Amith Garment Services
Refine by
Families
8 products found
Amith Garment Services products
Garment Testing Equipments
Button Snap Pull Tester
To determine the pulling strength required for any type of button/ snaps to remove from garments once attached.
Button Impact Tester
Used to measure impact resistance of buttons to impulsive force on buttons.
Q-Test - Computerized Twist Tester
✓ Determine yarn twist in single plied and open-end yarns. ✓ Rigid model with 20-inch variable specimen length. ✓ All components made in stainless steel to offer long life and trouble free operations. ✓ Pre- settable digital counter will display number of twists in the yarn. ✓ Microprocessor based operation. ✓ Direct TPI / TPM results in digital display for selected gauze length. ✓ No manual calculations required. ✓ Adjustable variable speed control option. ✓ Automatic twist measuring system can interface any type of RS 232 enabled twist tester. ✓ Output statistics: Mean, CV%, SD, Q95(+/-), Min, Max. ✓ Reports: Daily, weekly, monthly, frame wise, count wise, operator wise, lot wise, shift wise with graphical charts.
Q-Test - Spray Tester
✓ To measure the resistance of fabrics to wetting by water. ✓ Completely made of 316 grade stainless steel. ✓ Specimen kept at 45-degree angle and 150 mm below the spray nozzle. ✓ Spray nozzle is made up of brass material. ✓ The height of the centre of the nozzle is 150 mm above the centre point of the test specimen. ✓ Plastic tray is provided to collect sprayed water. ✓ Appearance of the specimen is compared against photographic chart. ✓ Pilling photographic chart is available with us at extra cost.
Q-Test - Motorized Wrap Reel
✓ To produce skeins of yarn of a pre-determined length and number of turns for count/ denier and strength testing. ✓ Capacity of 5 cops. ✓ Digital presettable counter. ✓ The reel circumference with 1.50 yards or 1 meter. ✓ Pre-selection of 30/60/120 yards of skein. ✓ Digital display with pre-programmable up to 999 revolutions. ✓ Specially designed bobbin holding stand, which can accommodate bobbins dia up to 100 mm. ✓ Bobbins stand is equipped with a yarn-tensioning device. ✓ Customer need to specify required reel circumference at the time of ordering. ✓ Customer also required to suggest maximum package diameter to design suitable creel stand.
Q-Test - Hot Air Oven [Perspiration and Dry Tester]
Used for perspiration & oven dry tests. ✓ 18” X 18” X 18” inside chamber dimension. ✓ Supplied with adjustable stainless-steel trays to hold samples. ✓ Circulating fan is provided for uniformity. ✓ Accuracy maintained by using energy regulator. ✓ Load indicator indicates heater status. ✓ 1 blower to maintain uniform temperature inside chamber. ✓ Perspirometer available with us at extra cost.Q-Test - Tensile Strength Tester [Digital]
To determine tensile strength of fabric and seam strength of garments. ✓ Tensile tester comes with load cell of 250 kg capacity. ✓ Machine is fitted with peak and zero facility and overloads protection facility. ✓ Jaw separation 25 -600 mm. ✓ Traverse speed –100 & 300mm/min fixed. ✓ Digital display of load and elongation-works on (Constant Rate Extension) CRE principle. ✓ Selectable force unit: kgf, lbf and Nf ✓ Selectable elongation unit: mm and inch ✓ Lea strength can ascertain in the same machine. ✓ Load cell of 500 kg and 100 grams sensitivity is available with us at extra cost.