Amith Garment Services
Refine by
Families
34 products found
Amith Garment Services products
Q-Test - Fabric Thickness Tester [Digital Display]
✓ 0.001 mm Accuracy ✓ Latest model with modern aesthetics. ✓ Portable and handy to carry anywhere. ✓ Standard load 78.5g is supplied along with pressure foot dia 10mm. ✓ Digital display for measuring thickness in millimetres. ✓ Hardened stem for trouble free clamping. ✓ Option of 0.01mm or 10-micron accuracy digital thickness gauge is also available with us at extra cost.
Q-Test - Fabric Tear Strength Tester
Supplied with 2 extra calibrated weights to increase capacity of machine from 1600 gm to 3200 gm and to further 6400 gm. Adjustable knife to adjust pre-cut length 20 mm. Supplied with three calibrated weight to calibrate each range. Adjustable foots for levelling the equipment. It gives very accurate results between 20 – 80 % of the capacity. All components are made of high quality, mild - steel with chrome plating to ensure trouble free working of machine. However, 1600 gms weight is done in brass. Accessories include template, Allen key and extra cutting blade.Garment Testing Equipments
Button Snap Pull Tester
To determine the pulling strength required for any type of button/ snaps to remove from garments once attached.
Button Impact Tester
Used to measure impact resistance of buttons to impulsive force on buttons.
Q-Test - Computerized Twist Tester
✓ Determine yarn twist in single plied and open-end yarns. ✓ Rigid model with 20-inch variable specimen length. ✓ All components made in stainless steel to offer long life and trouble free operations. ✓ Pre- settable digital counter will display number of twists in the yarn. ✓ Microprocessor based operation. ✓ Direct TPI / TPM results in digital display for selected gauze length. ✓ No manual calculations required. ✓ Adjustable variable speed control option. ✓ Automatic twist measuring system can interface any type of RS 232 enabled twist tester. ✓ Output statistics: Mean, CV%, SD, Q95(+/-), Min, Max. ✓ Reports: Daily, weekly, monthly, frame wise, count wise, operator wise, lot wise, shift wise with graphical charts.
Q-Test - Spray Tester
✓ To measure the resistance of fabrics to wetting by water. ✓ Completely made of 316 grade stainless steel. ✓ Specimen kept at 45-degree angle and 150 mm below the spray nozzle. ✓ Spray nozzle is made up of brass material. ✓ The height of the centre of the nozzle is 150 mm above the centre point of the test specimen. ✓ Plastic tray is provided to collect sprayed water. ✓ Appearance of the specimen is compared against photographic chart. ✓ Pilling photographic chart is available with us at extra cost.
Q-Test - Motorized Wrap Reel
✓ To produce skeins of yarn of a pre-determined length and number of turns for count/ denier and strength testing. ✓ Capacity of 5 cops. ✓ Digital presettable counter. ✓ The reel circumference with 1.50 yards or 1 meter. ✓ Pre-selection of 30/60/120 yards of skein. ✓ Digital display with pre-programmable up to 999 revolutions. ✓ Specially designed bobbin holding stand, which can accommodate bobbins dia up to 100 mm. ✓ Bobbins stand is equipped with a yarn-tensioning device. ✓ Customer need to specify required reel circumference at the time of ordering. ✓ Customer also required to suggest maximum package diameter to design suitable creel stand.
Q-Test - Hot Air Oven [Perspiration and Dry Tester]
Used for perspiration & oven dry tests. ✓ 18” X 18” X 18” inside chamber dimension. ✓ Supplied with adjustable stainless-steel trays to hold samples. ✓ Circulating fan is provided for uniformity. ✓ Accuracy maintained by using energy regulator. ✓ Load indicator indicates heater status. ✓ 1 blower to maintain uniform temperature inside chamber. ✓ Perspirometer available with us at extra cost.Q-Test - Tensile Strength Tester [Digital]
To determine tensile strength of fabric and seam strength of garments. ✓ Tensile tester comes with load cell of 250 kg capacity. ✓ Machine is fitted with peak and zero facility and overloads protection facility. ✓ Jaw separation 25 -600 mm. ✓ Traverse speed –100 & 300mm/min fixed. ✓ Digital display of load and elongation-works on (Constant Rate Extension) CRE principle. ✓ Selectable force unit: kgf, lbf and Nf ✓ Selectable elongation unit: mm and inch ✓ Lea strength can ascertain in the same machine. ✓ Load cell of 500 kg and 100 grams sensitivity is available with us at extra cost.