer can fit in tight spaces where other skimmers ...
-
Chiperator - Chip and Coolant Separation System
Chip and Coolant Separation System. The air driven Chiperator vacuums and filters old cutting fluids loaded with chips from machine sumps, tanks and parts washers. When the optional Abanaki"s Lil" Blue skimmer is purchased, the coolant will also be cleansed of tramp ...
-
Cool Disk Skimmer
The inexpensive way to remove unwanted tramp oils from coolants and parts washers, but with all the quality that you expect from ...
-
Mighty Disk - Tramp Oil Skimmer
The inexpensive way to remove unwanted tramp oils from coolants and parts washers, but with all the quality that you expect from Abanaki! Effective. Removes up to 1 1/2 gallons of oil or more of medium weight oil per hour. Compact. Use it almost anywhere a flat surface is available for mounting. Portable. Weighs less than 10 pounds, installs in no time, and runs on 110v power. Complete. Put it to work right out of the ...
-
Mighty Mini - SST Belt Oil Skimmer
The ideal solution to remove unwanted oil in coolants & parts washers! Effective. Removes one (1" wide belt) or two (2" wide belt) gallons or more of medium weight oil per hour. Compact. Use it almost anywhere...even through a 2" dia. bunghole in a drum. Portable. Use it here today, there tomorrow. Weighs only 7 pounds, installs in seconds and runs on 110v. power. 220v motor available. Complete. Put it to work right out of the box, or add the ...
-
TubeTastic! - Tube Oil Skimmer
The Abanaki TubeTastic! oil skimmer can be used on machining centers with little or no access to the coolant sump from above. This unit can skim oil from chip conveyors or even totally enclosed machining ...
-
EconoMixer
EconoMixer 100 Coolant Proportioning Mixer and Dispenser drum or wall mounted proportioners automatically mix liquid coolant concentrates with water and dispense the diluted solution into any sump or container. The EconoMixer 200 is designed for speed, accuracy, and cost savings. Simply insert the unit into a 15 – 55 gallon drum of coolant concentrate and connect a water line to the ...
-
Coolescer Coolant Refresher
The Abanaki Coolescer is a must for any machine shop dealing with machine tool coolant. This unit will extend coolant life, reduce disposal costs, eliminate down time, improve tool life and help prevent ...
-
Coolant Mints
Put an end to that nasty rotten egg smell. Safe to handle and easy to use Eliminates coolant odors immediately by neutralizing hydrogen sulfide gases Not a perfume No disposal problems Contains no formaldehyde Safer and less expensive than biocides 1 tablet per week maintains 25 gallons of coolant 15 tablets per ...
-
Abanaki Aerators
Prevents anaerobic bacteria from building up and spreading Extends coolant life Eliminates the ''rotten egg'' smell Quality airstone diffuser disperses air evenly 2 units available: AA1200 injects 1200 cc/min air for small sumps AA5000 injects 5000 cc/min injects for large ...
-
ChillyBits
The ChillyBits air chiller uses compressed air to produce cold air to directly cool bits and tooling during machining operations. Eliminates mist cooling Uses no Freon Magnetic base for easy mounting Extends tool life Adjustable tip for precision ...